Neptune 4 Max Review and a FIX for the PROBLEMS EVERYONE IS HAVING @FunctionalPrintFriday
Neptune 4 Max Review and a FIX for the PROBLEMS EVERYONE IS HAVING  @FunctionalPrintFriday
Uploaded January 2024 | Updated November 2026, 3 hours ago
STL's and links: fpfdesigns.com

My starting GCODE (for OrcaSlicer):
---------------------------------------------------------
;ELEGOO NEPTUNE 4 MAX
M220 S100 ;Set the feed speed to 100%
M221 S100 ;Set the flow rate to 100%
M104 S140 ;set nozzle to 140C, but don't wait for it
M190 S[bed_temperature_initial_layer_single] ;set bed temp and wait for it
G4 P1500000; wait 25 minutes for the bed temp to stabilize further
G29 ;auto bed-leveling
G90 ;absolute positioning
G1 Z10 F300
G1 X1.5 Y10 F6000
G1 Z0 F300
M109 S[nozzle_temperature_initial_layer]
G92 E0 ;Reset Extruder
G1 X1.5 Y10 Z0.4 F300 ;Move to purge start position
G1 Y110 E30 F400 ;Draw purge line
G1 Z0.6 F120.0 ;Move up a little
G1 Y105 F3000
G92 E0 ;Reset Extruder
---------------------------------------------------------
My N4Max Orca Profile: fpfdesigns.com/software/N4Max.orca_printer.zip
N4 Camera Mount: youtu.be/fsqHY-fASec

Outro music is "Quantum" by "Vapora", used with explicit permission from the artist. youtu.be/iuntoCBZJfA

New videos published every Friday, featuring a new 3D printed functional object, how I use it, and design considerations.

The work depicted in this video is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License or other non-commercial license.

elegoo
n4max
n4m
overextrusion
underextrusion
gcode
fixed
layer shift
orca slicer
heatbed
saturation
dial indicator
klipper
functional
print
fpf
PLA
Neptune 4 Max Review and a FIX for the PROBLEMS EVERYONE IS HAVINGHow hard is it to learn CNC? - Makera Carvera Air3D Printed Trimmer Line Keeper3D Printed TouchDRO Display Mount for Lathe3D Printed Lathe Chuck Alignment & Mounting Sleds - PM-1440GT3D Printed Masa SpreaderEast Coast RepRap Festival and Part 1 of Replacing a Dial Indicator Back3D Prints - 7 Years Outside3D Printed Taper Tooling Drawerganization for Kennedy Chest3D Printed Vent for Enclosed Light FixtureFixing Mistakes and Moving Forward on the Laser EnclosureBambu A1 Unboxing, Assembly, Review, and BUDGET Printer Comparison
Functional Print Friday |

Neptune 4 Max Review and a FIX for the PROBLEMS EVERYONE IS HAVING

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER