Uploaded November 2018 | Updated September 2026, 14 hours ago
This “Case Type 1” is designed for the user who needs high bandwidth network with the high capacity storages for the high performance computing system. One 92mm standard PC cooling fan is applied to the side of the enclosure in order to blow out the heated air from the disk drives and the ODROID-H2.
Supported storages:
On-board eMMC 5.1 module
On-board M.2 NVMe (NGFF-2280)
Up to 2 x 3.5” SATA HDD (At least 1 drive must be mounted in order to securely hold the enclosure structure)
SATA Data & Power cables must be purchased
The disk drive mounting screws (#6-32x10mm) are included in the package.
The power and reset switches are accessible through the hole at the front
Optional LED Power Button (diameter: 16mm) can be installed at the front
Size : 118 (L) x 236 (W) x 132 (H) mm
hardkernel.com/shop/odroid-h2-case-1
This “Case Type 1” is designed for the user who needs high bandwidth network with the high capacity storages for the high performance computing system. One 92mm standard PC cooling fan is applied to the side of the enclosure in order to blow out the heated air from the disk drives and the ODROID-H2.
Supported storages:
On-board eMMC 5.1 module
On-board M.2 NVMe (NGFF-2280)
Up to 2 x 3.5” SATA HDD (At least 1 drive must be mounted in order to securely hold the enclosure structure)
SATA Data & Power cables must be purchased
The disk drive mounting screws (#6-32x10mm) are included in the package.
The power and reset switches are accessible through the hole at the front
Optional LED Power Button (diameter: 16mm) can be installed at the front
Size : 118 (L) x 236 (W) x 132 (H) mm
hardkernel.com/shop/odroid-h2-case-1
