Uploaded May 2026 | Updated November 2026, 4 hours ago
In this video we will look at how to 3D Print a case for the OuiSpy device that can hold a battery, charging circuit, and power switch. This will make the OuiSpy self powered and completely portable. I use mine on a keychain so I can run FlockYou every time I drive my car!
The original OuiSpy assembly tutorial can be found here:
youtube.com/watch?v=AAJYcsFGzfg
Colonel Panics Website: https://colonelpanic.tech/
github.com/colonelpanichacks/oui-spy
3D Printed files can be found here:
thingiverse.com/thing:7345517
Battery can be purchased here:
amzn.to/4xlJpKC
Charging Circuit can be purchased here:
amzn.to/425cdZQ
Power Switch can be purchased here:
amzn.to/3QXR29A
M3x25 screws and M3 nuts can be purchased here:
amzn.to/49pUCzF
In this video we will look at how to 3D Print a case for the OuiSpy device that can hold a battery, charging circuit, and power switch. This will make the OuiSpy self powered and completely portable. I use mine on a keychain so I can run FlockYou every time I drive my car!
The original OuiSpy assembly tutorial can be found here:
youtube.com/watch?v=AAJYcsFGzfg
Colonel Panics Website: https://colonelpanic.tech/
github.com/colonelpanichacks/oui-spy
3D Printed files can be found here:
thingiverse.com/thing:7345517
Battery can be purchased here:
amzn.to/4xlJpKC
Charging Circuit can be purchased here:
amzn.to/425cdZQ
Power Switch can be purchased here:
amzn.to/3QXR29A
M3x25 screws and M3 nuts can be purchased here:
amzn.to/49pUCzF










