Uploaded November 2025 | Updated September 2026, 1 week ago
𝗛𝗶𝗴𝗵-𝗦𝗽𝗲𝗲𝗱 𝗣𝗮𝗰𝗸𝗮𝗴𝗶𝗻𝗴 𝗠𝗼𝗹𝗱𝗶𝗻𝗴 𝗳𝗼𝗿 𝗗𝗶𝘃𝗲𝗿𝘀𝗲 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀
Husky’s next-generation 𝗛𝘆𝗽𝗲𝗿𝗦𝘆𝗻𝗰™ packaging platform continues our decades-long commitment to excellence, delivering superior performance across food, medical, and consumer packaging applications:
🟡 𝗧𝗵𝗶𝗻𝘄𝗮𝗹𝗹 𝗽𝗮𝗰𝗸𝗮𝗴𝗶𝗻𝗴: Advanced injection capabilities and Reflex platen technology enable aggressive cycle times, high-quality parts, and extended mold life.
🟡 𝗜𝗻𝗱𝘂𝘀𝘁𝗿𝗶𝗮𝗹 𝗽𝗮𝗶𝗹𝘀: High-throughput capabilities supported by optimized melt-delivery components.
🟡𝗦𝗽𝗲𝗰𝗶𝗮𝗹𝘁𝘆 𝗰𝗹𝗼𝘀𝘂𝗿𝗲𝘀: Generous tie-bar spacing and superior mold-carrying capacity for high-cavity molds.
🟡 𝗠𝗲𝗱𝗶𝗰𝗮𝗹 𝗱𝗲𝘃𝗶𝗰𝗲𝘀: Exceptional process repeatability and consistency for ultra-tight tolerances and critical requirements.
🟡 𝗖𝗼𝗻𝘀𝘂𝗺𝗲𝗿 & 𝗰𝗼𝘀𝗺𝗲𝘁𝗶𝗰 𝗽𝗮𝗰𝗸𝗮𝗴𝗶𝗻𝗴: Flexible operation for a wide range of applications and raw materials.
𝗜𝗻 𝘁𝗵𝗶𝘀 𝘃𝗶𝗱𝗲𝗼, 𝘆𝗼𝘂 𝘄𝗶𝗹𝗹 𝘀𝗲𝗲 𝘁𝗵𝗲 𝘀𝘆𝘀𝘁𝗲𝗺 𝗶𝗻 𝗮𝗰𝘁𝗶𝗼𝗻:
👉 8cav integrated system for yogurt cup 230 ml
👉 3.54s cycle time
👉 Husky HyperSync™HN400 RS60/55
👉 Husky Hot Runner and Altanium Mold Controller
👉 Muller Mold and Automation
𝗛𝗶𝗴𝗵-𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 𝗦𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 𝗳𝗼𝗿 𝗦𝘂𝘀𝘁𝗮𝗶𝗻𝗮𝗯𝗹𝗲 𝗣𝗮𝗰𝗸𝗮𝗴𝗶𝗻𝗴
The next generation of our packaging molding platform represents an exciting evolution—offering a high-performance injection molding system with a new look and feel, enhanced hot runner and mold controller integration, and the introduction of Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™, our real-time, proactive remote monitoring solution for packaging.
🟠 𝗘𝗻𝗵𝗮𝗻𝗰𝗲𝗱 𝗲𝗻𝗲𝗿𝗴𝘆 𝗲𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆: Incorporates the latest technologies—including an electrically driven mold-stroke servo-pump powerpack, adaptive system pressure, and an energy recovery system—to reduce energy consumption without compromising performance.
🟠 𝗦𝗽𝗲𝗲𝗱 𝗮𝗻𝗱 𝗽𝗿𝗲𝗰𝗶𝘀𝗶𝗼𝗻 𝗰𝗼𝗺𝗯𝗶𝗻𝗲𝗱: Faster injection, higher pressure and throughput, and rapid recovery rates deliver unmatched productivity.
🟠 𝗢𝗽𝘁𝗶𝗺𝗶𝘇𝗲𝗱 𝗺𝗲𝗹𝘁 𝗱𝗲𝗹𝗶𝘃𝗲𝗿𝘆: Fully integrated melt-stream design, combining IMM and hot runner systems for consistent part quality and highly repeatable processes.
