Uploaded February 2021 | Updated November 2026, 3 hours ago
*** Because of a change to how activator rails eject mobs, this design no longer works correctly. new design available here - similar features but one wide per villager and better integration of the breeder: youtube.com/playlist?list=PLjEQB4cIGf3olTd0N0jGI7PTlZ-RaplNo ***
***Fix for 1.19.50+ please read bottom of description or pinned comment***
A change to how zombies target mobs in 1.19.50 means that the design needs a small modification. The blocks between villager cells at foot level should be changed for top slabs on both sides of every villager. It might be easier to do this from below if you can avoid the zombie :)
I'd also recommend having two beds in this trading hall. That prevents the village from being destroyed if the villager connected to a single bed is zombified or killed. By having two beds, the village stays intact and your workstations won't get scrambled
Also, if you want to get a zombie to carry a sword, it is easiest to do this by dispensing the sword onto the zombie.
Welcome guys and gals, this is the full tutorial for my Bedrock Edition Advanced Trading Hall for 1.16.100 or later, with lots of automation for loading villagers, re-rolling their trades, individually zombifying them for maximum permanent discounts. I've even added an emergency pull cord in case some baddies get into your trading hall and start attacking your hard earned mending villager.
It will work on any Bedrock Edition platform including MCPE/Mobile, XBOX, PS4, PS5, Windows 10 and Switch.
Being the advanced trading hall, this is a bit more complicated to build than my simple trading hall, but the automation it gives you will be well worth the effort. No more breaking and replacing a lectern 50 times to get the enchanted book you want. No more wrangling zombies to attack your villagers and almost zero effort to get villagers into your trading hall.
If you build this please let me know in the comments!
Just a note for those on lower simulation distances (6 or less): You can't be 100 blocks away from your breeder and within simulation distance, so you'll have to follow your minecart to the breeder, or build your breeder in the sky (at least 76 blocks) above the trading hall with a way to call down one villager at a time.
If you would prefer something simpler, with just automatic zombification, you can check out my other video here: youtu.be/O_SefgkgSUs
If you need help finding chunk borders: youtu.be/kOIsJTKQ-d0
If you need a simple, but effective villager breeder: youtu.be/xQ9VL0_ggWs
Or if you want to see more of the advanced villager breeder I used in this video, there's a showcase of it here: youtu.be/qEeOGlcKzMM
***Fix for 1.19.50+***
A change to how zombies target mobs in 1.19.50 means that the design needs a small modification. The blocks between villager cells at foot level should be changed for top slabs on both sides of every villager. It might be easier to do this from below if you can avoid the zombie :)
I'd also recommend having two beds in this trading hall. That prevents the village from being destroyed if the villager connected to a single bed is zombified or killed. By having two beds, the village stays intact and your workstations won't get scrambled
Also, if you want to get a zombie to carry a sword, it is easiest to do this by dispensing the sword onto the zombie.
*** Because of a change to how activator rails eject mobs, this design no longer works correctly. new design available here - similar features but one wide per villager and better integration of the breeder: youtube.com/playlist?list=PLjEQB4cIGf3olTd0N0jGI7PTlZ-RaplNo ***
***Fix for 1.19.50+ please read bottom of description or pinned comment***
A change to how zombies target mobs in 1.19.50 means that the design needs a small modification. The blocks between villager cells at foot level should be changed for top slabs on both sides of every villager. It might be easier to do this from below if you can avoid the zombie :)
I'd also recommend having two beds in this trading hall. That prevents the village from being destroyed if the villager connected to a single bed is zombified or killed. By having two beds, the village stays intact and your workstations won't get scrambled
Also, if you want to get a zombie to carry a sword, it is easiest to do this by dispensing the sword onto the zombie.
Welcome guys and gals, this is the full tutorial for my Bedrock Edition Advanced Trading Hall for 1.16.100 or later, with lots of automation for loading villagers, re-rolling their trades, individually zombifying them for maximum permanent discounts. I've even added an emergency pull cord in case some baddies get into your trading hall and start attacking your hard earned mending villager.
It will work on any Bedrock Edition platform including MCPE/Mobile, XBOX, PS4, PS5, Windows 10 and Switch.
Being the advanced trading hall, this is a bit more complicated to build than my simple trading hall, but the automation it gives you will be well worth the effort. No more breaking and replacing a lectern 50 times to get the enchanted book you want. No more wrangling zombies to attack your villagers and almost zero effort to get villagers into your trading hall.
If you build this please let me know in the comments!
Just a note for those on lower simulation distances (6 or less): You can't be 100 blocks away from your breeder and within simulation distance, so you'll have to follow your minecart to the breeder, or build your breeder in the sky (at least 76 blocks) above the trading hall with a way to call down one villager at a time.
If you would prefer something simpler, with just automatic zombification, you can check out my other video here: youtu.be/O_SefgkgSUs
If you need help finding chunk borders: youtu.be/kOIsJTKQ-d0
If you need a simple, but effective villager breeder: youtu.be/xQ9VL0_ggWs
Or if you want to see more of the advanced villager breeder I used in this video, there's a showcase of it here: youtu.be/qEeOGlcKzMM
***Fix for 1.19.50+***
A change to how zombies target mobs in 1.19.50 means that the design needs a small modification. The blocks between villager cells at foot level should be changed for top slabs on both sides of every villager. It might be easier to do this from below if you can avoid the zombie :)
I'd also recommend having two beds in this trading hall. That prevents the village from being destroyed if the villager connected to a single bed is zombified or killed. By having two beds, the village stays intact and your workstations won't get scrambled
Also, if you want to get a zombie to carry a sword, it is easiest to do this by dispensing the sword onto the zombie.










