HardTimes WoodworksIn this video, I show you how I designed and built an electric cocktail smoker from scratch!
I’ll walk you through the entire process, from designing the smoker in Fusion 360 to machining the parts on a CNC router, assembling the electronics, and putting everything together into a finished cocktail smoker.
I’ve also included the complete parts list below so you can build your own.
🔧 What’s in the build? Fusion 360 design and modeling CNC routing and machining the smoker body Wiring and assembling the electronics Installing the blower fan and controls Adding the smoker mesh and vent Final assembly A look at how the finished smoker works
The goal was to create a compact, rechargeable electric smoker that can add real smoke to cocktails without needing a complicated setup.
If you're into DIY projects, CNC machining, Fusion 360, woodworking, electronics, or craft cocktails, this project combines a little bit of everything.
If you build one yourself, I'd love to see it!
Don't forget to like, subscribe, and leave a comment if you have questions about the build or want to see more projects like this.
00:00 Cocktail Smoker in Action 00:33 Design of the Smoker in Fusion 360 01:17 CNC Routing the Smoker 01:38 Hand Routing and Finishing 02:08 Electronics & Wiring 02:43 Rear Cover 03:08 Fan and Button Demonstration 03:16 Installing Vent Cover and Smoker Mesh 03:25 Needed Parts
How to Build an Electric Whiskey Smoker (Parts List Included)HardTimes Woodworks2026-09-09 | In this video, I show you how I designed and built an electric cocktail smoker from scratch!
I’ll walk you through the entire process, from designing the smoker in Fusion 360 to machining the parts on a CNC router, assembling the electronics, and putting everything together into a finished cocktail smoker.
I’ve also included the complete parts list below so you can build your own.
🔧 What’s in the build? Fusion 360 design and modeling CNC routing and machining the smoker body Wiring and assembling the electronics Installing the blower fan and controls Adding the smoker mesh and vent Final assembly A look at how the finished smoker works
The goal was to create a compact, rechargeable electric smoker that can add real smoke to cocktails without needing a complicated setup.
If you're into DIY projects, CNC machining, Fusion 360, woodworking, electronics, or craft cocktails, this project combines a little bit of everything.
If you build one yourself, I'd love to see it!
Don't forget to like, subscribe, and leave a comment if you have questions about the build or want to see more projects like this.
00:00 Cocktail Smoker in Action 00:33 Design of the Smoker in Fusion 360 01:17 CNC Routing the Smoker 01:38 Hand Routing and Finishing 02:08 Electronics & Wiring 02:43 Rear Cover 03:08 Fan and Button Demonstration 03:16 Installing Vent Cover and Smoker Mesh 03:25 Needed PartsHow to Program a CNC Whiskey Smoker in VCarve Using My SVG FilesHardTimes Woodworks2026-10-13 | In this step-by-step CNC tutorial, I’ll show you how to program my battery-powered whiskey smoker board using VCarve 11.5 and the SVG vector files available in my Etsy shop.
If you purchased my whiskey smoker plans and vector files but are using an older version of VCarve, this tutorial will walk you through the programming process from start to finish. It’s also a great introduction to importing SVG files, setting up your material, and creating CNC toolpaths in VCarve.
WHAT YOU’LL LEARN
* How to create a new project in VCarve 11.5 * How to set your material and stock dimensions * How to import the whiskey smoker SVG vector files * How to identify the cutting depth from each SVG file name * How to select the pocket toolpath strategy * How to create individual toolpaths for different cutting depths * How to work from shallow pockets to deeper cuts and through-cuts
I’ll walk through the process of creating the toolpaths for the different SVG files so you can prepare the whiskey smoker components for CNC machining.
Whether you’re following along with my whiskey smoker plans or learning more about VCarve and CNC woodworking, I hope this tutorial helps you get more comfortable with your CNC workflow.
Here at Hardtimes Woodworks, I share woodworking projects, CNC builds, design tutorials, tool reviews, and tips for making useful and unique things in the shop.
If you enjoy CNC woodworking and DIY projects, consider subscribing and following along with the next build!
#CNCWoodworking #VCarve #WhiskeySmokerCharging Your Whiskey Smoker with USB-C! (Parts List Included) Watch Before Your Next Build!HardTimes Woodworks2026-09-29 | Are you building a whiskey smoker? Before you do, check out this video! Would you rather charge your whiskey smoker with USB-C? In this video I'll explain the parts you need!
