Over 4000 Tool Changes, ZERO Failures?! InfiMech MX Pro First Look @theedgeoftech
Over 4000 Tool Changes, ZERO Failures?! InfiMech MX Pro First Look  @theedgeoftech
Uploaded November 2026 | Updated November 2026, 4 hours ago
Over 4,000 tool changes and ZERO failed prints?! 🀯 The InfiMech MX Pro might be one of the most interesting multicolor 3D printers I've tested!

In this video, we're taking a first look at the **InfiMech MX Pro**, an eight-toolhead 3D printer designed to make multicolor printing faster, more efficient, and dramatically less wasteful.

But here's what really surprised me: **This isn't even a production machine!** InfiMech sent me a prototype to test, and so far, the experience has been surprisingly smooth. Assembly was incredibly easy, the printer worked practically right out of the box, and I haven't experienced a single failed print!

One of my favorite prints, a multicolor Majora's Mask from The Legend of Zelda, required nearly 3,800 tool changes on its own and completed successfully!

But is this really the future of multicolor 3D printing? And can InfiMech deliver on its ambitious claims?

Today, we're checking out what makes this printer different, showing off four sets of prints, and discussing what still needs testing before my full review.

πŸš€ **CHECK OUT THE INFIMECH MX PRO:**
kickstarter.com/projects/infimech-mx-series/infimech-mx-3d-printer-8x-more-efficiency-8x-less-waste?ref=9cph51&utm_source=youtube&utm_medium=kol&utm_campaign=mx_launch&utm_content=KOL_TheEdgeOfTech

πŸ” **IN THIS VIDEO:**
- A first look at the InfiMech MX Pro prototype
- Eight interchangeable toolheads and reduced filament waste
- Induction heating technology
- Filament blob detection using photoelectric sensors
- Closed-loop X and Y motors designed to recover from lost steps
- Klipper firmware and Orca Slicer
- Easy assembly and first impressions
- Four sets of 3D prints, including Majora's Mask
- What I plan to test in the full review

🎭 **MAJORA'S MASK MODEL ON MAKERWORLD:**
makerworld.com/en/models/105338-multicolour-majora-s-mask?from=search#profileId-321056

⚠️ **DISCLAIMER:**
InfiMech provided this prototype printer for testing, and it will be returned after the evaluation. This video shares my personal hands-on experience with a pre-production machine. The final production version may differ. Manufacturer performance claims have not all been independently verified. Kickstarter projects involve risks, and backing a campaign does not guarantee delivery.

πŸ’¬ **LET'S TALK!**

What do you think of the InfiMech MX Pro? Would you prefer eight separate toolheads over a traditional multicolor filament system?

And what would you like to see me test in the full review?

Let me know in the comments!

πŸ‘ If you enjoyed this video, give it a thumbs up!

πŸ”” Subscribe to The Edge of Tech for more 3D printer reviews, tutorials, first looks, and 3D printing projects!

#InfiMech #InfiMechMXPro #3DPrinting #Multicolor3DPrinting #3DPrinterReview
Over 4000 Tool Changes, ZERO Failures?! InfiMech MX Pro First LookTurn Any Photo Into A Keychain In Minutes With Maker Lab! FREE!Opening Night At An AliExpress Singles’ Day Offline Pop Up Shopping Event With Swae Lee!The Mingda Magician X2 Really First Look And Test Prints#HotMakes Ep 184 - Let’s Get Artsy w/ mrcollectit!This Crazy 3D Printing Project Is Made From SLS Parts!HotMakes Episode 146 - RMRRF Recap w/ Event Crew! 3,000+ Attendees???How To Clear Broken Filament Jam From A Bambu Lab AMS (Its Easy!)
The Edge of Tech |

Over 4000 Tool Changes, ZERO Failures?! InfiMech MX Pro First Look

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER