![[Nerf Mod] Nerf Kenner Crossbow/ Stryfe Integration (Build Vlog Part 1) @NaptownNerf](https://i.ytimg.com/vi/yYaIfqXPMlc/maxresdefault.jpg)
Uploaded February 2024 | Updated September 2026, 2 hours ago
In this video, I discuss my plan of attack of integrating a Nerf, 1995 Kenner Crossbow with a Stryfe. This is my entry into Mr. Nathan's #mergemasters2024 contest. It has definitely been a while since I have done an integration and this is one that's been on the bucket list for a while. If you have any questions or thoughts please feel free to leave them in the common section.
SUBSCRIBE HERE: youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: instagram.com/naptownnerf
My Facebook page: facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! teespring.com/stores/naptown-nerf
Talon Stryfe Video: youtube.com/watch?v=zHs_-pkpK5M
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
[Buy Here]
Nerf Stryfe: amzn.to/49ojcyn
Devcon: amzn.to/3SUxhP3
6-pack much better deal! amzn.to/4c6RWGX
File set: amzn.to/3SgTaY9
Dremel: amzn.to/3Uo2Di5
Dremel flex extension: amzn.to/4855gsn
Dremel cutting wheels: amzn.to/3SHzqx8
X-Acto knife: amzn.to/3SKbJ7m
Blaster work mat: amzn.to/474StW2
Deburring tool: amzn.to/3HgFdDq
Worker Talon Mags:
15 round - amzn.to/3UnaBba
10 round - amzn.to/3w0KkoW
18 Banana - amzn.to/491Vl81
Worker darts: outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021
Contest details: youtu.be/4Mz0oyNy4RQ?si=6d1OWJsXHFCc1aqm
Time codes:
#nerf #nerfmod
In this video, I discuss my plan of attack of integrating a Nerf, 1995 Kenner Crossbow with a Stryfe. This is my entry into Mr. Nathan's #mergemasters2024 contest. It has definitely been a while since I have done an integration and this is one that's been on the bucket list for a while. If you have any questions or thoughts please feel free to leave them in the common section.
SUBSCRIBE HERE: youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: instagram.com/naptownnerf
My Facebook page: facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! teespring.com/stores/naptown-nerf
Talon Stryfe Video: youtube.com/watch?v=zHs_-pkpK5M
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
[Buy Here]
Nerf Stryfe: amzn.to/49ojcyn
Devcon: amzn.to/3SUxhP3
6-pack much better deal! amzn.to/4c6RWGX
File set: amzn.to/3SgTaY9
Dremel: amzn.to/3Uo2Di5
Dremel flex extension: amzn.to/4855gsn
Dremel cutting wheels: amzn.to/3SHzqx8
X-Acto knife: amzn.to/3SKbJ7m
Blaster work mat: amzn.to/474StW2
Deburring tool: amzn.to/3HgFdDq
Worker Talon Mags:
15 round - amzn.to/3UnaBba
10 round - amzn.to/3w0KkoW
18 Banana - amzn.to/491Vl81
Worker darts: outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021
Contest details: youtu.be/4Mz0oyNy4RQ?si=6d1OWJsXHFCc1aqm
Time codes:
#nerf #nerfmod
![[Nerf Mod] Nerf Kenner Crossbow/ Stryfe Integration (Build Vlog Part 1)](https://i.ytimg.com/vi/yYaIfqXPMlc/mqdefault.jpg "[Nerf Mod] Nerf Kenner Crossbow/ Stryfe Integration (Build Vlog Part 1)
In this video, I discuss my plan of attack of integrating a Nerf, 1995 Kenner Crossbow with a Stryfe. This is my entry into Mr. Nathans #mergemasters2024 contest. It has definitely been a while since I have done an integration and this is one thats been on the bucket list for a while. If you have any questions or thoughts please feel free to leave them in the common section.
SUBSCRIBE HERE: http://www.youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
Talon Stryfe Video: https://www.youtube.com/watch?v=zHs pkpK5M
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
[Buy Here]
Nerf Stryfe: https://amzn.to/49ojcyn
Devcon: https://amzn.to/3SUxhP3
6-pack much better deal! https://amzn.to/4c6RWGX
File set: https://amzn.to/3SgTaY9
Dremel: https://amzn.to/3Uo2Di5
Dremel flex extension: https://amzn.to/4855gsn
Dremel cutting wheels: https://amzn.to/3SHzqx8
X-Acto knife: https://amzn.to/3SKbJ7m
Blaster work mat: https://amzn.to/474StW2
Deburring tool: https://amzn.to/3HgFdDq
Worker Talon Mags:
15 round - https://amzn.to/3UnaBba
10 round - https://amzn.to/3w0KkoW
18 Banana - https://amzn.to/491Vl81
Worker darts: https://outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021
Contest details: https://youtu.be/4Mz0oyNy4RQ?si=6d1OWJsXHFCc1aqm
Time codes:
#nerf #nerfmod")
![[Nerf Mod] Mini Stryfe (What the Stryfe X shouldve been!)](https://i.ytimg.com/vi/zHs_-pkpK5M/mqdefault.jpg "[Nerf Mod] Mini Stryfe (What the Stryfe X shouldve been!)
Today we take a standard Nerf Stryfe and minimize it to fit Worker Talon mags. Using the ade.LINE.com Talon Mag Mini Stryfe Conversion Kit we make this the ultimate half-dart Stryfe! This is what the Stryfe X mag well shouldve looked like! Hope you find this mod guide helpful and informative. If you have any questions please feel free to leave them in the common section.
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
SUBSCRIBE HERE: http://www.youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
Talon Stryfe conversion kit files: https://ade-line.com/products/talon-stryfe
Hawki007 guide video: https://youtu.be/GSGvNrNh5kU?si=tj4cBYYXcgsgZnOH
[Buy Here]
Nerf Stryfe: https://amzn.to/49ojcyn
Devcon: https://amzn.to/3SUxhP3
6-pack much better deal! https://amzn.to/4c6RWGX
File set: https://amzn.to/3SgTaY9
Dremel: https://amzn.to/3Uo2Di5
Dremel flex extension: https://amzn.to/4855gsn
Dremel cutting wheels: https://amzn.to/3SHzqx8
X-Acto knife: https://amzn.to/3SKbJ7m
Blaster work mat: https://amzn.to/474StW2
Deburring tool: https://amzn.to/3HgFdDq
Worker Talon Mags:
15 round - https://amzn.to/3UnaBba
10 round - https://amzn.to/3w0KkoW
18 Banana - https://amzn.to/491Vl81
Worker darts: https://outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021
Time codes:
0:00 - Intro
1:47 - Stryfe teardown
2:13 - fitting template
3:32 - cutting/filing side 1 time-lapse
4:42 - checking alignment, tagging in place side 1
7:10 - modifying side 2 time-lapse
9:40 - double checking alignment
11:10 - test fitting both shells together
13:18 - time to Devcon into place
14:47 - magwell and catch modification
22:36 - test fitting magazine
23:38 - final thoughts
[MUSIC]
Title: Buddha
Artist: Kontekst
Genre: Hip Hop & Rap
Mood: Bright
Download / Stream / Support: http://bit.ly/2Pe7mBN
Track: Drive — Markvard [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Drive — Markvard | Free Background M...
Free Download / Stream: https://alplus.io/drive
Track: Seaside — Thomas Gresen [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Seaside — Thomas Gresen | Free Backgr...
Free Download / Stream: https://alplus.io/seaside
#nerf #nerfmod #nerfstryfe")
![[Nerf Mod] Ready To Paint! Nerf Kenner Crossbow, Stryfe Integration (Build Vlog Part 8)](https://i.ytimg.com/vi/zj_0Z7WfKnM/mqdefault.jpg "[Nerf Mod] Ready To Paint! Nerf Kenner Crossbow, Stryfe Integration (Build Vlog Part 8)
Today I take care of everything that needs to be done before paint. I relocated the switch for LEDs, placed the voltmeter, and modified the stock for LEDs. I also get the inside of the blaster painted and imperfections spot puttied. Let me know your thoughts in the comments section below.
SUBSCRIBE HERE: http://www.youtube.com/c/NaptownNerf
[Please follow me on the platforms below]
My Instagram: https://www.instagram.com/naptownnerf
My Facebook page: https://www.facebook.com/Naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! https://teespring.com/stores/naptown-nerf
Full Build Vlog Playlist: https://youtu.be/yYaIfqXPMlc?si=Skunhx3S4IHDy5_u
Talon Stryfe Mod Video: https://www.youtube.com/watch?v=zHs pkpK5M
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
[Buy Here]
Nerf Stryfe: https://amzn.to/49ojcyn
[Modding Tools and Supplies]
Devcon: https://amzn.to/3SUxhP3
6-pack is a much better deal! https://amzn.to/4c6RWGX
Apoxy Sculpt: https://amzn.to/4bE6EoH
File set: https://amzn.to/3SgTaY9
Dremel: https://amzn.to/3Uo2Di5
Dremel flex extension: https://amzn.to/4855gsn
Dremel cutting wheels: https://amzn.to/3SHzqx8
X-Acto knife: https://amzn.to/3SKbJ7m
Blaster work mat: https://amzn.to/474StW2
Deburring tool: https://amzn.to/3HgFdDq
Screwdrivers: https://amzn.to/3urQAWw
Calipers: https://amzn.to/48lfiWc
Square set:  https://amzn.to/3I2vC3u
Side cutters: https://amzn.to/4bIcUvv
Black and Decker palm sander: https://amzn.to/3IFR7Hz
Black and decker replacement 220 grit sanding pads: https://amzn.to/3IH40kG
Hot glue gun: https://amzn.to/49X69Vh
Hot glue sticks: https://amzn.to/3wdCMPF
Sharpie: https://amzn.to/3SIbI2O
https://amzn.to/49Is02x
Sandpaper: https://amzn.to/49h3Ko9
https://amzn.to/49EQcTj
Styrene sheet: https://amzn.to/3UJ9J0y
ABS sheet: https://amzn.to/49jycOC
Polycarbonate sheet: https://amzn.to/3SLSvwY
PPE VERY IMPORTANT!
Gloves: https://amzn.to/3IQqIXD
Dust mask: https://amzn.to/3PA991I
Paint mask: https://amzn.to/49a66Es
Eye protection: https://amzn.to/3x5EVgS
Worker Talon Mags:
15 round - https://amzn.to/3UnaBba
10 round - https://amzn.to/3w0KkoW
18 Banana - https://amzn.to/491Vl81
Worker darts: https://outofdarts.com/products/worker-short-darts-200-pack-gen3-improved-darts-2021
Contest details: https://youtu.be/4Mz0oyNy4RQ?si=6d1OWJsXHFCc1aqm
[Music]
Track: Outer Space — SOMM [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Outer Space — SOMM | Free Background ...
Free Download / Stream: https://alplus.io/outer-space
#nerf #nerfmod #mergemasters2024")
