Uploaded December 2024 | Updated November 2026, 1 day ago
Running Black Diesel(cleaned motor oil) in trucks, heaters etc is much more reliable with an oil centrifuge. It cleans better than any amount of filtering.
Stuff I used in the video:
Roloc BRISTLE discs: amzn.to/3BmqK9z
Milwaukee Right Angle Grinder m12:
Phone Thermal Camera: amzn.to/3ZALxjg IOS amzn.to/4if5jbf
REAL oil centrifuge: amzn.to/3VkyAaO
After Thoughts about the Video: This really isn't meant to be a production setup. I just want to use the oil I pull from mine and neighbors vehicles. With the 11/64 hole it will process at 1 gallon per hour and use 3cents of electricity. This would speed up with heated oil/ more viscous. The reduced reserve capacity wouldn't hurt the performance but it will need to be cleaned of debris more often. This consists of wiping down the side walls with a towel. Depending on the oil this could be every 50 or 500 gallons. It holds around 1/2 a quart at a time now. I looked at quite a few juicers and this one was the only one that seamed to fit the bill. They do sell new centrifugal juicers on Amazon for under $50 amzn.to/41hv5FQ but none seamed adequate. Hard to tell from the photos. You want a large diameter hopper and high rpm. This produces 1300g's(3.5" radius 3600rpm) I human can only endure around 6g's
SUPPORT THE CHANNEL or support the SHOP DOG's treat addiction:
Buy Ginger a new bone: paypal.com/donate/?hosted_button_id=NS699E56WTYHL
instagram.com/sixtyfiveford
facebook.com/sixtyfiveford
Ginger Birthday wish list amazon.com/registries/birthday/1JJFHIQRBY14H/guest-view
65 Ford 65Ford SFF
Running Black Diesel(cleaned motor oil) in trucks, heaters etc is much more reliable with an oil centrifuge. It cleans better than any amount of filtering.
Stuff I used in the video:
Roloc BRISTLE discs: amzn.to/3BmqK9z
Milwaukee Right Angle Grinder m12:
Phone Thermal Camera: amzn.to/3ZALxjg IOS amzn.to/4if5jbf
REAL oil centrifuge: amzn.to/3VkyAaO
After Thoughts about the Video: This really isn't meant to be a production setup. I just want to use the oil I pull from mine and neighbors vehicles. With the 11/64 hole it will process at 1 gallon per hour and use 3cents of electricity. This would speed up with heated oil/ more viscous. The reduced reserve capacity wouldn't hurt the performance but it will need to be cleaned of debris more often. This consists of wiping down the side walls with a towel. Depending on the oil this could be every 50 or 500 gallons. It holds around 1/2 a quart at a time now. I looked at quite a few juicers and this one was the only one that seamed to fit the bill. They do sell new centrifugal juicers on Amazon for under $50 amzn.to/41hv5FQ but none seamed adequate. Hard to tell from the photos. You want a large diameter hopper and high rpm. This produces 1300g's(3.5" radius 3600rpm) I human can only endure around 6g's
SUPPORT THE CHANNEL or support the SHOP DOG's treat addiction:
Buy Ginger a new bone: paypal.com/donate/?hosted_button_id=NS699E56WTYHL
instagram.com/sixtyfiveford
facebook.com/sixtyfiveford
Ginger Birthday wish list amazon.com/registries/birthday/1JJFHIQRBY14H/guest-view
65 Ford 65Ford SFF