🧰 Parts List 5v Battery - https://link.amazon/B00t73Hqs Alternative 5v Battery - https://link.amazon/B08uXwe4E USB-C Charge Port - https://link.amazon/B00VBPpek USB-C to DC Cable - https://link.amazon/B0dZlf5Ez 5v Fan - https://link.amazon/B01Gkp8Hw
Don't forget to like, subscribe, and leave a comment if you have questions about the build or want to see more projects like this.
#CocktailSmoker #WhiskeySmoker #DIY #CNC #Fusion360 #Woodworking #Electronics #Cocktails #Maker #DIYProjects #cncprojectsWhiskey Smoker Battery Charging Port - A Must Have For Your BuildHardTimes Woodworks2026-09-28 | In this video I go over installing the external charge port for a 12v battery powered whiskey smoker. Instead of taking the bottom cover on and off to change or charge batteries, this is a really good addition.
Don't forget to like, subscribe, and leave a comment if you have questions about the build or want to see more projects like this.
#CocktailSmoker #WhiskeySmoker #DIY #CNC #Fusion360 #Woodworking #Electronics #Cocktails #Maker #DIYProjects #cncprojectsElectric Whiskey Smoker the BIG Question, How Does The Smoke Get In The DomeHardTimes Woodworks2026-09-23 | This is just a quick run don on how the these whiskey smokers smoke runs through from the mesh screen to the dome. Hope this helps anyone confused by the previous YouTube videos.Whiskey Smoker Build with Basic Shop Tools! (Parts List Included)HardTimes Woodworks2026-09-21 | In this video, I show you how built an electric whiskey smoker from scratch with basic shop tools.
I’ll walk you through the entire process, from design and layout of the smoker to routing out pockets by hand using pattern bits.
I’ve also included the complete parts list below so you can build your own.
🔧 What’s in the build? Layout and Design Tools used and why Drilling pockets to depth Hogging out material with trim routers. Final assembly A look at how the finished smoker works
🧰 Parts List Battery Pack - amzn.to/46KNBYv Blower Fan - https://link.amazon/B00NwsvW9 Momentary Push Button - amzn.to/4ymyPD6 Electric Connectors - amzn.to/4xM2dmw Battery Charger Port - amzn.to/4x9WnKp Smoker Mesh Screen - amzn.to/3UHYKGX Stainless Steel Fan Vent - amzn.to/4xdp49c Glass Dome - amzn.to/3STrz2o Cutting Board Feet - amzn.to/4A4dXCh Pattern Router Bit Set - https://link.amazon/B07B3bl7W Dewalt Trim Router - https://link.amazon/B0eVTSXPS Forstner Bit Set - https://link.amazon/B0ehqae1R
The goal was to create a compact, rechargeable electric smoker that can add real smoke to cocktails without needing a complicated setup.
If you're into DIY projects, woodworking, electronics, or craft cocktails, this project combines a little bit of everything.
If you build one yourself, I'd love to see it!
Don't forget to like, subscribe, and leave a comment if you have questions about the build or want to see more projects like this.
00:00 Layout and Design 1:28 Using Drill Press 2:06 Routing Smoke Channel 2:43 Hogging Out Material with Trim Router 3:10 Tools Used 3:50 Layout 4:10 Trim Router Work 7:57 Bottom Cover 8:53 Assembly and Final TestWhiskey SmokerHardTimes Woodworks2026-09-09 | DIY Whiskey Smoker. Build and parts list on my channel. youtu.be/OHNgQMnr1uk #bourbon #whiskey #whiskeysmoker #cocktails #woodwork #diyHoney Bee Swarm Trap BuildHardTimes Woodworks2026-06-10 | Building a simple DIY Honey Bee Swarm Trap from scrap plywood! 🐝✨
In this woodworking project, I show you how to build an effective swarm trap using leftover plywood I had in the shop. Perfect for beekeepers looking to catch a free swarm and expand their apiary without spending much money.
Watch as I break down the process step-by-step: -Cutting all the pieces accurately on the table saw -Assembling with glue and brad nails -Final finishing touches
This is a beginner-friendly build that any woodworker or beekeeper can tackle in an afternoon. Swarm traps are one of the best (and cheapest) ways to get more bees!
