Uploaded June 2026 | Updated November 2026, 13 hours ago
Your pool doesn’t care what RPM your pump runs at. It cares about flow. And most of the headaches we see as pool owners and pool service pros start when circulation quietly drifts away from what the pool actually needs. I sit down with Sean McDermott, Executive Vice President at H2 Flow Controls, to unpack the Nautilus VSF variable speed pool pump and the idea behind it: stop guessing speeds and start controlling real, measured gallons per minute.
We dig into adaptive flow, including constant flow mode and turnover mode, and why “set it and forget it” RPM schedules often fall apart as filters get dirty, plumbing conditions change, and water features or in-floor systems cycle on and off. Sean explains how the pump adjusts automatically to maintain the target flow rate, aiming for a pool that’s both energy efficient and operationally efficient. That means better circulation, more consistent chemical distribution, and fewer surprise problems that show up when flow drops over time.
We also get practical on features pool pros will appreciate: app-based monitoring in the Blue Sync app, a dirty filter warning tied to sustained RPM increases, boost mode for bather load or rough weather, and upcoming heater control through a two-wire fireman switch with flow settings that help protect gas heaters and optimize heat pumps. We wrap with what went into testing, American manufacturing and support, and how the pump lines up with common installs so replacement work is simpler.
If this helps you think differently about variable speed pumps, subscribe, share the episode with a pool pro friend, and leave a quick review so more people can find it.
We talk with Sean McDermott from H2 Flow Controls about the Nautilus VSF variable speed pump and why measuring real flow beats guessing RPM. We explain how constant-flow control can improve circulation, protect equipment, and reduce the pool problems that show up when conditions change.
• the business case for launching a new VS pump in a crowded pool equipment market
• constant flow vs fixed RPM settings and why pump curves and head calculations often miss reality
• adaptive flow setup using pool gallons and either constant flow mode or turnover mode
• automatic adjustment as filters load up, water features change, and systems drift over time
• water quality benefits of steady circulation for chemical dispersion and salt systems
• Blue Sync app monitoring plus a dirty filter warning based on sustained RPM increase
• boost mode to handle sun, rain, heavy use, and seasonal debris
• heater control using a two-wire fireman switch with heater-safe flow settings
• scheduling support for in-floor cleaning systems
• made-in-the-USA development and faster support through in-house assembly and R&D
• installation fitment notes matching common pump footprints and the available horsepower models
To learn more about the Nautus VSF Pump, go to h2flow.net. You can also hear more podcasts by going to swimmingpoollearning.com. If you're interested in my coaching program, you can learn more at PoolGuyCoaching.com.
Send us Fan Mail (buzzsprout.com/110832/fan_mail/new)
Support the Pool Guy Podcast Show Sponsors!
HASA REWARDS App
hasa.com/hasa-app
The Bottom Feeder. Save $100 with Code: DVB100
store.thebottomfeeder.com
Try Skimmer FREE for 30 days:
getskimmer.com/poolguy
Get UPA Liability Insurance $64 a month! https://forms.gle/F9YoTWNQ8WnvT4QBA
Support the show (buzzsprout.com/110832/support)
Thanks for listening, and I hope you find the Podcast helpful! For other free resources to further help you:
Visit my Website: swimmingpoollearning.com
Watch on YouTube: youtube.com/@SPL
Podcast Site: the-pool-guy-podcast-show.onpodium.com
UPA General Liability Insurance Application: https://forms.gle/F9YoTWNQ8WnvT4QBA
Pool Guy Coaching Group
Join an exclusive network of Pool Service Technicians to access the industry’s leading commercial general liability insurance program. Protect your business.
Premium is $64 per month per member (additional $40 for employees and ICs)
$59 per month for Pool Guy coaching Members - join here! patreon.com/poolguycoaching
Limits are $1,000,000 in occurrence and $2,000,000 in the aggregate - Per member limits
[ $1,000,000 per occurrence and $4,000,000 aggregate available for $75 per month ]
$50,000 in HazMat Coverage - clean up on-site or over-the-road
Acid Wash Coverage - Full Limits
Your pool doesn’t care what RPM your pump runs at. It cares about flow. And most of the headaches we see as pool owners and pool service pros start when circulation quietly drifts away from what the pool actually needs. I sit down with Sean McDermott, Executive Vice President at H2 Flow Controls, to unpack the Nautilus VSF variable speed pool pump and the idea behind it: stop guessing speeds and start controlling real, measured gallons per minute.
We dig into adaptive flow, including constant flow mode and turnover mode, and why “set it and forget it” RPM schedules often fall apart as filters get dirty, plumbing conditions change, and water features or in-floor systems cycle on and off. Sean explains how the pump adjusts automatically to maintain the target flow rate, aiming for a pool that’s both energy efficient and operationally efficient. That means better circulation, more consistent chemical distribution, and fewer surprise problems that show up when flow drops over time.
