Uploaded November 2018 | Updated September 2026, 1 hour ago
This “Case Type 3” is designed for the user who needs high bandwidth network with mid-range storages. Basically, this is the fanless design and the heated air from a processor or the storages can be blow out through the 92mm cooling fan holes on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan (optional) at the hole if the decent power for the fan is supplied.
Supported storages:
On-board eMMC 5.1 module
On-board M.2 NVMe (NGFF-2280)
Up to 2 x 2.5” SATA HDD or SSD (Max height : 15mm)
“SATA Data and Power Cable” must be purchased
The disk drive mounting screws (M3x6mm) are included in the package.
The power and reset switches are accessible through the hole at the front
Optional power on/off switch (diameter 16mm) can be installed at the front
hardkernel.com/shop/odroid-h2-case-3
Optional accessory
SATA Data and Power Cable
hardkernel.com/shop/sata-data-and-power-cable
LED Power Button
hardkernel.com/shop/led-power-button
16Port I2C GPIO Board
hardkernel.com/shop/16port-i2c-gpio-board
92x92x25mm DC 5V Cooling Fan
hardkernel.com/shop/92x92x25mm-dc-cooling-fan-w-pwm-speed-sensor-tacho
Mechanical drawings:
dn.odroid.com/temp/box/ODROID-H2_TYPE3.dxf
This “Case Type 3” is designed for the user who needs high bandwidth network with mid-range storages. Basically, this is the fanless design and the heated air from a processor or the storages can be blow out through the 92mm cooling fan holes on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan (optional) at the hole if the decent power for the fan is supplied.
Supported storages:
On-board eMMC 5.1 module
On-board M.2 NVMe (NGFF-2280)
Up to 2 x 2.5” SATA HDD or SSD (Max height : 15mm)
“SATA Data and Power Cable” must be purchased
The disk drive mounting screws (M3x6mm) are included in the package.
The power and reset switches are accessible through the hole at the front
Optional power on/off switch (diameter 16mm) can be installed at the front
hardkernel.com/shop/odroid-h2-case-3
Optional accessory
SATA Data and Power Cable
hardkernel.com/shop/sata-data-and-power-cable
LED Power Button
hardkernel.com/shop/led-power-button
16Port I2C GPIO Board
hardkernel.com/shop/16port-i2c-gpio-board
92x92x25mm DC 5V Cooling Fan
hardkernel.com/shop/92x92x25mm-dc-cooling-fan-w-pwm-speed-sensor-tacho
Mechanical drawings:
dn.odroid.com/temp/box/ODROID-H2_TYPE3.dxf
