Uploaded June 2020 | Updated November 2026, 3 days ago
In this video, I thoroughly capacity test four new genuine CALB 180 cells. I used a .25 Ohm water heating element in order to avoid any interferance that may have been caused by the inverter.
If you are interested in the purchase of any new CA180 cells, visit store.currentconnected.com.
The final result of the capacity test was 192 amp hours to the 2.5 volt reading, but I have reason to believe that the batteries were slightly out of balance by the time I concluded the test. In a future video I plan to record a capacity test with an active cell balancer installed.
If you had any questions, feel free to comment below or send me an email at the address listed above.
Join the HighTechLab Discord Server! discord.gg/wZBXf4B
In this video, I thoroughly capacity test four new genuine CALB 180 cells. I used a .25 Ohm water heating element in order to avoid any interferance that may have been caused by the inverter.
If you are interested in the purchase of any new CA180 cells, visit store.currentconnected.com.
The final result of the capacity test was 192 amp hours to the 2.5 volt reading, but I have reason to believe that the batteries were slightly out of balance by the time I concluded the test. In a future video I plan to record a capacity test with an active cell balancer installed.
If you had any questions, feel free to comment below or send me an email at the address listed above.
Join the HighTechLab Discord Server! discord.gg/wZBXf4B










