Uploaded June 2025 | Updated November 2026, 3 days ago
Ever been caught without a £1 coin at the worst time? We were too, so we teamed up with Castlepoint Shopping Centre and made our own trolley tokens. The best thing? They’re all made from bottle tops collected from around Castlepoint. Not only do they work perfectly, they help reduce plastic heading to landfill. Turning trash into trolley treasure 🛒✨
This wasn’t just a fun project — it was part of Castlepoint’s ongoing commitment to reduce plastic waste and give it a new purpose. They've been collecting HDPE bottle tops from shoppers, stores, and from their own general waste, with help from their brilliant site team. Once they’d gathered enough bottle tops, they sent them our way for the transformation.
Bottle tops are donated by the public, by coffee shops on site and saved from the general waste by the awesome site team at Castlepoint. Then they come to us for sorting into their plastic types and cleaned. Once we have enough HDPE tops ready to use, we shred them in our granulator and heat them in our manual injection moulding machines. The mould is placed underneath and the plastic goo is injected into the mould. Once cool, they’re snipped, assembled and ready to be used. The best part is, they can be recycled over and over again back into trolley tokens or any of our other eco-friendly products.
A huge shoutout to @plasticpreneur for designing this incredible mould. They had to precisely calculate the shrinkage of HDPE to make sure that the tokens fit perfectly, and they nailed it on the first attempt. If you want a high-quality injection mould made then give them a shout (and tell them we sent you for an extra discount).
This is just the beginning. We’ve got more exciting ideas in the works with Castlepoint so watch this space.
#recycledplastic #trolleytoken #brothersmake #plasticwaste #diytoken #upcycled #sustainableliving #makersgonnamake
Ever been caught without a £1 coin at the worst time? We were too, so we teamed up with Castlepoint Shopping Centre and made our own trolley tokens. The best thing? They’re all made from bottle tops collected from around Castlepoint. Not only do they work perfectly, they help reduce plastic heading to landfill. Turning trash into trolley treasure 🛒✨
This wasn’t just a fun project — it was part of Castlepoint’s ongoing commitment to reduce plastic waste and give it a new purpose. They've been collecting HDPE bottle tops from shoppers, stores, and from their own general waste, with help from their brilliant site team. Once they’d gathered enough bottle tops, they sent them our way for the transformation.
Bottle tops are donated by the public, by coffee shops on site and saved from the general waste by the awesome site team at Castlepoint. Then they come to us for sorting into their plastic types and cleaned. Once we have enough HDPE tops ready to use, we shred them in our granulator and heat them in our manual injection moulding machines. The mould is placed underneath and the plastic goo is injected into the mould. Once cool, they’re snipped, assembled and ready to be used. The best part is, they can be recycled over and over again back into trolley tokens or any of our other eco-friendly products.
A huge shoutout to @plasticpreneur for designing this incredible mould. They had to precisely calculate the shrinkage of HDPE to make sure that the tokens fit perfectly, and they nailed it on the first attempt. If you want a high-quality injection mould made then give them a shout (and tell them we sent you for an extra discount).
This is just the beginning. We’ve got more exciting ideas in the works with Castlepoint so watch this space.
#recycledplastic #trolleytoken #brothersmake #plasticwaste #diytoken #upcycled #sustainableliving #makersgonnamake




![Cutting Board made from Recycled HDPE Plastic
💚 A huge thank you to The Brotherhood: https://www.patreon.com/brothersmake
♻️ Check out our recycled plastic store: https://www.brothersmake.com/shop
In this video we turn a load of milk bottle tops and other recycled plastic we have been collecting into a fully functioning chopping board - we even included a juice groove! Something important to note is that the low melting temperature of HDPE means that this should not be used for anything hot, nor should it be used as a surface to rest hot saucepans on. However it is perfect for cutting fruit and vegetables etc. It shouldnt be dishwashed but is very easy to clean.
We are aware that there will be a lot of comments regarding the safety of using recycled plastic for items that come into contact with food. We have researched this fairly extensively and we are confident that our process is clean enough to produce food-grade HDPE: HDPE is a food-grade plastic, hence why it is used for milk bottles and packaging for other edible goods. This is most likely sourced from raw (or virgin) polymer which means that it has not gone through a recycling process. This issue with recycling plastic is that there are multiple avenues for the plastic to become contaminated. The 3 main ones being;
1) Remains from the previous content it was holding
2) Labels/residue left on the plastic itself
3) Potential burning of the plastic, which introduces toxins (both as fumes and within the resulting plastic product itself)
We are very meticulous when it comes to the cleaning of our plastic. All plastic that we receive is hand-sorted to ensure it is indeed HDPE and that there are no non-plastic contaminants left on the plastic. We run the plastic through at least 3 sorting and cleaning cycles before we ever introduce it to heat. This covers (1) and (2). HDPEs burning point is anything over 180 degrees Celcius. We have had enough experience with melting this plastic to know when it has got too hot. We keep our over/grill at around 140-160 degrees, which never introduces any fumes or burning to any of the plastic. This covers (3).
The US Food and Drug Administration has recently (March 2020) approved recycled HDPE to be used for food and drink packaging providing the feedstock is food-grade and contaminant concentrations were below its “threshold of regulatory concern” (0.5 parts per billion or less in the food). [https://bit.ly/33F4Ueq]
If you are still concerned about the use of recycled HDPE for use with food then feel free to not use it yourself! We have done the research and have decided that we think it is safe based on our specific process.
This video is not telling you that you have to do this, rather it is showing you what is possible! If you enjoyed the video or learnt something new, please consider subscribing. Thanks!
#BrothersMake #HDPE #PreciousPlastic #HDPERecycling #RecycledPlastic #RecycledPlasticBottles #PlasticRecycling #CuttingBoard
Get started recycling by checking out our EQUIPMENT links:
https://amzn.eu/6VlmURY
Consider supporting us on PATREON:
https://www.patreon.com/brothersmake/
Follow us on INSTAGRAM:
https://www.instagram.com/brothersmake/
Link to our MERCH store:
https://teespring.com/en-GB/stores/brothers-make-apparel
Check out our PLAYLIST with all of our HDPE videos:
https://bit.ly/2SARcTo
MUSIC:
Hanging Out - Bruno E
Dude - Patrick Patrikios Cutting Board made from Recycled HDPE Plastic](https://i.ytimg.com/vi/jx2B55YG4SY/mqdefault.jpg)





