Uploaded August 2018 | Updated November 2026, 2 hours ago
A friend asked for a Fallout themed box with Vault Boy carved on the lid. I used oak and Sapele to make a nice contrast on the lid and with splines on the corner of the box. This is a rather more complex woodworking project than I'm used to but it was a lot of fun and I'm glad I tried it.
The carving was achieved with a fairly small number of chisels that were pretty cheap, I tend to go onto eBay to find old and decent carving chisels and restore them to working order. The corners are rebates and then kept together with splines, I tend to do a pre glue up of the sides and then add the splines afterwards. I'm not sure if it's the best way but it tends to keep everything together.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
amzn.to/2p4A4Xq - Amazon US
A friend asked for a Fallout themed box with Vault Boy carved on the lid. I used oak and Sapele to make a nice contrast on the lid and with splines on the corner of the box. This is a rather more complex woodworking project than I'm used to but it was a lot of fun and I'm glad I tried it.
The carving was achieved with a fairly small number of chisels that were pretty cheap, I tend to go onto eBay to find old and decent carving chisels and restore them to working order. The corners are rebates and then kept together with splines, I tend to do a pre glue up of the sides and then add the splines afterwards. I'm not sure if it's the best way but it tends to keep everything together.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
amzn.to/2p4A4Xq - Amazon US




![How to make a Mitre Jig for a Shooting Board [Woodworking Jig] (Cut mitres)
I make a lot of boxes but have never been able to make one with mitre joints due to using hand tools only, various other jigs and methods havent worked. So I decided to try and make a mitre jig for my shooting board to solve my problem.
This is a pretty simple build which requires some accuracy to get it to work properly but will be worth it in the end. To be honest I have found it to work rather well but it is still far from giving me the perfect mitres which I desire.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
Etsy - https://www.etsy.com/uk/shop/TimberAnew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US How to make a Mitre Jig for a Shooting Board [Woodworking Jig] (Cut mitres)](https://i.ytimg.com/vi/q56HbTcFD5E/mqdefault.jpg)

![Gendrys War Hammer [Game of Thrones]
Wanting to push myself I decided to try and make a replica of Gendrys War Hammer from Game of Thrones. I built this hammer live entirely on Twitch and it includes lathe work, carving, dowel making and even some paper mache and painting. Its quite different from my usual projects but I like to branch out now and then.
The handle is made from what I think is teak and the bottom and top finial is made from ash as is the spike. The larger parts of the hammer are made from plywood laminated together and then turned and carved.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Gendrys War Hammer [Game of Thrones]](https://i.ytimg.com/vi/qRX6_PmZuL8/mqdefault.jpg)



