Uploaded August 2016 | Updated November 2026, 2 hours ago
The Hoofbag has possession of old books in 8 volumes, originating from the 1930s, handed down from a Grandparent. Newnes' Pictorial Knowledge is a family encyclopedia. Most of the information therein is irrelevant today, although they're still an interesting read. In volume 4 there's a suggested electric motor build. Permanent magnets weren't as common then as now so the motor project designers found a way around this. They suggest a large 'U' staple of the type used for fencing as the base of the electromagnet and tin plate for other components. Inability to source a staple this big, at 70mm and 31.75mm, meant instead used is a sawn off piece of coach bolt. To hand, was some thin springy brass plate that was used to fabricate the commutator and 'brush' from. The armature is made from two scrapped transformer 'I' stampings, centre hole drilled, and a length of 6BA threaded bolt used as the spindle, tapered off at each end. The output of this simple electric motor isn't strong enough to be used to drive anything so the motor is for artistic or science curiosity only. There will be a L8a attempt to build an electric motor more closely associated with the original instructions, time permitting. A big thank you to Shrubbie Leaf for all of the competent video work and production of this simple Hoofbag motor movie.
The Hoofbag has possession of old books in 8 volumes, originating from the 1930s, handed down from a Grandparent. Newnes' Pictorial Knowledge is a family encyclopedia. Most of the information therein is irrelevant today, although they're still an interesting read. In volume 4 there's a suggested electric motor build. Permanent magnets weren't as common then as now so the motor project designers found a way around this. They suggest a large 'U' staple of the type used for fencing as the base of the electromagnet and tin plate for other components. Inability to source a staple this big, at 70mm and 31.75mm, meant instead used is a sawn off piece of coach bolt. To hand, was some thin springy brass plate that was used to fabricate the commutator and 'brush' from. The armature is made from two scrapped transformer 'I' stampings, centre hole drilled, and a length of 6BA threaded bolt used as the spindle, tapered off at each end. The output of this simple electric motor isn't strong enough to be used to drive anything so the motor is for artistic or science curiosity only. There will be a L8a attempt to build an electric motor more closely associated with the original instructions, time permitting. A big thank you to Shrubbie Leaf for all of the competent video work and production of this simple Hoofbag motor movie.










