Uploaded September 2026 | Updated November 2026, 2 days ago
Altium Develop takes your drone board from schematic to fabricated PCB with component availability, alternates, and early manufacturer feedback built into the project: altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=one-minute-pcb-design-reviews&utm_content=one-150-ma-regulator-runs-this-drone-pcb
In this drone PCB design review, Tech Consultant Zach Peterson takes one minute to look over a community-submitted toy drone controller built around an STM32. Zach points out that every power domain is tied to a single VDD rail fed by a 150 mA regulator, which leaves very little current for the motors. He recommends swapping the USB Micro-B connector for USB-C, and flags a footprint outline under the STM32 that he first mistook for a through-hole component, on a package that has no die-attach pad.
Zach also explains why thermal reliefs on vias add no value, and shows a pin where the thermal is applied to the small piece of copper instead of the large ground pour. The full review linked below covers every improvement, making this a quick checklist for anyone designing a flight controller, motor driver, or battery-powered STM32 board.
βΆ Watch the deeper dive: youtu.be/c2uHuAmFq54
π‘ Watch Next:
β’ Full Toy Drone Controller Design Review: youtu.be/MYtr7wjR2iA
β’ Shrink This Drone PCB to 6 Layers | 1 Min PCB Design Review: youtube.com/shorts/3I729yJfMs8
β’ Add Thermal Vias to This Drone ESC | 1 Min PCB Design Review: youtube.com/shorts/5HHXSIakEhI
β’ When to Apply Thermal Relief Pads to Your PCB: youtube.com/watch?v=td1v-rW8U3I
β’ Microcontroller-Based Hardware Design With Altium Designer - #3 USB C: youtube.com/watch?v=t67KcQHhIC4
πΉ Connect with Zach:
Want your design reviewed by Zach? Reach out to him on LinkedIn with your design and production files for a chance to be featured on our channel: linkedin.com/in/zachariah-peterson
π‘ Stay Connected:
Don't forget to like, comment, and subscribe for more in-depth tutorials and tips from @AltiumAcademy Share your thoughts and questions in the comments below!
π Subscribe for more: youtube.com/@AltiumAcademy?sub_confirmation=1
Don't forget to follow us on social to stay up-to-date on the latest Altium Academy content.
π Follow Altium on TikTok: tiktok.com/@altiumdesigner
π Follow Altium on Twitter: twitter.com/altium
π Follow Altium on Linkedin: linkedin.com/company/altium
π Follow Altium on Facebook: facebook.com/AltiumOfficial
The Altium Academy is an online experience created to bring modern education to PCB Designers and Engineers all across the world. Here you can access a vast library of free training and educational content covering everything from basic design to advanced principles and step-by-step walkthroughs. Join industry legends as they share their career knowledge, review real-life design projects, or learn how to leverage one of Altium's leading design tools. No matter your level of experience, the Altium Academy can help you become a better Designer and Engineer!
About Altium LLC
Altium LLC (ASX:ALU), a global software company based in San Diego, California, is accelerating the pace of innovation through electronics. From individual inventors to multinational corporations, more PCB designers and engineers choose Altium software to design and realize electronics-based products.
#altium #pcbdesign #drone
Altium Develop takes your drone board from schematic to fabricated PCB with component availability, alternates, and early manufacturer feedback built into the project: altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=one-minute-pcb-design-reviews&utm_content=one-150-ma-regulator-runs-this-drone-pcb
In this drone PCB design review, Tech Consultant Zach Peterson takes one minute to look over a community-submitted toy drone controller built around an STM32. Zach points out that every power domain is tied to a single VDD rail fed by a 150 mA regulator, which leaves very little current for the motors. He recommends swapping the USB Micro-B connector for USB-C, and flags a footprint outline under the STM32 that he first mistook for a through-hole component, on a package that has no die-attach pad.
Zach also explains why thermal reliefs on vias add no value, and shows a pin where the thermal is applied to the small piece of copper instead of the large ground pour. The full review linked below covers every improvement, making this a quick checklist for anyone designing a flight controller, motor driver, or battery-powered STM32 board.
βΆ Watch the deeper dive: youtu.be/c2uHuAmFq54
π‘ Watch Next:
β’ Full Toy Drone Controller Design Review: youtu.be/MYtr7wjR2iA
β’ Shrink This Drone PCB to 6 Layers | 1 Min PCB Design Review: youtube.com/shorts/3I729yJfMs8
β’ Add Thermal Vias to This Drone ESC | 1 Min PCB Design Review: youtube.com/shorts/5HHXSIakEhI
β’ When to Apply Thermal Relief Pads to Your PCB: youtube.com/watch?v=td1v-rW8U3I
β’ Microcontroller-Based Hardware Design With Altium Designer - #3 USB C: youtube.com/watch?v=t67KcQHhIC4
πΉ Connect with Zach:
Want your design reviewed by Zach? Reach out to him on LinkedIn with your design and production files for a chance to be featured on our channel: linkedin.com/in/zachariah-peterson
π‘ Stay Connected:
Don't forget to like, comment, and subscribe for more in-depth tutorials and tips from @AltiumAcademy Share your thoughts and questions in the comments below!
π Subscribe for more: youtube.com/@AltiumAcademy?sub_confirmation=1
Don't forget to follow us on social to stay up-to-date on the latest Altium Academy content.
π Follow Altium on TikTok: tiktok.com/@altiumdesigner
π Follow Altium on Twitter: twitter.com/altium
π Follow Altium on Linkedin: linkedin.com/company/altium
π Follow Altium on Facebook: facebook.com/AltiumOfficial
The Altium Academy is an online experience created to bring modern education to PCB Designers and Engineers all across the world. Here you can access a vast library of free training and educational content covering everything from basic design to advanced principles and step-by-step walkthroughs. Join industry legends as they share their career knowledge, review real-life design projects, or learn how to leverage one of Altium's leading design tools. No matter your level of experience, the Altium Academy can help you become a better Designer and Engineer!
About Altium LLC
Altium LLC (ASX:ALU), a global software company based in San Diego, California, is accelerating the pace of innovation through electronics. From individual inventors to multinational corporations, more PCB designers and engineers choose Altium software to design and realize electronics-based products.
#altium #pcbdesign #drone










