Uploaded June 2014 | Updated September 2026, 1 week ago
Fly with Parrot Bebop Drone + Sky Controller and Oculus Rift up to 2 km in Full HD (1080p) !
Fly further, higher
Equipped with an amplified Wi-Fi 36 dBm radio and with four antennas, the Parrot Skycontroller extend the Wi-Fi range up to 2kms! The piloting smartphone or tablet is fixed on a shelf that is compatible with the vast majority of smartphones & tablets available on the market. The pilot takes the helm of the drone via two ultra precise joysticks. For extreme sensations, it is possible to connect FPV (First Person View) glasses to the Parrot Skycontroller with the HDMI. FPV glasses compatibility: Oculus Rift, Zeiss Cinemizer, Epson Moverio, Sony Personal Viewer... Enjoy the latest innovations in FPV for fully immersive flights with Parrot Bebop Drone EXTENDED RANGE pack.
Parrot Skycontroller technical data:
− Android 4.2
− Wi-Fi 802.11 a/b/g/n up to 36dBm
− Antennas directives range up to 2km
− Wi-Fi MIMO 2.4 and 5GHz
− Second chipset Wi-Fi to connect to a tablet
− GPS
− USB, HDMI extensions
− Sun-visor included
− Weight: 450g
Parrot Bebop Drone technical data :
Connectivity
Wi-Fi 802.11a/b/g/n/ac
Wi-Fi antennas: MIMO dual-band with 2 double-set of ceramic antennas for 2.4 and 5 GHz (Fig.7)
Sending power: Up to 26 dBm
Signal range: Up to 300 meters
Structure
High-resistance
4 Brushless Outrunner motors (Fig.3)
Glass fiber reinforced (15%) ABS structure (Fig.4)
High-resistance EPP outdoor hull: Clip and unclip easily to adapt to indoor and outdoor flight, protects the propellers against potential bumps, can be removed to reduce wind factor (Fig.9)
Three-blade auto-block propellers in Polycarbonate with fast disassembly system (Fig.5)
Anti-vibration bumpers (Fig.10)
Camera
CMOS 14Mpx, 1/2.3"
Camera with "Fisheye" lens 180° 1/2,3": 6 optical elements and 14 Mega pixels sensor (Fig.2)
Video stabilization: Digital on 3-axes
Video definition: 1920x1080p (30fps)
Photo definition: 3800x3188 pixels
Video encoding: H264
Photo file format: RAW, DNG
Battery
Lithium Polymer
Lithium Polymer 1200 mAh
Flight time: Around 12 minutes
Processor
CPU: Dual-Core
Mother board: (Fig.1)
- Parrot P7 dual-core CPU Cortex 9
- Quad core GPU
- 8Gb flash memory
All fixed on a magnesium shelf that acts as electromagnetic shielding and as a radiator
Operating system: Linux
Developping: Open-source SDK
Sensors
3-axes
3-axes magnetometer
3-axes gyroscope
3-axes accelerometer (Fig.6)
Optical-flow sensor (Fig.8): Vertical stabilization camera (Every 16 milliseconds, an image of the ground is taken and compared to the previous one to determine the speed of the Bebop Drone)
Ultrasound sensor (Analyzes the flight altitude up to 8 meters)
Pressure sensor
Geo-location
GNSS
GNSS (GPS + GLONASS + Galileo)
Dimensions
28x32x3.6cm
28x32x3.6cm without the hull
33x38x3.6cm with the hull
Weight
380g - 400g
380g without the hull - 400g with the hull
Compatibility
iOS, Android
iOS, Android Smartphones/tablets
read more here : parrot.com/usa/products/bebop-drone
Fly with Parrot Bebop Drone + Sky Controller and Oculus Rift up to 2 km in Full HD (1080p) !
Fly further, higher
Equipped with an amplified Wi-Fi 36 dBm radio and with four antennas, the Parrot Skycontroller extend the Wi-Fi range up to 2kms! The piloting smartphone or tablet is fixed on a shelf that is compatible with the vast majority of smartphones & tablets available on the market. The pilot takes the helm of the drone via two ultra precise joysticks. For extreme sensations, it is possible to connect FPV (First Person View) glasses to the Parrot Skycontroller with the HDMI. FPV glasses compatibility: Oculus Rift, Zeiss Cinemizer, Epson Moverio, Sony Personal Viewer... Enjoy the latest innovations in FPV for fully immersive flights with Parrot Bebop Drone EXTENDED RANGE pack.
Parrot Skycontroller technical data:
− Android 4.2
− Wi-Fi 802.11 a/b/g/n up to 36dBm
− Antennas directives range up to 2km
− Wi-Fi MIMO 2.4 and 5GHz
− Second chipset Wi-Fi to connect to a tablet
− GPS
− USB, HDMI extensions
− Sun-visor included
− Weight: 450g
Parrot Bebop Drone technical data :
Connectivity
Wi-Fi 802.11a/b/g/n/ac
Wi-Fi antennas: MIMO dual-band with 2 double-set of ceramic antennas for 2.4 and 5 GHz (Fig.7)
Sending power: Up to 26 dBm
Signal range: Up to 300 meters
Structure
High-resistance
4 Brushless Outrunner motors (Fig.3)
Glass fiber reinforced (15%) ABS structure (Fig.4)
High-resistance EPP outdoor hull: Clip and unclip easily to adapt to indoor and outdoor flight, protects the propellers against potential bumps, can be removed to reduce wind factor (Fig.9)
Three-blade auto-block propellers in Polycarbonate with fast disassembly system (Fig.5)
Anti-vibration bumpers (Fig.10)
Camera
CMOS 14Mpx, 1/2.3"
Camera with "Fisheye" lens 180° 1/2,3": 6 optical elements and 14 Mega pixels sensor (Fig.2)
Video stabilization: Digital on 3-axes
Video definition: 1920x1080p (30fps)
Photo definition: 3800x3188 pixels
Video encoding: H264
Photo file format: RAW, DNG
Battery
Lithium Polymer
Lithium Polymer 1200 mAh
Flight time: Around 12 minutes
Processor
CPU: Dual-Core
Mother board: (Fig.1)
- Parrot P7 dual-core CPU Cortex 9
- Quad core GPU
- 8Gb flash memory
All fixed on a magnesium shelf that acts as electromagnetic shielding and as a radiator
Operating system: Linux
Developping: Open-source SDK
Sensors
3-axes
3-axes magnetometer
3-axes gyroscope
3-axes accelerometer (Fig.6)
Optical-flow sensor (Fig.8): Vertical stabilization camera (Every 16 milliseconds, an image of the ground is taken and compared to the previous one to determine the speed of the Bebop Drone)
Ultrasound sensor (Analyzes the flight altitude up to 8 meters)
Pressure sensor
Geo-location
GNSS
GNSS (GPS + GLONASS + Galileo)
Dimensions
28x32x3.6cm
28x32x3.6cm without the hull
33x38x3.6cm with the hull
Weight
380g - 400g
380g without the hull - 400g with the hull
Compatibility
iOS, Android
iOS, Android Smartphones/tablets
read more here : parrot.com/usa/products/bebop-drone