If you're into woodworking, beekeeping, or designing and building things, hit that LIKE button and subscribe for more shop projects.
🛠️Tools & Materials Used: -Table saw, but you could use a circular saw. -Plywood scraps (the plans are for 3/4" and 1/2" plywood because that's what I had available) -Wood glue -Brad nail gun and brad nails -1 inch drill bit -Bee trap door
Timestamps 0:00 - Cutting plywood to size on the table saw 0:39 - Cutting rabbet on sides 0:48 - Assembling the trap box 2:32 - Cut 1/2 inch thick strips for the lid 3:01 - Assembling the lid 3:48 - Adding the entry door 4:01 - Filling the trap with frames 4:18 - Final Product
👍Drop a comment and let me know: Have you ever caught a swarm? What size trap do you use? Do you have any questions about the build? Do you want a video over designing a swarm trap in Fusion 360?
📐Dimensions: Front and Back - .75 x 18 x 19.875 Sides - .75 x 18 x 7.5 Bottom - .5 x 7.5 x 18.375 Top - .75 x 10 x 20.875 Top sides (front and back) - .5 x 20.875 x 1.5 Top sides (sides) - .5 x 9 x 1.5
🗒️Notes: - I cut rabbets on both ends of the side pieces. .375 x .5 One to hold the frames and the other side for the bottom - I attached the trap to a tree using a ratchet strap, but a piece can be added on the backside to use a hook to hold the trap. - This trap will hold standard brood box frames
#BeeSwarmTrap #DIYBeekeeping #Woodworking #SwarmTrap #Beekeeping #Homestead #Scrapwoodprojects #Woodshop #HoneyBeesDIY’d Wood Flooring For Loft #woodworking #barndominium #diyHardTimes Woodworks2026-01-23 | Milled a ton of lumber for some wood flooring. This wood was sourced from the trees taken down to build the barndominium they were installed in. Fun project. All done with router tables and a sled.Overnight Sensations Bookshelf Speaker Build #speakers #highendaudio #audiophile #bookshelfspeakersHardTimes Woodworks2026-01-11 | The process of building some custom bookshelf speakers. They included cnc cut baffles designed by me.Overnight Sensations Full Custom Speaker Build | CNC Machined Front BaffleHardTimes Woodworks2026-01-10 | In this video, I build a set of custom bookshelf speakers from scratch in my woodshop. From designing the speaker baffles in Fusion 360 to CNC machining the parts, soldering the electronics, and final assembly, this is a complete start-to-finish speaker build.
I walk through my design process, show how I designed and cut the baffles on my CNC machine, and explain how I wired and soldered all of the components for clean, reliable sound. These DIY speakers combine precision woodworking with audio engineering, making them perfect for anyone interested in CNC projects, custom speakers, or advanced shop builds.
Whether you’re a woodworker, maker, DIY audio enthusiast, or just curious about how custom speakers are built, this video covers tools, techniques, and tips you can apply to your own projects. I also share lessons learned along the way and what I’d change on future builds.
If you enjoy CNC woodworking, speaker builds, Fusion 360 design, or shop projects like this, consider subscribing for more custom builds and tutorials.
If you have any questions or suggestions on future videos, comment!
Thank you so much for watching!
-MichaelCustom Bubinga Snare Drum BuildHardTimes Woodworks2026-01-08 | Here’s some clips of my custom snare drum build. I made it from a solid piece of Bubinga. There’s a few build steps I missed filming. Went with a 13x7 snare with gold hardware all around.Speaker box progress. Building some overnight sensations bookshelf speakers.HardTimes Woodworks2022-10-10 | ...How they do it? Plumbus’s! Batching out some wood Overnight Sensations Speaker Baffles on the CNC.HardTimes Woodworks2022-10-08 | ...Creating Polymetric Shapes in Autodesk Fusion 360HardTimes Woodworks2018-10-18 | In this video I'll show you how to model a polymetric face using Fusion 360. This is a quick and easy method that I've used on a couple projects. This is my first tutorial video so bare with me.
If you enjoy CNC woodworking, speaker builds, Fusion 360 design, or shop projects like this, consider subscribing for more custom builds and tutorials.