Uploaded April 2020 | Updated November 2026, 13 hours ago
The first half of this video is content that never made the cut to YouTube...This is why the "6 months later" part comes in.
Remember to join the Discord Server! discord.gg/wZBXf4B
You can buy the PV combiner box through this Amazon Affiliate link:
amzn.to/2T90EO5
In this video I show off the ground mount solar array that I had built a handfull of months ago. I would say that this is performing very well. I have 28 panels mounted in this fashion with 16 facing west and 12 facing East. The nice part is that the panels on the opposite side block the wind from either direction, so even though these are not permanenetly attached to the ground, they are still safe guarded from wind.
I have all 28 of these panels tied to an Outback FM80 Charge controller. Even though the nameplate capacity of the panels exceeds what the charge controller would accept, its acceptable because the charge controller limits the current to keep it within its own spec. Also consider the fact that both arrays will rarely be facing the sun at the same time, except for at noon, but at noon the panels would be at an "off-angle" so the effeciency would not be the best. All this means is that I save having a charge controller going half of the day without being used because the panels are not facing the sun.
I built these racks out of wood because they will be temporary until we get a house/shop built and can built a permanent ground mount rack. Typically you would see solar racks built out of steel or aluminum and this type of setup would not pass an inspection for permits. Since these racks are portable they are considered personal property and do not require a permit...This means we can have power completely off the grid until we get everything setup more permanently.
One of the problems with solar trackers is there are many moving parts and you have a massive amount of stuff to move around. These 20 panels would all need to stay facing the same direction due to the fact that they are wired together on one charge controller.
I used to have 2 solar tracker racks on top of the shipping container. I just recently retired these trackers due to the fact that they have been a headache nightmare. With my parents being on the ranch and me living out of the state it makes it really difficult to have a system with all these moving parts that requires all this maintenance.
One feature I did not mention in the past is that these racks can easily be lifted up with one person and tilted on their back so that the panels are facing 55 degrees east to better catch morning sun. Obviously this would require a person to take care of that but we now have so much generation capacity that the need for a tracker to increase efficiency is no longer desirable because the maintnence outweighs the increase in production.
FTC Disclosure Statement:
Some links on this YouTube channel may be affiliate links. We may get paid if you buy something or take an action after clicking one of these.
HighTechLab is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
The first half of this video is content that never made the cut to YouTube...This is why the "6 months later" part comes in.
Remember to join the Discord Server! discord.gg/wZBXf4B
You can buy the PV combiner box through this Amazon Affiliate link:
amzn.to/2T90EO5
In this video I show off the ground mount solar array that I had built a handfull of months ago. I would say that this is performing very well. I have 28 panels mounted in this fashion with 16 facing west and 12 facing East. The nice part is that the panels on the opposite side block the wind from either direction, so even though these are not permanenetly attached to the ground, they are still safe guarded from wind.
I have all 28 of these panels tied to an Outback FM80 Charge controller. Even though the nameplate capacity of the panels exceeds what the charge controller would accept, its acceptable because the charge controller limits the current to keep it within its own spec. Also consider the fact that both arrays will rarely be facing the sun at the same time, except for at noon, but at noon the panels would be at an "off-angle" so the effeciency would not be the best. All this means is that I save having a charge controller going half of the day without being used because the panels are not facing the sun.
I built these racks out of wood because they will be temporary until we get a house/shop built and can built a permanent ground mount rack. Typically you would see solar racks built out of steel or aluminum and this type of setup would not pass an inspection for permits. Since these racks are portable they are considered personal property and do not require a permit...This means we can have power completely off the grid until we get everything setup more permanently.
One of the problems with solar trackers is there are many moving parts and you have a massive amount of stuff to move around. These 20 panels would all need to stay facing the same direction due to the fact that they are wired together on one charge controller.
I used to have 2 solar tracker racks on top of the shipping container. I just recently retired these trackers due to the fact that they have been a headache nightmare. With my parents being on the ranch and me living out of the state it makes it really difficult to have a system with all these moving parts that requires all this maintenance.
One feature I did not mention in the past is that these racks can easily be lifted up with one person and tilted on their back so that the panels are facing 55 degrees east to better catch morning sun. Obviously this would require a person to take care of that but we now have so much generation capacity that the need for a tracker to increase efficiency is no longer desirable because the maintnence outweighs the increase in production.
FTC Disclosure Statement:
Some links on this YouTube channel may be affiliate links. We may get paid if you buy something or take an action after clicking one of these.
HighTechLab is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com