We also get practical on features pool pros will appreciate: app-based monitoring in the Blue Sync app, a dirty filter warning tied to sustained RPM increases, boost mode for bather load or rough weather, and upcoming heater control through a two-wire fireman switch with flow settings that help protect gas heaters and optimize heat pumps. We wrap with what went into testing, American manufacturing and support, and how the pump lines up with common installs so replacement work is simpler.
If this helps you think differently about variable speed pumps, subscribe, share the episode with a pool pro friend, and leave a quick review so more people can find it.
We talk with Sean McDermott from H2 Flow Controls about the Nautilus VSF variable speed pump and why measuring real flow beats guessing RPM. We explain how constant-flow control can improve circulation, protect equipment, and reduce the pool problems that show up when conditions change.
• the business case for launching a new VS pump in a crowded pool equipment market
• constant flow vs fixed RPM settings and why pump curves and head calculations often miss reality
• adaptive flow setup using pool gallons and either constant flow mode or turnover mode
• automatic adjustment as filters load up, water features change, and systems drift over time
• water quality benefits of steady circulation for chemical dispersion and salt systems
• Blue Sync app monitoring plus a dirty filter warning based on sustained RPM increase
• boost mode to handle sun, rain, heavy use, and seasonal debris
• heater control using a two-wire fireman switch with heater-safe flow settings
• scheduling support for in-floor cleaning systems
• made-in-the-USA development and faster support through in-house assembly and R&D
• installation fitment notes matching common pump footprints and the available horsepower models
To learn more about the Nautus VSF Pump, go to h2flow.net. You can also hear more podcasts by going to swimmingpoollearning.com. If you're interested in my coaching program, you can learn more at PoolGuyCoaching.com.
Send us Fan Mail (buzzsprout.com/110832/fan_mail/new)
Support the Pool Guy Podcast Show Sponsors!
HASA REWARDS App
hasa.com/hasa-app
The Bottom Feeder. Save $100 with Code: DVB100
store.thebottomfeeder.com
Try Skimmer FREE for 30 days:
getskimmer.com/poolguy
Get UPA Liability Insurance $64 a month! https://forms.gle/F9YoTWNQ8WnvT4QBA
Support the show (buzzsprout.com/110832/support)
Thanks for listening, and I hope you find the Podcast helpful! For other free resources to further help you:
Visit my Website: swimmingpoollearning.com
Watch on YouTube: youtube.com/@SPL
Podcast Site: the-pool-guy-podcast-show.onpodium.com
UPA General Liability Insurance Application: https://forms.gle/F9YoTWNQ8WnvT4QBA
Pool Guy Coaching Group
Join an exclusive network of Pool Service Technicians to access the industry’s leading commercial general liability insurance program. Protect your business.
Premium is $64 per month per member (additional $40 for employees and ICs)
$59 per month for Pool Guy coaching Members - join here! patreon.com/poolguycoaching
Limits are $1,000,000 in occurrence and $2,000,000 in the aggregate - Per member limits
[ $1,000,000 per occurrence and $4,000,000 aggregate available for $75 per month ]
$50,000 in HazMat Coverage - clean up on-site or over-the-road
Acid Wash Coverage - Full Limits

![Salt Cell Problems? Here’s What’s REALLY Going On
Your saltwater pool can look perfect on the surface while the sanitizer quietly drops to zero, and when that happens most people blame the salt level. I go straight to the real weak link: the salt chlorine generator cell. After 35 years in the pool industry, I’ve seen the same failure patterns repeat, from undersized cells that can’t keep up in summer to perfectly sized systems that still lose the fight because the pump isn’t running long enough.
We unpack why salt cells are expensive (titanium plates coated with ruthenium or iridium), why “bigger cell = longer life” isn’t as guaranteed as it used to be, and why I still prefer a higher gallon-rated cell for practical chlorine production headroom.
From there, it’s the stuff that actually trips up saltwater pool maintenance: cyanuric acid targets (including why many pros like about 80 ppm CYA for salt pools), phosphates and algae burning through chlorine, calcium scale blocking conductivity, and the cleaning mistakes that strip coatings and shorten cell life. We also cover cell lifespan (often about 10,000 hours), how to check remaining life, why a dying cell can throw false low-salt readings, and why adding more salt can create an even bigger problem.
• why I still like an oversized salt cell for production headroom
• chlorine output benchmarks for common Pentair IC and Hayward T-Cell models
• how pump runtime and output percentage control real-world chlorine production
• why algae, cloudiness, phosphates, and low CYA can overwhelm a salt system
• why many pros target about 80 ppm cyanuric acid for saltwater pools
• calcium buildup on plates and how it blocks conductivity
• Hayward AquaRite 90-day inspect cell reminder and how it can mislead
• safe salt cell cleaning and how too much muriatic acid ruins coatings
• typical salt cell lifespan in hours and what that means in years
• signs a cell is dying including false low salt readings
• why adding salt does not fix a dying cell and can oversalt the pool
• white flake blowback vs mushy flakes and what to try for each
• cooldown run strategy to reduce flakes after a hot run cycle
Send us Fan Mail (https://www.buzzsprout.com/110832/fan_mail/new)
Support the Pool Guy Podcast Show Sponsors!
