Uploaded November 2014 | Updated September 2026, 4 hours ago
UPDATE- You should add a 5Amp Blade Fuse in the positive battery wire, in the battery tray area where you can reach it. This is to protect the motor from a possible overload caused by some elite mags or wear in the cycle control mechanism.
Final connections and round up of the mod.
Part 1 is here youtu.be/RQwaljyFKnc
Part 2 is here youtu.be/YS-_EQvbCaA?list=UUaxTtGcXIZfIJ6EcOLU1EYA
Test results- NOT THIS BLASTER- I will get that done this week. Note the interleaved spring in the first build is worse than the single 6kg.
docs.google.com/spreadsheet/pub?key=0Ai0yaQwoF0wwdDVfU0xrcXlkQVB6RTlFYUtPSkNiWkE&output=html
To get your wiring kit and 6kg spring-
blastersmiths.co.uk/products/stampede-wiring-upgrade-kit
UPDATE- You should add a 5Amp Blade Fuse in the positive battery wire, in the battery tray area where you can reach it. This is to protect the motor from a possible overload caused by some elite mags or wear in the cycle control mechanism.
Final connections and round up of the mod.
Part 1 is here youtu.be/RQwaljyFKnc
Part 2 is here youtu.be/YS-_EQvbCaA?list=UUaxTtGcXIZfIJ6EcOLU1EYA
Test results- NOT THIS BLASTER- I will get that done this week. Note the interleaved spring in the first build is worse than the single 6kg.
docs.google.com/spreadsheet/pub?key=0Ai0yaQwoF0wwdDVfU0xrcXlkQVB6RTlFYUtPSkNiWkE&output=html
To get your wiring kit and 6kg spring-
blastersmiths.co.uk/products/stampede-wiring-upgrade-kit
