Ohio Scientific Superboard II with Votrax Type N Talk @RoyAntaw
Ohio Scientific Superboard II with Votrax Type N Talk  @RoyAntaw
Uploaded December 2022 | Updated November 2026, 3 hours ago
Ohio Scientific Superboard II with Votrax Type 'N Talk
A quick test using the my Superboard II computer's RS232 port to send data to a Votrax speech synthesiser.

The Votrax pins 5-8-20 tied together, Pin 3 RS232 data from Superboard II and pin 7 to GND. Then poking F001 Hex ACIA Serial port, poke 64511,char for each character and with poke 64511,13 for the end of line. I have no hardware flow control so then I'm just putting a small delay after sending each character. This is not 100% reliable but I'm going to continue to experiment with this setup.
Ohio Scientific Superboard II with Votrax Type N TalkLinear Addressing on the Amstrad PC 512 CGA - unfortunately, the answer is No.An introduction to my TI-99/4A 16bit Computer from 1981Get online with Solaris 7 x86 (SUN OS 5.7) in 2023TI-99/4A FinalGROM99, Speech Synth, 32KB Side cart Running Mega DEMODigital  (DEC) AlphaStation 255/233Mz VMS 6.2 AXP InstallC64 plans for the futureEaster SundayBASIC KSR 43 teleprinter. My first power up.Kung Fu Flash  Transferring data to pi1541 drive using EF3USB toolTI-99/4A My NTSC 5 pin dodgy Video and Audio solutionOhio Scientific Inc. OSI Superboard II 600 Rev B and  C1P 4-bit DAC Sound
Roy Edmund Antaw |

Ohio Scientific Superboard II with Votrax Type 'N Talk

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER