Uploaded June 2022 | Updated November 2026, 3 hours ago
We finally got the Rotary Powered ATV dialed in! We started off by re-doing our jackshaft system using a Comet 94c Driver Pulley and 780 series Driven pulley from Gopowersports. Next we re-geared the jackshafts and corrected the centerline distance for the pulleys to get proper belt engagement. After that we added a new rear brake master cylinder, tightened the chain up and took it for a test drive. Couldn't be happier with the results, it pops huge wheelies and is an absolute blast to ride. We were hitting about 40mph and it still has more in it!
Thanks for watching and stay tuned for the next video!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only**
PARTS LINKS | Build Break Repeat is Proudly Sponsored by GoPowerSports and Hobart Welders
GPS PARTS:
780 series driven pulley - gopowersports.com/780-driven-pulley-3-4-bore-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driver pulley - gopowersports.com/780-driver-clutch-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft Brackets - gopowersports.com/adjustable-jackshaft-brackets-weld-on/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft - gopowersports.com/3-4-jackshaft-not-threaded-19-long/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Sprocket - gopowersports.com/jackshaft-sprocket-type-b-420-3-4-bore/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Locking Collar - gopowersports.com/jackshaft-lock-collar-3-4/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
1” Lock Collars - gopowersports.com/bearing-3-4-1-3-8od/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
¼” Keystock - gopowersports.com/key-1-4-x-1-1-4-long-6123/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
AMAZON AFFILIATE PARTS:
Comet 94C 30mm 1:10 taper driver pulley - amzn.to/3GSmU6l
Brake Master Cylinder - amzn.to/3x5tLFf
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
--------------TOOLS -------------
Tools we use and have received from sponsors:
Hobart Welding Products
hobartwelders.com
Texas Metalworks 40x80 Welding Table
texasmetalworks.com/product/fully-fabricated-welding-table
RogueFab Tubing Notcher
roguefab.com/product/versanotcher-universal-tubing-notcher
SWAG Offroad PortaBand Table
swagoffroad.com/products/swag-portaband-pro-table
Pro-tools Tubing Bender
pro-tools.com/collections/tube-and-pipe-benders
Optrel Crystal 2.0 Welding Mask
usa.optrel.com/en/eye_protection_helmets/products/show/crystal20
Optrel Grinding Mask
usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx
----------MUSIC ---------
Intro Song - Jimmi by Andrew Applepie
youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
---------MERCH----------
CHECK OUT OUR INSTAGRAM! instagram.com/build.break.repeat?igshid=ulwwhmio96an
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/stores/build-break-repeat
00:00 - 3:00 Intro and Overview
3:00 - 5:33 New Jackshaft Setup
5:33 - 6:33 Test Drive No.1
6:33 - 10:03 New Pulleys and Re-gear
10:03 - 11:52 Test Drive and Wheelies!
11:52 - 13:17 Outro
We finally got the Rotary Powered ATV dialed in! We started off by re-doing our jackshaft system using a Comet 94c Driver Pulley and 780 series Driven pulley from Gopowersports. Next we re-geared the jackshafts and corrected the centerline distance for the pulleys to get proper belt engagement. After that we added a new rear brake master cylinder, tightened the chain up and took it for a test drive. Couldn't be happier with the results, it pops huge wheelies and is an absolute blast to ride. We were hitting about 40mph and it still has more in it!
Thanks for watching and stay tuned for the next video!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only**
PARTS LINKS | Build Break Repeat is Proudly Sponsored by GoPowerSports and Hobart Welders
GPS PARTS:
780 series driven pulley - gopowersports.com/780-driven-pulley-3-4-bore-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driver pulley - gopowersports.com/780-driver-clutch-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft Brackets - gopowersports.com/adjustable-jackshaft-brackets-weld-on/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft - gopowersports.com/3-4-jackshaft-not-threaded-19-long/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Sprocket - gopowersports.com/jackshaft-sprocket-type-b-420-3-4-bore/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Locking Collar - gopowersports.com/jackshaft-lock-collar-3-4/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
1” Lock Collars - gopowersports.com/bearing-3-4-1-3-8od/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
¼” Keystock - gopowersports.com/key-1-4-x-1-1-4-long-6123/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
AMAZON AFFILIATE PARTS:
Comet 94C 30mm 1:10 taper driver pulley - amzn.to/3GSmU6l
Brake Master Cylinder - amzn.to/3x5tLFf
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
--------------TOOLS -------------
Tools we use and have received from sponsors:
Hobart Welding Products
hobartwelders.com
Texas Metalworks 40x80 Welding Table
texasmetalworks.com/product/fully-fabricated-welding-table
RogueFab Tubing Notcher
roguefab.com/product/versanotcher-universal-tubing-notcher
SWAG Offroad PortaBand Table
swagoffroad.com/products/swag-portaband-pro-table
Pro-tools Tubing Bender
pro-tools.com/collections/tube-and-pipe-benders
Optrel Crystal 2.0 Welding Mask
usa.optrel.com/en/eye_protection_helmets/products/show/crystal20
Optrel Grinding Mask
usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx
----------MUSIC ---------
Intro Song - Jimmi by Andrew Applepie
youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
---------MERCH----------
CHECK OUT OUR INSTAGRAM! instagram.com/build.break.repeat?igshid=ulwwhmio96an
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/stores/build-break-repeat
00:00 - 3:00 Intro and Overview
3:00 - 5:33 New Jackshaft Setup
5:33 - 6:33 Test Drive No.1
6:33 - 10:03 New Pulleys and Re-gear
10:03 - 11:52 Test Drive and Wheelies!
11:52 - 13:17 Outro










