Home Built Air Compressor Intake Silencer JN Woodworks 2024-09-11 | In this video I show how to make a simple improvement to the noise your air compressor makes at the intake vent.Here is the orginal review video on this Quincy air compressor
I added a Laser Crosshair and a Dust Shoe Light to my AVID CNC. JN Woodworks 2024-10-05 | In this video I show a laser crosshair and a dust shoe light that I added to my AVID CNC.Here is a wiring diagram with parts list:drive.google.com/file/d/12ynbLIwxtJbFOT5fSTkp91sH5LXREfzy/view?usp=drive_linkVinyl sheet for sight window in brush:amazon.com/Deep-Dream-Protector-Rectangular-Computer/dp/B0C7482GWN/ref=sr_1_6?crid=2S2VFVHZGOCSL&dib=eyJ2IjoiMSJ9.le0kJKDKNQi_0g68XwTDbzUJS4QJfe-QlbaTwhtrI5BZSBDvIS2lUMhH_nuGVhUbLPlIciZjtoYLOsR_jd6-QnD0dW9KtnnXuvHlAFi-9PsW4wQYVHTA4dejoJu7Xqy7FtnoAU4NcXJp3xfLfTO0dKJ_rXfcmSYgN0CVUUD_iHmXKEFpS_-BCeAo5DhogyJxGrwEZkj7h0EOA2pYxRmk1NUkPpJbfiqbrpqdP7xK1oFaL-MyChGnweNLZKxyjWc7rVqYtMa1JPl4JWfl5XS7vhC7J4nRSpukbohnxUPWqB4.tJ0FKm-CEzLxDVc9pWqebIie1xdvrSgI25MqekoZA-E&dib_tag=se&keywords=premium%2Bclear%2Bvinyl%2Btable%2Bprotector%2B2mm&qid=1728111712&sprefix=2mm%2Bclear%2Bvinyl%2Caps%2C151&sr=8-6&th=1
Laser Cut Raised Letter Sign JN Woodworks 2024-09-26 | In this video I show how I built a wedding seating chart sign with my AVID CNC and Opt Lasers XT8 laser.You can find this laser here: optlasers.com/Plug-and-Play-Kits-for-All-CNC-Machines?opt=y2035
Simple and Accurate Blue Laser Edge/Corner Finder JN Woodworks 2024-09-25 | In this video I describe how to build and use a very simple but accurate corner/edge finder for a visible laser.
Two Sided Laser Cutting With my Opt Lasers XT8 and AVID CNC JN Woodworks 2024-08-02 | In this video I show how to align front side and backside cuts so that materials twice as thick can be cut with your laser.
How to Add a Normally Closed Touch Probe or Tool Setter to your AVID CNC JN Woodworks 2024-07-08 | In this video I describe how the AVID CNC touch plate works, and how to add normally closed 3D probes or tool setters to the machine.The documentation file I used in the video is stored here: drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=drive_link
Review of the new Opt Lasers LaserDock Pro JN Woodworks 2024-07-05 | The full kit can be found here:optlasers.com/performance-accessories/laserdock-pro-magnetic-laser-attachment-station-for-cnc-machines?opt=y2035The laser half only can be found here: optlasers.com/performance-accessories/laserdock-pro-laser-side-part-only?opt=y2035
Testing the Opt Lasers 45W PLH3d-X8s Cutting Abilities - Revisited JN Woodworks 2024-07-05 | This is a revised video followup on the original video from a few weeks ago. This laser is the production version, and I used an optimized focal depth for cutting. In this video I test the XT8 blue laser's ability to cut various organic materials.This laser can be found on Opt Lasers' website at: optlasers.com/Plug-and-Play-Kits-for-All-CNC-Machines?opt=y2035A video on how to find the optimum focal depth for cutting can be found here: youtu.be/WJmp82eRzIE
How to get the best focal point and speed for cutting with your laser JN Woodworks 2024-06-29 | In this video I show how to characterize your laser cut so you know the best speed and focal depth for your laser for the optimum cutting speed and quality.Link to Russ's video on this topic: youtube.com/watch?v=E7O2GvSG-Is&t=1408s
Using a Laser With the New Sketch Carve Toolpath in Vectric V12 JN Woodworks 2024-06-18 | The new Sketch Carving toolpath added to Vectrive Vcarve and Aspire Version 12 was meant to be use with a router. However, in this video I demonstrate how you can use a custom post processor to use a laser with this new toolpath.My Google drive where the Post Processors are stored: drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=drive_linkMy email if you have questions: jnwdwks@gmail.com Previous video on how to use this postprocessor to use a laser with the Profile and pocket toolpaths:youtu.be/DNGwsTZZ7iU