🟠 𝗔𝗹𝘄𝗮𝘆𝘀-𝗰𝗼𝗻𝗻𝗲𝗰𝘁𝗲𝗱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲: The new Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™ for Packaging tracks over 70 unique performance insights, turning real-time data into a competitive edge.
𝗪𝗵𝘆 Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™?
Since its introduction in 2021, Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™ has been adopted in more than 1,500 customer contracts worldwide. It consistently delivers measurable improvements in operational efficiency, system performance, and part quality.
Now, our Packaging Systems benefit from real-time monitoring of asset efficiency, with Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™ proactively engaging with your team. The result? Greater reliability, optimized output, and the assurance of maintaining the lowest total cost of production.
Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™ service contracts are available as an optional add-on with every system purchase—giving you the flexibility to choose the level of support that best fits your operation.
🔴 𝗣𝗿𝗼𝗮𝗰𝘁𝗶𝘃𝗲: We detect potential issues before they occur.
🔴 𝗣𝗿𝗲𝗱𝗶𝗰𝘁𝗶𝘃𝗲: Husky Genius algorithms forecast system performance trends and deterioration.
🔴 𝗧𝗿𝗮𝗻𝘀𝗽𝗮𝗿𝗲𝗻𝘁: Our "We Call You" service ensures you’re informed before an issue impacts production.
👉 Learn more about 𝗛𝗶𝗴𝗵-𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 𝗣𝗮𝗰𝗸𝗮𝗴𝗶𝗻𝗴 𝗣𝗹𝗮𝘁𝗳𝗼𝗿𝗺𝘀
husky.co/en/solutions/systems/hypersync-packaging-injection-molding-systems
👉 Learn more about 𝗛𝘂𝘀𝗸𝘆 𝗖𝗼𝗻𝘁𝗿𝗼𝗹𝗹𝗲𝗿 𝗧𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝗶𝗲𝘀
husky.co/en/solutions/Next-Generation-Altanium
👉 Learn more about 𝗛𝘂𝘀𝗸𝘆 𝗛𝗼𝘁 𝗥𝘂𝗻𝗻𝗲𝗿 𝗦𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀
husky.co/en/solutions/hot-runners
📞 Contact your local Husky expert today:
husky.co/en/contact
𝗛𝗶𝗴𝗵-𝗦𝗽𝗲𝗲𝗱 𝗣𝗮𝗰𝗸𝗮𝗴𝗶𝗻𝗴 𝗠𝗼𝗹𝗱𝗶𝗻𝗴 𝗳𝗼𝗿 𝗗𝗶𝘃𝗲𝗿𝘀𝗲 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀
Husky’s next-generation 𝗛𝘆𝗽𝗲𝗿𝗦𝘆𝗻𝗰™ packaging platform continues our decades-long commitment to excellence, delivering superior performance across food, medical, and consumer packaging applications:
🟡 𝗧𝗵𝗶𝗻𝘄𝗮𝗹𝗹 𝗽𝗮𝗰𝗸𝗮𝗴𝗶𝗻𝗴: Advanced injection capabilities and Reflex platen technology enable aggressive cycle times, high-quality parts, and extended mold life.
🟡 𝗜𝗻𝗱𝘂𝘀𝘁𝗿𝗶𝗮𝗹 𝗽𝗮𝗶𝗹𝘀: High-throughput capabilities supported by optimized melt-delivery components.
🟡𝗦𝗽𝗲𝗰𝗶𝗮𝗹𝘁𝘆 𝗰𝗹𝗼𝘀𝘂𝗿𝗲𝘀: Generous tie-bar spacing and superior mold-carrying capacity for high-cavity molds.
🟡 𝗠𝗲𝗱𝗶𝗰𝗮𝗹 𝗱𝗲𝘃𝗶𝗰𝗲𝘀: Exceptional process repeatability and consistency for ultra-tight tolerances and critical requirements.
🟡 𝗖𝗼𝗻𝘀𝘂𝗺𝗲𝗿 & 𝗰𝗼𝘀𝗺𝗲𝘁𝗶𝗰 𝗽𝗮𝗰𝗸𝗮𝗴𝗶𝗻𝗴: Flexible operation for a wide range of applications and raw materials.
𝗜𝗻 𝘁𝗵𝗶𝘀 𝘃𝗶𝗱𝗲𝗼, 𝘆𝗼𝘂 𝘄𝗶𝗹𝗹 𝘀𝗲𝗲 𝘁𝗵𝗲 𝘀𝘆𝘀𝘁𝗲𝗺 𝗶𝗻 𝗮𝗰𝘁𝗶𝗼𝗻:
👉 8cav integrated system for yogurt cup 230 ml
👉 3.54s cycle time
👉 Husky HyperSync™HN400 RS60/55
👉 Husky Hot Runner and Altanium Mold Controller
👉 Muller Mold and Automation
𝗛𝗶𝗴𝗵-𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 𝗦𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 𝗳𝗼𝗿 𝗦𝘂𝘀𝘁𝗮𝗶𝗻𝗮𝗯𝗹𝗲 𝗣𝗮𝗰𝗸𝗮𝗴𝗶𝗻𝗴
The next generation of our packaging molding platform represents an exciting evolution—offering a high-performance injection molding system with a new look and feel, enhanced hot runner and mold controller integration, and the introduction of Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™, our real-time, proactive remote monitoring solution for packaging.
🟠 𝗘𝗻𝗵𝗮𝗻𝗰𝗲𝗱 𝗲𝗻𝗲𝗿𝗴𝘆 𝗲𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆: Incorporates the latest technologies—including an electrically driven mold-stroke servo-pump powerpack, adaptive system pressure, and an energy recovery system—to reduce energy consumption without compromising performance.
🟠 𝗦𝗽𝗲𝗲𝗱 𝗮𝗻𝗱 𝗽𝗿𝗲𝗰𝗶𝘀𝗶𝗼𝗻 𝗰𝗼𝗺𝗯𝗶𝗻𝗲𝗱: Faster injection, higher pressure and throughput, and rapid recovery rates deliver unmatched productivity.
🟠 𝗢𝗽𝘁𝗶𝗺𝗶𝘇𝗲𝗱 𝗺𝗲𝗹𝘁 𝗱𝗲𝗹𝗶𝘃𝗲𝗿𝘆: Fully integrated melt-stream design, combining IMM and hot runner systems for consistent part quality and highly repeatable processes.
🟠 𝗔𝗹𝘄𝗮𝘆𝘀-𝗰𝗼𝗻𝗻𝗲𝗰𝘁𝗲𝗱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲: The new Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™ for Packaging tracks over 70 unique performance insights, turning real-time data into a competitive edge.
𝗪𝗵𝘆 Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™?
Since its introduction in 2021, Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™ has been adopted in more than 1,500 customer contracts worldwide. It consistently delivers measurable improvements in operational efficiency, system performance, and part quality.
Now, our Packaging Systems benefit from real-time monitoring of asset efficiency, with Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™ proactively engaging with your team. The result? Greater reliability, optimized output, and the assurance of maintaining the lowest total cost of production.
Husky 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲+𝗘𝗹𝗶𝘁𝗲™ service contracts are available as an optional add-on with every system purchase—giving you the flexibility to choose the level of support that best fits your operation.
🔴 𝗣𝗿𝗼𝗮𝗰𝘁𝗶𝘃𝗲: We detect potential issues before they occur.
🔴 𝗣𝗿𝗲𝗱𝗶𝗰𝘁𝗶𝘃𝗲: Husky Genius algorithms forecast system performance trends and deterioration.
🔴 𝗧𝗿𝗮𝗻𝘀𝗽𝗮𝗿𝗲𝗻𝘁: Our "We Call You" service ensures you’re informed before an issue impacts production.
👉 Learn more about 𝗛𝗶𝗴𝗵-𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 𝗣𝗮𝗰𝗸𝗮𝗴𝗶𝗻𝗴 𝗣𝗹𝗮𝘁𝗳𝗼𝗿𝗺𝘀
husky.co/en/solutions/systems/hypersync-packaging-injection-molding-systems
👉 Learn more about 𝗛𝘂𝘀𝗸𝘆 𝗖𝗼𝗻𝘁𝗿𝗼𝗹𝗹𝗲𝗿 𝗧𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝗶𝗲𝘀
husky.co/en/solutions/Next-Generation-Altanium
👉 Learn more about 𝗛𝘂𝘀𝗸𝘆 𝗛𝗼𝘁 𝗥𝘂𝗻𝗻𝗲𝗿 𝗦𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀
husky.co/en/solutions/hot-runners
📞 Contact your local Husky expert today:
husky.co/en/contact
