DigiKey | Open Sauce 2024 - The Byte Sized Engineer | DigiKey @digikey | Uploaded June 2024 | Updated October 2024, 1 week ago.
Follow along with Zach as he walks through Open Sauce 2024. Zach reflects on the event and what it means to both the people who exhibited their projects as well as the spectators. Zach visits the DigiKey booth and talks with David Sandys, the Senior Director of Technical Marketing and Content, about why DigiKey chose to attend the event and what they hope to accomplish.
Experiential Robotics Platform Kit: digikey.com/short/0cqzwz1b
Byte Sized Engineer channel - youtube.com/@bytesizedengineering
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X twitter.com/digikey
Follow along with Zach as he walks through Open Sauce 2024. Zach reflects on the event and what it means to both the people who exhibited their projects as well as the spectators. Zach visits the DigiKey booth and talks with David Sandys, the Senior Director of Technical Marketing and Content, about why DigiKey chose to attend the event and what they hope to accomplish.
Experiential Robotics Platform Kit: digikey.com/short/0cqzwz1b
Byte Sized Engineer channel - youtube.com/@bytesizedengineering
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X twitter.com/digikey
![Chard GPT [Maker Update] | Maker.io](https://i.ytimg.com/vi/UuTPFqu35po/hqdefault.jpg "Chard GPT [Maker Update] | Maker.io
This week on Maker Update: talking with your plants, 3D printed light sculpture, building a blinky patch bay, magic shutdown, custom gears, and a crash course on every Dremel bit.
+Show Notes [Maker Update Ep.386]+
=Project of the Week=
Talk to Anything Using AI by Matt Reed 0:26
https://www.redpepper.land/blog/little-shop-of-conversations-talk-to-plants-using-ai
=More Projects=
Light Geometry: Building a Voronoi LED Uplight Decorative Lamp By andrei.erdei 1:34
https://www.instructables.com/Light-Geometry-Building-a-Voronoi-LED-Uplight-Deco/
Building a Keystep Pro Patch Bay by Blitz City DIY 2:35
https://www.youtube.com/watch?v=mWCxitBAL5U
=Tips & Tools=
Magic Shutdown Button for Raspberry Pi by Charlyn Gonda 3:02
https://charlyn.codes/magic-button/
How to Use Every Dremel Bit by Logs Carving Club (via Gars Tips and Tools) 3:24
https://www.youtube.com/watch?v=glEW8K9kn64
How to Make Custom Gears for Beginners Jeremy Fielding 3:47
https://www.youtube.com/watch?v=DKE36Y5VGYs
=DigiKey Spotlight=
Sensors on DigiKey 4:08
https://www.digikey.com/en/products/category/sensors-transducers/25
#makerupdate
Maker Update is a weekly video series covering news, projects, tips, and events that interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/")
![Lets Cyber [Maker Update] | Maker.io](https://i.ytimg.com/vi/W9-7abM7iKA/hqdefault.jpg "Lets Cyber [Maker Update] | Maker.io
This week on Maker Update: new chrome available, a print a day keeps the laser cutter away, homebrew cable, and a farewell to calibration cubes.
+Show Notes [Maker Update Ep.369]+
=Project of the Week=
Motorized Mantis Blades by Zibartas 0:27
https://www.youtube.com/watch?v=xhH7lQ1SKPA
=More Projects=
3D Printed Printing Plates by Pete Prodoehl 2:25
https://rasterweb.net/raster/2024/01/28/3d-printed-printing-plates/
Tiny Cyberdeck by Michael Klements 3:14
https://www.the-diy-life.com/make-a-tiny-raspberry-pi-based-cyberdeck/
Homelab Cable Setup by clabretro 4:08
https://www.youtube.com/watch?v=W7m7OW2xrJE
=Tips & Tools=
No More Calibration Cubes by CNC Kitchen 4:43
https://www.youtube.com/watch?v=H7OsnMLDIMw
Soldering Solutions Contest on Printables 5:44
https://www.printables.com/contest/425-soldering-solutions
CAD in Blender with Geometry Nodes by Joe Bowers 6:08
https://makezine.com/article/digital-fabrication/3d-printing-workshop/making-blender-do-things-that-cad-can-only-dream-of/
Sanjay Mortimer Tribute by Zack Freedman 6:49
https://www.youtube.com/watch?v=Mm8sz6CB9ys
=DigiKey Spotlight=
Selecting a Wireless Communication Technology 7:30
https://www.youtube.com/watch?v=kWGiSya5Vu0
#makerupdate
Maker Update is a weekly video series covering news, projects, tips, and events that interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/")
![Bigger, Meatier, Craftier [Maker Update] | Maker.io](https://i.ytimg.com/vi/WWTWzlhcXzU/hqdefault.jpg "Bigger, Meatier, Craftier [Maker Update] | Maker.io
This week on Maker Update: a sandwich on the ceiling, ClapTrap’s new Clappers, the Raspberry Pi Pico 2, and the holy grail of WLED controllers.
This week on Maker Update: a sandwich on the ceiling, ClapTrap’s new Clappers, the Raspberry Pi Pico 2, and the holy grail of WLED controllers.
