Uploaded November 2018 | Updated September 2026, 10 hours ago
This “Case Type 2” is designed for the user who needs high performance network with a minimal or regular range storages. Basically, this is the fanless design and the heated air from a processor can be blow out through the 92mm cooling fan hole on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan (optional) at the hole if the decent power for the fan is supplied.
Supported storages:
On-board eMMC 5.1 module
On-board M.2 NVMe (NGFF-2280)
“SATA Data and Power Cable” must be purchased
The disk drive mounting screws (M3x6mm) are included in the package.
The power and reset switches are accessible through the hole at the front
Optional power on/off switch (diameter 16mm) can be installed at the front panel
128 (L) x 132 (W) x 63 (H) mm
hardkernel.com/shop/odroid-h2-case-type-2
This “Case Type 2” is designed for the user who needs high performance network with a minimal or regular range storages. Basically, this is the fanless design and the heated air from a processor can be blow out through the 92mm cooling fan hole on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan (optional) at the hole if the decent power for the fan is supplied.
Supported storages:
On-board eMMC 5.1 module
On-board M.2 NVMe (NGFF-2280)
“SATA Data and Power Cable” must be purchased
The disk drive mounting screws (M3x6mm) are included in the package.
The power and reset switches are accessible through the hole at the front
Optional power on/off switch (diameter 16mm) can be installed at the front panel
128 (L) x 132 (W) x 63 (H) mm
hardkernel.com/shop/odroid-h2-case-type-2