How to Use a Standard Router Toolpath in Vcarve to Generate a Laser Toolpath JN Woodworks 2024-06-17 | In this video I describe a few of the limitations of Vectric's laser toolpath for cutting and engraving, and how to use the profile and pocketing toolpaths instead.My Google drive where the Post Processors are stored: drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=drive_linkMy email if you have questions: jnwdwks@gmail.com My video on Laser Rastering with the ESS plugin: youtube.com/watch?v=79g7WSAuJUk&t=1063s
RapidChange ATC Testing #5 - Final Thoughts JN Woodworks 2024-05-20 | This is my 5th installment of testing videos of the new RapidChange ATC. It is the final review in the series. RapidChange Website: rapidchangeatc.comMariTool CNC Tooling: maritool.comInstructions for getting the M4 (reverse) working on an AVID and setting the low rpm limits: drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=drive_link
3D Engraving in Wood with Opt Lasers PLH3D-XT8 8 diode blue laser on an AVID CNC JN Woodworks 2024-05-14 | In this video I attempt to do a 3D engraving in wood converted from an STL file into a grayscale depth map. The 45W power and longer focal length lens of hte XT8 laser make this possible.You can get more info on the XT8 laser here: optlasers.com/Plug-and-Play-Kits-for-All-CNC-Machines?opt=y2035AVID CNC here: avidcnc.comSTL2PNG converter: fenrus75.github.io/FenrusCNCtools/javascript/stl2png.htmlImagR Laser Image procession software: imag-r.comYouTube videos on toothed belt "curtains" effect in laser engraving:youtube.com/watch?v=QFLq14vY2zQ&t=570syoutube.com/watch?v=B87ifTPKN8cYoutube Video on STL2PNG: youtube.com/watch?v=o0YZutT_POs&t=162sHow to remove the background in an image with paint.net:youtube.com/watch?v=KU7apLly4BA&t=84s
RapicChangeATC #4 testing update JN Woodworks 2024-05-05 | I have just finished my reliability testing of the RapidChange ATC and cover the results in this video.First three videos in this series:youtube.com/watch?v=ZsCqWb_9dwg&t=11syoutube.com/watch?v=xu1OjhRlqug&t=516syoutube.com/watch?v=VDYefe_ToP4&t=129s
Opt Lasers XT8 Deep Etching on Different Wood Species JN Woodworks 2024-04-24 | In this video I compare deep laser etching on several species of wood with my new Opt Laser XT8, as well as try a couple of methods to shorten the execution time of the engraving.More information on the Opt XT8 laser can be found here: optlasers.com/Plug-and-Play-Kits-for-All-CNC-Machines?opt=y2035
Laser Job Setup on my CNC JN Woodworks 2024-04-24 | This is a quick overview of the setup process I use for each laser job with my Opt lasers on my AVID Pro CNCMore information on the Opt XT8 laser can be found here: optlasers.comAnd for the AVID CNC: avidcnc.com
Review of the New AVID CNC Dust Shoe kit JN Woodworks 2024-04-08 | This is a first look at the new dust shoe from AVID CNC.
RapidChange ATC testing update #3 JN Woodworks 2024-04-02 | This is my third video on the RapidChange ATC I have installed on my AVID CNC. In this video I cover the internal parts that grip the collet nut, and how they are replaced, as well as their durability.
Preliminary Review of RapidChange ATC on my AVID CNC JN Woodworks 2024-03-08 | This is a preliminary review and summary of my first round of testing of the new RapidChange ATC on my AVID CNC.My first video showing some basic tool changes: youtube.com/watch?v=ZsCqWb_9dwg&t=1sYou can find more information on RapidChange here: rapidchangeatc.com
First look at the Opt Lasers PLH3D-XT8, 8 diode blue laser engraving head JN Woodworks 2024-03-05 | This a review of my initial impressions of the just released XT8 diode laser from Opt lasers after the first 4 hours of use. I will do a full review later after I have been able to test it on more materials.This laser can be found on Opt Lasers' website at: optlasers.com/Plug-and-Play-Kits-for-All-CNC-Machines?opt=y2035
First test of RapidChange ATC on my AVID CNC JN Woodworks 2024-02-28 | This is my first run of the RapidChange ATC system that has just recently come out. This is my first set of tool changes after dialing it in. This unit has 6 tool positions, a motorized lid, and IR detector to test presence of the spindle nut and if it is correctly threaded on. The macro also does an automatic toolsetter measurement on my AVID touchplate in its storage location. So far this looks pretty good. Now I will move on to some reliability testing. I will do a full review in the near future.
