CurryKitten | OpenIPC Build part 3: Connecting up a Flight controller and configuring telemetry for the OSD @CurryKitten | Uploaded 7 months ago | Updated 2 days ago
Welcome to part 3 of my OpenIPC project. In this video, I'll be covering the essential (but easy - well, much easier than the flashing parts) task of connecting and configuring your flight controller and setting up telemetry so you can see the state of your model on the OSD.
Thanks to the sponsor of this video, PCBWay. Don't forget to check out pcbway.com for PCB prototyping, 3D printing, and more!
Some of what's going on refers to the step-by-step setup documentation I originally wrote (and people have been updating and enhancing - yay!) you can see it here github.com/OpenIPC/wiki/blob/master/en/A-step-by-step-guide-for-an-FPV-setup.md
The store for OpenIPC is here store.openipc.org Quick disclaimer: I'm not involved/affiliated in any of this, and haven't seen any of these boards in person, but from my personal view - it looks a lot better than having to flash things yourself!!
If you liked this video and want to show your support please feel free to join my Patreon supporters here patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me
Welcome to part 3 of my OpenIPC project. In this video, I'll be covering the essential (but easy - well, much easier than the flashing parts) task of connecting and configuring your flight controller and setting up telemetry so you can see the state of your model on the OSD.
Thanks to the sponsor of this video, PCBWay. Don't forget to check out pcbway.com for PCB prototyping, 3D printing, and more!
Some of what's going on refers to the step-by-step setup documentation I originally wrote (and people have been updating and enhancing - yay!) you can see it here github.com/OpenIPC/wiki/blob/master/en/A-step-by-step-guide-for-an-FPV-setup.md
The store for OpenIPC is here store.openipc.org Quick disclaimer: I'm not involved/affiliated in any of this, and haven't seen any of these boards in person, but from my personal view - it looks a lot better than having to flash things yourself!!
If you liked this video and want to show your support please feel free to join my Patreon supporters here patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me
