Woodshop Junkies | Old garage doors turned into an reclaimed wood farm-style dining table DIY built by amateurs @WoodshopJunkies | Uploaded September 2017 | Updated October 2024, 3 days ago.
Stefan and I build our first dining table with a laminated top using wood salvaged from old doors.
Despite hitting a few snags the project didn't turn out all that bad.
Let us know what you think and what we could have done better in the comments below.
Table plans: woodworkjunkie.com/making-a-solid-hardwood-farm-style-table-free-plans
IMPORTANT - Disclaimer!
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of
working are correct.
Therefore you should always use your equipment and power tools as instructed by the owners manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.
Stefan and I build our first dining table with a laminated top using wood salvaged from old doors.
Despite hitting a few snags the project didn't turn out all that bad.
Let us know what you think and what we could have done better in the comments below.
Table plans: woodworkjunkie.com/making-a-solid-hardwood-farm-style-table-free-plans
IMPORTANT - Disclaimer!
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of
working are correct.
Therefore you should always use your equipment and power tools as instructed by the owners manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.