Review of AVID CNCs New Laser Kit JN Woodworks 2023-10-20 | In this video I review the hardware kit for the new laser setup featurign an Opt Lasers laser. This is a full plug and play kit (similar to their spindle or plasma cutter kits) with all the software, hardware (including 15W Opt Laser), and wiring to enable its use.AVID CNC laser kit link: avidcnc.com/avid-cnc-15w-diode-laser-system-p-1348.htmlAVID CNC First Cut Overview Videos:avidcnc.com/support/instructions/machineOperation/Laser/FirstCutOpt Lasers Website: optlasersgrav.comMy 15W Opt laser reviews:youtube.com/watch?v=23uJlaL0oJM&t=423syoutube.com/watch?v=wZC7dykxaKM&t=896s
Llambrich Precision Lathe/CNC Live Center Review JN Woodworks 2023-10-03 | In this video I review the Llambrich model R-200-RN small diameter live center.Llambrich USA Website: llambrichusa.comWhere to order: llambrichusa.com/distributorsPenn Tool has this live center on their site:penntoolco.com/shop/?search_query=LLAMBRICH+R-200-RNIf you can't find a distributor that caries one of the Llambric catalog items, you can contact the importer, QTI Imports and they will help you: qtimports.comSales@qtimports.com(220) 666-0911Quality Tool ImportsSuite C601 Pittsburgh Ave.Mount Vernon OH 43050
Resurfacing an Aluminum Cylinder Head with My AVID CNC and a Slab Slayer Bit JN Woodworks 2023-09-22 | In this video I mill down an aluminum cylinder head that is badly warped with my AVID CNC Router and a Slab Slayer surfacing bit.Link to Slab Slayer Bit Info: ripprecisiontools.com/product-page/2-5-surfacing-bit-slab-slayer-1-2-shank
Super Smooth Precision Llambrich Keyless Drill Chuck 2 Year Follow Up Review JN Woodworks 2023-09-08 | This is a 2 year followup video review of a keyless Llambrich chuck that I put on my drill press. It continues to work perfectly and be one of my favorite tool purchases in the last few years.Original Drillpress Video: youtube.com/watch?v=ovv-n_l1Gfg&t=42sLlambrich USA Website: llambrichusa.comWhere to order: llambrichusa.com/distributorsIf you can't find a distributor that caries one of the Llambric catalog items, you can contact the importer, QTI Imports and they will help you: qtimports.comSales@qtimports.com(220) 666-0911Quality Tool ImportsSuite C601 Pittsburgh Ave.Mount Vernon OH 43050
Wall mount hidden fold-out Sapele art table with backlight JN Woodworks 2023-07-07 | This video shows the build of an art table I recently made that is essentially a large picture frame mounted to the wall, but has a hidden, fold down table build into it with an integrated backlight for picture tracing. The project is made from Sapele wood, and has custom made stainless steel hardware.
Tramming both the Z axis and the spindle axis on an AVID CNC router JN Woodworks 2023-05-17 | In this video I show how I tram the Z axis travel to be perpendicular to the machine top, and then the spindle axis on an AVID CNC router. This process would apply to most CNC routers. As pointed out in the comments below, I was not very clear on one item. The method for tramming of the spindle applies for re-tramming or any other case where you already have machined the spoilboard or clamping surface to be parallel to the X and Y axis'. If you have not yet done the initial tram and machined off the top machine surface, then you should use a method where you create a parallel plane to tram against (such as a plate of glass). A good example of this method is youtube.com/watch?v=BXuILLXSpqsAlso, the dual dial indicator tramming tools are ok (the one I showed is reasonably priced). However, single indicator with a beam mounted to a pin chucked in the collet is just as accurate and cheaper (just buy a single dial indicator and a short precision rod for the collet and make a beam out of wood). It is slightly less convenient because you have to rotate it 180 degrees to get both readings.
