Gregs Maker Corner | Part 11. Voron 0.2 Build - Mini Stealthburner @GregsMakerCorner | Uploaded February 2023 | Updated October 2024, 4 hours ago.
In this video I go through the process of assembling the Mini Stealthburner, followed by installing a dragon hot end and setting it onto the Carriage. (The steps will be similar for other hot ends as well). This is a very detailed walkthrough and I try to follow just about every step in the manual. I show some tricks that I use to safely install heat inserts, using a simple bic style lighter and a long m3x40 screw.
The Mini Stealthburner is a significant improvement over the V0.1 Mini Afterburner. I was very impressed by how easy it was to install, in comparison. I think this is one of the best features of the new V0.2 and also plan to have a future video talking about performance and how well it prints.
My build was sponsored by Boxxy Prints. Get your 3d printed parts here:
boxxyprints.com/product/v0-1-printed-parts-kit/?v=0a10a0b3e53b
Printed part colors are from Fusion Filaments, Cosmic Ray Blue and Alpha Particle Orange ABS 1.5.
fusionfilaments.com/collections/abs-1-5-filament
Powder Coated Extrusions are from DLLPDF. These extrusions, at the time of the video are Mitsumi. They are powder coated and exactly 15mm x 15mm (the coating adds a small amount of thickness). I purchased a full v0.2 extrusion kit.
dllpdf.com/v0.2
Tool Recommendations: (not all were mentioned in this intro video, but are used later in my build):
**Disclosure: these are AFFILIATE LINKS- costs you nothing extra, and helps my channel
Components:
SKR Pico: amzn.to/3E0lZk5
Stepper online motors: amzn.to/3YoN6h4
Mellow Fly SHT 36 V2: boxxyprints.com/product/mellow-fly-sht-36-v2-0/?v=0a10a0b3e53b * I planned to use this, but went BTT EBB36 due to a firmware issue.
BTT EBB36: amzn.to/3xdaphQ (I used V1, but this is V1.2)
Tools:
PA-09 Engineer Crimping tool: amzn.to/3aLgZB9
Hakko Soldering Station: amzn.to/3FZtsiM
Hakko Heat Insert Tool: amzn.to/3aLh6N5
Small Finishing Sander: amzn.to/3FTwt4p
Metal Ruler: amzn.to/3n5YsoQ
Small Screwdriver Set: amzn.to/3DNNc7h
Heavy Duty Scissors: amzn.to/3DObKNm
Bondhus Hex Drivers (Ball Driver): amzn.to/3vpjti8
Wiha Hex Drivers: amzn.to/3vp5Tv4
Titan Ratcheting Crimper: amzn.to/3aKaONE
Ferrule Crimping Tool: amzn.to/2Z3axDb
Consumables:
Blue Permatex: amzn.to/3ATPmjE
Isopropyl Alcohol (Spray Bottle): amzn.to/3lRp1Pe
JST XH Connector Kit (Fan connectors, Motor Connectors, etc.): amzn.to/3BTMYuM
Synthetic Lube: amzn.to/3FUyptf
Synthetic Oil: amzn.to/3BW2TZE
Blue Permatex: amzn.to/3ATPmjE
Voron 0.1 Discord Link:
discord.com/invite/voron
In this video I go through the process of assembling the Mini Stealthburner, followed by installing a dragon hot end and setting it onto the Carriage. (The steps will be similar for other hot ends as well). This is a very detailed walkthrough and I try to follow just about every step in the manual. I show some tricks that I use to safely install heat inserts, using a simple bic style lighter and a long m3x40 screw.
The Mini Stealthburner is a significant improvement over the V0.1 Mini Afterburner. I was very impressed by how easy it was to install, in comparison. I think this is one of the best features of the new V0.2 and also plan to have a future video talking about performance and how well it prints.
My build was sponsored by Boxxy Prints. Get your 3d printed parts here:
boxxyprints.com/product/v0-1-printed-parts-kit/?v=0a10a0b3e53b
Printed part colors are from Fusion Filaments, Cosmic Ray Blue and Alpha Particle Orange ABS 1.5.
fusionfilaments.com/collections/abs-1-5-filament
Powder Coated Extrusions are from DLLPDF. These extrusions, at the time of the video are Mitsumi. They are powder coated and exactly 15mm x 15mm (the coating adds a small amount of thickness). I purchased a full v0.2 extrusion kit.
dllpdf.com/v0.2
Tool Recommendations: (not all were mentioned in this intro video, but are used later in my build):
**Disclosure: these are AFFILIATE LINKS- costs you nothing extra, and helps my channel
Components:
SKR Pico: amzn.to/3E0lZk5
Stepper online motors: amzn.to/3YoN6h4
Mellow Fly SHT 36 V2: boxxyprints.com/product/mellow-fly-sht-36-v2-0/?v=0a10a0b3e53b * I planned to use this, but went BTT EBB36 due to a firmware issue.
BTT EBB36: amzn.to/3xdaphQ (I used V1, but this is V1.2)
Tools:
PA-09 Engineer Crimping tool: amzn.to/3aLgZB9
Hakko Soldering Station: amzn.to/3FZtsiM
Hakko Heat Insert Tool: amzn.to/3aLh6N5
Small Finishing Sander: amzn.to/3FTwt4p
Metal Ruler: amzn.to/3n5YsoQ
Small Screwdriver Set: amzn.to/3DNNc7h
Heavy Duty Scissors: amzn.to/3DObKNm
Bondhus Hex Drivers (Ball Driver): amzn.to/3vpjti8
Wiha Hex Drivers: amzn.to/3vp5Tv4
Titan Ratcheting Crimper: amzn.to/3aKaONE
Ferrule Crimping Tool: amzn.to/2Z3axDb
Consumables:
Blue Permatex: amzn.to/3ATPmjE
Isopropyl Alcohol (Spray Bottle): amzn.to/3lRp1Pe
JST XH Connector Kit (Fan connectors, Motor Connectors, etc.): amzn.to/3BTMYuM
Synthetic Lube: amzn.to/3FUyptf
Synthetic Oil: amzn.to/3BW2TZE
Blue Permatex: amzn.to/3ATPmjE
Voron 0.1 Discord Link:
discord.com/invite/voron
