Uploaded July 2021 | Updated November 2026, 1 day ago
There are many great inexpensive laser engravers available, but they all have the same problem, they don't have an enclosure. This is why I show you how to build your own easy and cheap laser enclosure at home with minimal tools. Even without much building experience you should be able to complete this project in a weekend and make your Laser engraver much more usable. I show how to build an enclosure for my Ortur Laser Master 2 Pro, but I also show how to take measurements, so you can make your enclosure fit your laser.
Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.tech
The products I mentioned in this video (affiliate links):
-----------------------------------------------------------------------------------------------------------------
Orange acrylic sheet on Amazon: amzn.to/2UbEnmx
Exhaust fan:
Aliexpress: https://s.click.aliexpress.com/e/_98XpNy
Amazon: amzn.to/3rdkvLH
Ducting:
Aliexpress: https://s.click.aliexpress.com/e/_AbwTqm
Amazon: amzn.to/2VBekFC
Ortur Laser Master 2 Pro:
MadeTheBest.com: bit.ly/3xDjP4v
Aliexpress: https://s.click.aliexpress.com/e/_ATAVme
Amazon: amzn.to/3ksD2SS
Laser Master 2 (non Pro):
MadeTheBest.com: bit.ly/3gQGsM1
Aliexpress: https://s.click.aliexpress.com/e/_9xxz2e
-----------------------------------------------------------------------------------------------------------------
Support me (for free) while shopping online (affiliate links):
-----------------------------------------------------------------------------------------------------------------
Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6
GearBest: gearbest.com/?lkid=11143361
Banggood: banggood.com/custlink/D3G3GMUOYL
Amazon (US): amzn.to/2pJVveJ
Amazon (DE): amzn.to/2pK1YFx
eBay.com: ebay.us/xd6vPa
eBay.de: ebay.us/AwHtLQ
CDKDeals: cdkdeals.com/ap/cdkey-home
Madethebest: https://www.madethebest.com?aff=40
-----------------------------------------------------------------------------------------------------------------
My links:
-----------------------------------------------------------------------------------------------------------------
Instagram: instagram.com/datulabtech
Website: https://datulab.tech
Store: https://store.datulab.tech
Builds.gg: builds.gg/users/datulabtech-86151
Thingiverse: thingiverse.com/DatulabTech
Github: github.com/datulab
E-Mail: info@datulab.tech
-----------------------------------------------------------------------------------------------------------------
00:00 Introduction
01:50 Support me with Affiliate Links
03:02 Figuring out the Size
06:53 Where to get Orange Acrylic
08:50 Cutting Wood
10:20 Exhaust System
12:43 Assembly
14:46 Attaching the Lid
16:46 Mounting the Exhaust
17:47 Optional Base
19:10 Satisfying Peal
19:58 Testing
23:53 Conclusion and Pricing
#lasermaster2pro #howto #laserenclosure
There are many great inexpensive laser engravers available, but they all have the same problem, they don't have an enclosure. This is why I show you how to build your own easy and cheap laser enclosure at home with minimal tools. Even without much building experience you should be able to complete this project in a weekend and make your Laser engraver much more usable. I show how to build an enclosure for my Ortur Laser Master 2 Pro, but I also show how to take measurements, so you can make your enclosure fit your laser.
Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.tech
The products I mentioned in this video (affiliate links):
-----------------------------------------------------------------------------------------------------------------
Orange acrylic sheet on Amazon: amzn.to/2UbEnmx
Exhaust fan:
Aliexpress: https://s.click.aliexpress.com/e/_98XpNy
Amazon: amzn.to/3rdkvLH
Ducting:
Aliexpress: https://s.click.aliexpress.com/e/_AbwTqm
Amazon: amzn.to/2VBekFC
Ortur Laser Master 2 Pro:
MadeTheBest.com: bit.ly/3xDjP4v
Aliexpress: https://s.click.aliexpress.com/e/_ATAVme
Amazon: amzn.to/3ksD2SS
Laser Master 2 (non Pro):
MadeTheBest.com: bit.ly/3gQGsM1
Aliexpress: https://s.click.aliexpress.com/e/_9xxz2e
-----------------------------------------------------------------------------------------------------------------
Support me (for free) while shopping online (affiliate links):
-----------------------------------------------------------------------------------------------------------------
Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6
GearBest: gearbest.com/?lkid=11143361
Banggood: banggood.com/custlink/D3G3GMUOYL
Amazon (US): amzn.to/2pJVveJ
Amazon (DE): amzn.to/2pK1YFx
eBay.com: ebay.us/xd6vPa
eBay.de: ebay.us/AwHtLQ
CDKDeals: cdkdeals.com/ap/cdkey-home
Madethebest: https://www.madethebest.com?aff=40
-----------------------------------------------------------------------------------------------------------------
My links:
-----------------------------------------------------------------------------------------------------------------
Instagram: instagram.com/datulabtech
Website: https://datulab.tech
Store: https://store.datulab.tech
Builds.gg: builds.gg/users/datulabtech-86151
Thingiverse: thingiverse.com/DatulabTech
Github: github.com/datulab
E-Mail: info@datulab.tech
-----------------------------------------------------------------------------------------------------------------
00:00 Introduction
01:50 Support me with Affiliate Links
03:02 Figuring out the Size
06:53 Where to get Orange Acrylic
08:50 Cutting Wood
10:20 Exhaust System
12:43 Assembly
14:46 Attaching the Lid
16:46 Mounting the Exhaust
17:47 Optional Base
19:10 Satisfying Peal
19:58 Testing
23:53 Conclusion and Pricing
#lasermaster2pro #howto #laserenclosure