Vacuum hold down honeycomb table for blue laser CNC cutting JN Woodworks 2023-01-21 | In this video I add vacuum to my honeycomb laser cutting table that holds down the workpiece, as well as removes all smoke from the kerf as an air assist would.This is the honeycomb used in this table: smile.amazon.com/gp/product/B01AYIZ5MK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
CNC motor acceleration tuning in Mach4 to reduce vibrations that degrade cut and laser quality JN Woodworks 2022-12-22 | In this video I go over the pros and cons of changing the motor acceleration settings in Mach4 to reduce vibrations that degrade spindle cut quality and laser line quality. I also cover Constant Velocity mode, how it works, and how to adjust it. The work was done on an AVID CNC.A video on CV mode in Mach 3: youtube.com/watch?v=QRmgSG8sBZU
Heavy duty table saw crosscut/miter fence and other accessories JN Woodworks 2022-11-01 | In this video I give an overview of the crosscut fence I built for my Powermatic table saw, plus the other accessories I added to the saw.
CNC Opt laser customized wooden spoons on my AVID CNC JN Woodworks 2022-10-24 | In this video I show how to import a model of a spoon into Vectric Vcarve Pro, create the lettering, and laser the text on the contour if the inside of the spoon. This is using an Opt laser mounted on my AVID CNC This method can be used to laser on top of any 3D surface with Vectric Vcare or Aspire.Good video on how to create a convex shape in Fusion 360youtube.com/watch?v=pZB5owGTy_YMy Google Drive with post processors and laser hookup instructions for AVID CNC's:drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=sharing
Beginners Guide to CNC Router Vcarve Sign Making Part 2 JN Woodworks 2022-10-18 | This is a beginners guide to Vcarve sign making. This video is part two of two, and covers the application of Oramask, carving on the CNC, sealing, and painting.Part one covers downloading a design from a website, importing the design into Vectric Vcarve, preparing the vectors for toolpath generation, and finally creating toolpaths and saving them.Link to Part1: youtu.be/e0vZYUfDwW4Oramask used in this video: smile.amazon.com/gp/product/B079JB36NG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Vcarve bits used in this video: smile.amazon.com/Amana-Tool-Signmaking-Lettering-Engraving/dp/B00IDEOLQO/ref=sr_1_1_sspa?crid=3QKFCFL9ESNYS&keywords=Amana+Tool+AMS-150&qid=1666064384&qu=eyJxc2MiOiIwLjAwIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=amana+tool+ams-150%2Caps%2C130&sr=8-1-spons&ufe=app_do%3Aamzn1.fos.ac2169a1-b668-44b9-8bd0-5ec63b24bcb5&psc=1&smid=A1WO0LWTFI0BL8
Beginners Guide to CNC Router Vcarve Sign Making Part 1 JN Woodworks 2022-10-18 | This is a beginners guide to Vcarve sign making. This video is part one of two, and covers downloading a design from a website, importing the design into Vectric Vcarve, preparing the vectors for toolpath generation, and finally creating toolpaths and saving them.Part two will cover the application of Oramask, carving on the CNC, sealing, and painting.Link to Part2: youtu.be/OhvoneMtmVkOramask used in this video: smile.amazon.com/gp/product/B079JB36NG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1Vcarve bits used in this video: smile.amazon.com/Amana-Tool-Signmaking-Lettering-Engraving/dp/B00IDEOLQO/ref=sr_1_1_sspa?crid=3QKFCFL9ESNYS&keywords=Amana+Tool+AMS-150&qid=1666064384&qu=eyJxc2MiOiIwLjAwIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=amana+tool+ams-150%2Caps%2C130&sr=8-1-spons&ufe=app_do%3Aamzn1.fos.ac2169a1-b668-44b9-8bd0-5ec63b24bcb5&psc=1&smid=A1WO0LWTFI0BL8
Ceiling mount articulating arm to mount my monitor and computer for my AVID CNC machine JN Woodworks 2022-10-18 | In this short video I show and describe the use of an articulating ceiling mount arm to hold the monitor and computer for my AVID CNC machine. This keeps the floor and benchtop clear of computers and cables, and allows viewing from a wide area in my shop.Arm: ICW ELQ5120-C8X12 Elite Quick Link Single Arm LCD Ceiling MountComputer: smile.amazon.com/dp/B09V7R5M7G?psc=1&ref=ppx_yo2ov_dt_b_product_detailsMonitor: SAMSUNG 27-inch M5 Smart Monitor (LS27AM500NNXZA)
Laser engraving on stainless steel necklace pendants with the Opt Lasers PLH3D-XT-50 and my AVID CNC JN Woodworks 2022-09-07 | In this video I laser engrave some bitmap images on polished stainless steel necklace pendants using image rastering. CNC Machine: AVID Pro 48 x 48 avidcnc.comLaser: Opt Lasers PLH3D-XT-50optlasersgrav.com/PLH3D-XT-Series?opt=y2035Stainless steel necklace pendants: smile.amazon.com/gp/product/B078K78VDD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1Laser Image processing software: ImagR imag-r.com
Phone case customization using AVID CNC and OPT Laser JN Woodworks 2022-09-02 | In this video we mill out a pocket in the back of a cell phone case to receive a piece of cherry veneer that is lasered with a back to back Oregon/Arizona scene.
