Uploaded January 2025 | Updated November 2026, 1 hour ago
In this video, part of the All Things Immersive series, James takes a look at the Immersive Pan control in Pro Tools and looks at one of the main rules to mixing music in Dolby Atmos..... How should you pan your lead vocal? It's not as simple as you might think.
#dolbyatmos
#protools
#dolbyatmosmusic
00:00 Introduction
01:02 Pro Tools Immersive Panner
01:26 Immersive Panner - Overview
02:11 LFE / Sub Send
03:10 New Controls - Height & Centre
03:45 Panning to the centre.
05:26 Centre audio demo
06:56 Divergent Controls
08:13 Sign off
In this video, part of the All Things Immersive series, James takes a look at the Immersive Pan control in Pro Tools and looks at one of the main rules to mixing music in Dolby Atmos..... How should you pan your lead vocal? It's not as simple as you might think.
#dolbyatmos
#protools
#dolbyatmosmusic
00:00 Introduction
01:02 Pro Tools Immersive Panner
01:26 Immersive Panner - Overview
02:11 LFE / Sub Send
03:10 New Controls - Height & Centre
03:45 Panning to the centre.
05:26 Centre audio demo
06:56 Divergent Controls
08:13 Sign off


![Can ONE Mic Record a Whole Drum Kit
How few microphones do you actually need to record a drum kit? Were kicking off a three-part series to find out, and were starting with the ultimate minimalist challenge: one mic, one kit, nowhere to hide.
James Curtis Thomas and I each picked one microphone and one position. JCT went for a Lauten Audio LA-120 small-diaphragm condenser out in front of the kit, wide cardioid, low-pass at 15k to tame the cymbals. I went old school with an AIM Audio Inspire overhead, roughly where Ringos engineers at Abbey Road would have put it. Then, because I cant help myself, I threw a Myburgh M1 valve mic into the mix to see whether thousands of pounds worth of microphone changes the answer.
Full disclosure: I helped develop the AIM mics, so bear that in mind when I say nice things about them. Everything is recorded with no EQ, no compression, no processing. Just mics, Neve 1073 OPX preamps and my kit.
What you need to know:
🎛️ Lauten Audio LA-120: small-diaphragm FET condenser with swappable cardioid/omni capsules and switchable high- and low-cut filters
🎛️ AIM Audio Inspire: multi-pattern large-diaphragm condenser with switchable transformer or electronic output, made in Berlin. The Inspire + Pack is around £729
🎛️ Myburgh M1: German-made valve mic with a Thiersch M7 capsule. Very much the special occasion end of the price list
🎛️ All mics through Neve 1073 OPX preamps, completely unprocessed
Which would you pick for a one-mic drum sound: in front of the kit, or over the top? Let me know in the comments.
Chapters
0:00 The one-mic drum challenge
1:20 JCTs pick: Lauten Audio LA-120 in front of the kit
2:41 My pick: AIM Audio Inspire overhead
4:00 Recording the kit
4:50 Listening: AIM Audio Inspire
6:15 Listening: Lauten LA-120
7:31 Comparing the two
9:03 Both mics together
9:50 Swapping in the Myburgh M1
11:07 Preamps and signal chain: Neve 1073 OPX
12:28 Recording with the Myburgh M1
13:06 Myburgh M1 vs Lauten LA-120
16:00 The verdict
17:34 Final thoughts
If you are in the market for any of these mics please do click the link to our sales partner Thomann - https://thmn.to/thocf/3vyhxookng
🔗 Lauten Audio LA-120: [ADD LINK]
🔗 AIM Audio Inspire: [ADD LINK]
🔗 Myburgh M1: https://www.myburgh.eu
🔗 Part 2, Recording Drums With 2 Microphones: [ADD LINK]
🔗 Record at my studio: https://locationrecordings.co.uk
👍 If you enjoyed this, hit like and subscribe. Parts 2 and 3 are coming, with more microphones. Who knew? Can ONE Mic Record a Whole Drum Kit](https://i.ytimg.com/vi/Po48yVuZGwg/mqdefault.jpg)