+Show Notes [Maker Update Ep.396]+
=Project of the Week=
Party Sub Projector Screen by Aunt Dena 0:32
https://youtu.be/YCj9rRRdH48?si=uuE_JwHiHBH6yJvz
=News=
Raspberry Pi Pico 2 2:29
https://www.raspberrypi.com/products/raspberry-pi-pico-2/
Pico 2 vs. Original Pico: What’s New? by Travis Foss on Maker.io
https://www.digikey.com/en/maker/blogs/2024/raspberry-pi-pico-2-vs-original-pico-whats-new
Raspberry Pi Pico 2 footage from Jeff Geerlings review:
https://www.youtube.com/watch?v=oXF_lVwA8A4
=More Projects=
Animatronic Claptrap by Mr Volt 3:21
https://www.youtube.com/watch?v=s0fjvyjnHgA
Ford RS Gauge Cluster by Upir 4:15
https://www.youtube.com/watch?v=ugS3rKBZVVc
Worlds Smallest Bike by Stuff Made Here 4:53
https://www.youtube.com/watch?v=YqywL9PkM2s
=Tips & Tools=
Mecanum Wheels with Jememy Fielding 5:37
https://www.youtube.com/watch?v=AlsCUzCCc-k
Best WLED Controller by Chris Maher 6:13
https://www.youtube.com/watch?v=0a-Y2CMrAiU
Full Color PCBs by JLCPCB by Anne Barela 7:05
https://learn.adafruit.com/colorful-creations-with-the-new-jlcpcb-pcb-service
=DigiKey Spotlight=
Becky Sterns NeoPixel Halloween Costume Guide 7:50
https://www.youtube.com/watch?v=zcUCzLpnNXo
#makerupdate
Maker Update is a weekly video series covering news, projects, tips, and events that interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/")
![Good for Health, Bad for Education [Maker Update] | Maker.io](https://i.ytimg.com/vi/Y7u_cg3uhTs/hqdefault.jpg "Good for Health, Bad for Education [Maker Update] | Maker.io
This week on Maker Update: a bike that’s too much for a kid like you, a machine that spills the beans, upside down printing, and cracking the code on numbers stations.
+Show Notes [Maker Update Ep.375]+
=Project of the Week=
Kanedas Motorcycle by Ota Kobo 0:26
https://youtu.be/9DCc9yLkY08
=More Projects=
Wall Mounted Sound Sculpture by Eirik Brandal 2:31
https://www.youtube.com/watch?v=R9ZAp6HtYOs
Ultimate Cooking Robot by Gregulations 3:29
https://www.youtube.com/watch?v=LMoHLUd81P8
Number Mumble by Audio Wanderer 4:31
https://github.com/AUDIOWANDERER/NumberMumble
Arcade Costume by Ariknorr 5:16
https://www.instructables.com/Instructable-Arcade-Costume/
=Tips & Tools=
3D Print Any Texture by 3D Jake 5:51
https://www.youtube.com/watch?v=MezOnZN1x18
Whats Possible With Digital Sculpting by Punished Props 6:22
https://www.youtube.com/watch?v=2DTYW16BbSw
Single Point Incremental Forming by Russell Makes 6:56
https://www.youtube.com/watch?v=nM47ukoKTiQ
Upside Down Printing by 247 Printing 7:28
https://www.youtube.com/watch?v=n4nIM60UUZc
=DigiKey Spotlight=
AI Vision Modules by Becky Stern 8:01
https://www.youtube.com/watch?v=UXiLq1Igxxg
#makerupdate
Maker Update is a weekly video series covering news, projects, tips, and events that interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/")
![Any Color You Like [Maker Update] | Maker.io](https://i.ytimg.com/vi/YKL7zjbK74o/hqdefault.jpg "Any Color You Like [Maker Update] | Maker.io
This week on Maker Update: a new take on stage lighting, a remote controlled smoke grenade, homebrew sofubi, and I want my cat TV.
+Show Notes [Maker Update Ep.373]+
=Project of the Week=
Ultimate Open Source Lighting Rig by Super Valid Designs 0:30
https://www.youtube.com/watch?v=WX8RWSwZnng
=More Projects=
Mini TV for Cats by Becky Stern 2:47
https://www.digikey.com/en/maker/projects/cat-tv-with-raspberry-pi/8636bc60be2943a0867ee958337d1832
Drivable Grenade by Backhaul Studios 3:45
https://www.youtube.com/watch?v=k61Xcp0y554
Camera Drone vs F1 Car by Red Bull 4:32
https://www.youtube.com/watch?v=9pEqyr_uT-k
Mechanical 7-Segment Display Clock by Karakuri 5:11
https://www.youtube.com/watch?v=TmxXhfyIY5g
=Tips & Tools=
Upgrading a Cheap Microscope by BirdBrain Engineer 5:46
https://github.com/BirdbrainEngineer/microscope-upgrade
Moving Shop in 2 Days by Xyla Foxlin 6:28
https://www.youtube.com/watch?v=xqqTJdNGSL4
3d Printing for Filmmakers by Carls Cinema 7:06
https://www.youtube.com/watch?v=ALl0Nmne900
DIY Sofubi by the Crafsman 7:45
https://www.youtube.com/watch?v=LCFzbhYcmPM
=DigiKey Spotlight=
Google Coral Dev Board Intro by Shawn Hymel 8:16
https://www.youtube.com/watch?v=4KzWIJYnHW0
#makerupdate
Maker Update is a weekly video series covering news, projects, tips, and events that interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/")