Making a king size Sapele bed with hand carved rope molding and CNC cut panels and rails. JN Woodworks 2022-07-16 | In this video I show how I made a king sized bed out of quarter sawn Sapele. I hand carved the top molding in a twisted rope pattern, and cut many of the other components on the CNC.
Review of Opt Lasers PLH3D-XT-50 high resolution blue diode laser head for CNC machines JN Woodworks 2022-05-04 | In this video I review the the PLH3D-XT-50 laser head from Opt Lasers. I mounted it on my AVID CNC and review some of the issues (such as CNC vibrations) with trying to use such a fine beam laser, and go through the different uses and capabilities of the laser. This laser is really ideal for high resolution rastering and etching, but its cutting ability surprised me as well.Link to the Opt Lasers XT-50 Page:optlasersgrav.com/PLH3D-XT-Series?opt=y2035Link to AVID CNC Page:avidcnc.com
Homing, Hard Stops, Proximity Sensors, and Soft Limits on an AVID CNC JN Woodworks 2022-04-08 | This video describes how homing works, and the relationship between hard stops, proximity sensors and soft limits, and how to properly adjust them. This applies to AVID CNC machines with standard electronics package and the proximity sensor kit.FYI, this is the second version of the video. A viewer pointed out (thank you) that there was a 2 minute section that was upside down, so I corrected that. So if you commented on the first one, that is why the comments are gone because YouTube doesn't allow reloading a new video to the same posting.
Laser Focusing Methods for Diode Lasers JN Woodworks 2022-04-03 | In this video I discuss some methods to measure the optimum focal point of your blue laser, and then some repeatable methods to achieve that optimized focal point over and over.My video on screen editing which has some Laser screen features in it: youtube.com/watch?v=87unMhKO7u8&t=1255sOpt Lasers video on optimizing the focus on a blue laser: youtube.com/watch?v=PP30pUkwDrEMy Google drive with laser screens, Laser setup on AVID CNC, and Vectric post processors: drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=sharingAnother video with some excellent explanation on focusing and optimizing laser settings:youtube.com/watch?v=K-rJD25OGUQ
My latest laser mount for my AVID CNC with Opt Laser JN Woodworks 2022-03-26 | I just finished the third version of my laser mount that has some improvements for things I learned when trying out some picture rastering with my laser.
New Laser Rastering feature using Ethernet Smooth Stepper with my Opt Laser on my AVID CNC - Updated JN Woodworks 2022-03-17 | This video shows how to configure and use the new laser rastering capability released in the 282 version of the ESS Plugin. It also contains information on an ESS giveaway.**** Congratulations to Brian S who won the ESS give away drawing! *****Links to information discussed in the video.-Warp9 Tech Design Website: warp9td.com-JN Woodworks Google Drive with CNC and Laser documentation: drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=sharingAVID CNC: avidcnc.comOpt Lasers: https:optlasers.com/Plug-and-Play-Kits-for-All-CNC-Machines?opt=y2035A couple of nice FB groups doing some nice laser rastering projects:-Free Laser Engraving Files-Den of Lasers-Opt Lasers
Mach4 Screen Editing & new screen features for CNC laser support including laser touch plate support JN Woodworks 2021-12-23 | In this video I show how to use the Mach4 screen editor to customize your Mach4 screen for you needs, including adding new buttons, functions, and keyboard shortcuts for both spindle use, as well as several enhancements for laser use, including electronic touch plate zeroing for the laser.Supplemental Video links:Video from TLAR on adding some simple functions and connecting them to keyboard shortcuts: youtube.com/watch?v=3BYuS_Lbpow&t=523sBasic Screen Editing in Mach4 from Mach Support: youtube.com/watch?v=P1xZkFgS5cQ&t=330sLink to my drive where you can download my modified Screen Set that combines spindle and laser head support: drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=sharingLink to wireless keyboard that I use on my system. I have had this for 2 years and only charged it 2 or 3 times and it has worked flawlessly. smile.amazon.com/gp/product/B00Z81U3YY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
New laser support features in the new Ethernet Smooth Stepper plugin version 278 JN Woodworks 2021-11-27 | In this video I cover the new ESS release as it pertains to CNC laser support. I also go over the different types of laser toolpaths in Vectric (Aspire or Vcarve laser module), as well as a little Gcode and post processor review for laser files.My latest Vectric Post Processor for this release, as well as my laser setup documentation for a laser on an AVID CNC machine, and my latest Mach 4 screen that combines spindle and laser support can be found here: drive.google.com/drive/folders/1xB6J0RZIU1j8g951NkP-8HXC1swC2C-B?usp=sharingIf you have any questions/comments, please put them in the comments section below. I read and respond to all my viewers.
