CurryKitten | Ochin CM4 Board: A simpler solution for Open.HD and more? @CurryKitten | Uploaded 2 years ago | Updated 2 days ago
Open.HD is a really interesting project, but I find working with the Pi's a bit of a pain compared to a regular flight controller. Enter Flavio and his Open hardware project, the Ochin CM4 board - which allows you to put a Raspberry Pi CM4 board into a more regular flight controller "stack" Let's dive in and find out more about it.
New to Open.HD - check out my playlist here youtube.com/playlist?list=PL7WaECFssECJWfTc0vKYTfUdH5y8UgdI9
As mentioned, if you want to get yourself into the group buy, then make a comment on the GitHub issue here github.com/ochin-space/ochin-CM4/issues/2?fbclid=IwAR13JSmr_c5hBK6Blvp4JyRfXb0CF3itBH6st3bLkWC7VpF6pGK85jGj1Nk You can also email Flavio directly at perniciousflier@gmail.com and check out the Facebook page for the project at facebook.com/ochin.space The main page for the project can also be found here github.com/ochin-space/ochin-CM4
You can also check out Flavio's video of him installing the Ochin CM4 board in his EasyStar here youtube.com/watch?v=MhSGWJF--bU&ab_channel=FlavioAnsovini and its maiden flight on Open.HD here youtube.com/watch?v=Bz7UXAgBGvU&ab_channel=FlavioAnsovini
I'll be back with a follow-up video (once my wing is built and the FC gets here) that covers flashing the CM4 board and my own installation and maiden.
If you liked this video and want to show your support please feel free to join my Patreon supporters here patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me
Open.HD is a really interesting project, but I find working with the Pi's a bit of a pain compared to a regular flight controller. Enter Flavio and his Open hardware project, the Ochin CM4 board - which allows you to put a Raspberry Pi CM4 board into a more regular flight controller "stack" Let's dive in and find out more about it.
New to Open.HD - check out my playlist here youtube.com/playlist?list=PL7WaECFssECJWfTc0vKYTfUdH5y8UgdI9
As mentioned, if you want to get yourself into the group buy, then make a comment on the GitHub issue here github.com/ochin-space/ochin-CM4/issues/2?fbclid=IwAR13JSmr_c5hBK6Blvp4JyRfXb0CF3itBH6st3bLkWC7VpF6pGK85jGj1Nk You can also email Flavio directly at perniciousflier@gmail.com and check out the Facebook page for the project at facebook.com/ochin.space The main page for the project can also be found here github.com/ochin-space/ochin-CM4
You can also check out Flavio's video of him installing the Ochin CM4 board in his EasyStar here youtube.com/watch?v=MhSGWJF--bU&ab_channel=FlavioAnsovini and its maiden flight on Open.HD here youtube.com/watch?v=Bz7UXAgBGvU&ab_channel=FlavioAnsovini
I'll be back with a follow-up video (once my wing is built and the FC gets here) that covers flashing the CM4 board and my own installation and maiden.
If you liked this video and want to show your support please feel free to join my Patreon supporters here patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me