Quincy QT-54 Air Compressor with custom built air dryer and RapidAir air line kit JN Woodworks 2021-11-12 | In this video I give an overview of my new QT-54 air compressor, and the RapidAir hose kit I installed in my garage. I also built a custom air dryer built into the compressor that removes moisture before entering the tank.Parts List:Air Compressornortherntool.com/shop/tools/product_200350475_200350475?cm_mmc=Bing-pla&utm_source=Bing_PLA&utm_medium=Air%20Tools%20%2B%20Compressors%20%3E%20Air%20Compressors%20%3E%20Stationary%20Electric%20Air%20Compressors&utm_campaign=Quincy%20Compressor&utm_content=35239001&cmpid=53403368&agid=3200075880&tgtid=pla-4577404349830921&prdid=35239001&msclkid=31393c9678e413f9901c5d187a68e427&gclid=31393c9678e413f9901c5d187a68e427&gclsrc=3p.dsFlex Hosesmile.amazon.com/gp/product/B00KS6B9D8/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1Regulatorsmile.amazon.com/gp/product/B00DQJQ71S/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1Filter/Water Trapsmile.amazon.com/gp/product/B017GIMWCM/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1Dual Port Outletsmile.amazon.com/gp/product/B00CZ7GQ86/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1Fansmile.amazon.com/gp/product/B014KK7Q84/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=112V Power Supplysmile.amazon.com/gp/product/B07MXXXBV8/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&th=1Maxline Hose Kitsmile.amazon.com/gp/product/B005FKYRTU/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&th=1Transmission Coolersmile.amazon.com/gp/product/B004XONT3E/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1Here is a recent video on how to reduce the noise at the air intake: youtu.be/NvVpTBSVVTc
Building and installing a wraparound walnut fireplace mantel with CNCd nature scene. JN Woodworks 2021-10-18 | This video covers the build and install of a walnut fireplace mantel that wraps around a corner fireplace. I include some templating, sanding, and finishing tips.
Cutting some door rail mortises on my AVID CNC router JN Woodworks 2021-08-14 | This is a quick video showing the versatility of an AVID CNC router to cut mortises for the styles and hinges on a 9ft long door rail, even though the router table is only 4ft wide.
CNC Machine Basic Overview JN Woodworks 2021-07-28 | In this video I cover the basic parts of a CNC machine (both the hardware and software), as well as the basic process flow for generating content and converting it to a format that the machine can run.
Matching Mesquite sit/stand computer desks with epoxy filled voids JN Woodworks 2021-07-02 | In this video I show some of the process (and some of the mistakes) in making a pair of matched mesquite computer desks. The tops have black epoxy pours, and there was a fair amount of CNC work to flatten them, as well as make cutouts for splines and drawer slides.Related resources mentioned in the video:Under Desk wire management tray:smile.amazon.com/gp/product/B07F9ZQMVR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1Desk mount monitor stand:smile.amazon.com/gp/product/B07GFRP5HT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1Sit/stand desk frame:smile.amazon.com/gp/product/B08C5KTK8K/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1Blacktail Studio YouTube Channel:youtube.com/channel/UC6I0KzAD7uFTL1qzxyunkvAMatt's Woodworks "Deep pour Epoxy review":youtube.com/watch?v=aEoMvZe8KQ8&t=1331s
Making mortise and tenons on a walnut art stand/table with AVID CNC router. JN Woodworks 2021-06-28 | In this video I show how a CNC router can speed up making a table top and cutting the mortise and tenon joints to connect the legs.