HASA REWARDS App
https://hasa.com/hasa-app
The Bottom Feeder. Save $100 with Code: DVB100
https://store.thebottomfeeder.com/
Try Skimmer FREE for 30 days:
https://getskimmer.com/poolguy
Get UPA Liability Insurance $64 a month! https://forms.gle/F9YoTWNQ8WnvT4QBA
Support the show (https://www.buzzsprout.com/110832/support)
Thanks for listening, and I hope you find the Podcast helpful! For other free resources to further help you:
Visit my Website: https://www.swimmingpoollearning.com
Watch on YouTube: https://www.youtube.com/@SPL
Podcast Site: https://the-pool-guy-podcast-show.onpodium.com/
UPA General Liability Insurance Application: https://forms.gle/F9YoTWNQ8WnvT4QBA
Pool Guy Coaching Group
Join an exclusive network of Pool Service Technicians to access the industry’s leading commercial general liability insurance program. Protect your business.
Premium is $64 per month per member (additional $40 for employees and ICs)
$59 per month for Pool Guy coaching Members - join here! https://www.patreon.com/poolguycoaching
Limits are $1,000,000 in occurrence and $2,000,000 in the aggregate - Per member limits
[ $1,000,000 per occurrence and $4,000,000 aggregate available for $75 per month ]
$50,000 in HazMat Coverage - clean up on-site or over-the-road
Acid Wash Coverage - Full Limits Salt Cell Problems? Here’s What’s REALLY Going On](https://i.ytimg.com/vi/HI1Zkpj5g0s/mqdefault.jpg)



![How To Keep Airbnb Hot Tubs Safe Between Guests
Airbnb quietly made a big operational change: starting November 20, hosts can’t require guests to do physical “checkout chores.” That means no more relying on renters to cover the hot tub, test strips, reset spa mode, or handle any hands-on pool tasks. For pool service pros and vacation rental managers, this flips the script, because the pool and spa now need a tighter, more professional service plan to stay safe, clear, and review-proof.
We walk through what heavy bather load really does to a short-term rental hot tub and why basic weekly service often isn’t enough. We talk practical sanitation strategies including Frog mineral systems, bromine tablet setups, saltwater generators, ozone and UV add-ons, and why liquid chlorine remains one of the fastest ways to shock and recover water between guests. We also get honest about the ugly realities: foam, sunscreen oils, and that moment when the water is “toast” and draining is the smartest move.
Then we zoom into operations and pricing. Check-in and check-out timing can force extra trips, weekend calls, and fast turnarounds that feel more like commercial pool service than residential. We share ballpark per-visit rates, when to charge more, and how to speed things up with submersible pumps and filter swap strategies so you’re not stuck on-site burning your day.
If you service Airbnb pools or want to, hit play, share this with a pool pro friend, and leave a review if it helps. What’s the hardest part of short-term rental pool and hot tub maintenance in your area?
Airbnb quietly made a big operational change: starting November 20, hosts can’t require guests to do physical “checkout chores.” That means no more relying on renters to cover the hot tub, test strips, reset spa mode, or handle any hands-on pool tasks. For pool service pros and vacation rental managers, this flips the script, because the pool and spa now need a tighter, more professional service plan to stay safe, clear, and review-proof.
We walk through what heavy bather load really does to a short-term rental hot tub and why basic weekly service often isn’t enough. We talk practical sanitation strategies including Frog mineral systems, bromine tablet setups, saltwater generators, ozone and UV add-ons, and why liquid chlorine remains one of the fastest ways to shock and recover water between guests. We also get honest about the ugly realities: foam, sunscreen oils, and that moment when the water is “toast” and draining is the smartest move.
Then we zoom into operations and pricing. Check-in and check-out timing can force extra trips, weekend calls, and fast turnarounds that feel more like commercial pool service than residential. We share ballpark per-visit rates, when to charge more, and how to speed things up with submersible pumps and filter swap strategies so you’re not stuck on-site burning your day.
If you service Airbnb pools or want to, hit play, share this with a pool pro friend, and leave a review if it helps. What’s the hardest part of short-term rental pool and hot tub maintenance in your area?
Send us Fan Mail (https://www.buzzsprout.com/110832/fan_mail/new)
Support the Pool Guy Podcast Show Sponsors!
HASA REWARDS App
https://hasa.com/hasa-app
The Bottom Feeder. Save $100 with Code: DVB100
https://store.thebottomfeeder.com/
Try Skimmer FREE for 30 days:
https://getskimmer.com/poolguy
Get UPA Liability Insurance $64 a month! https://forms.gle/F9YoTWNQ8WnvT4QBA
Support the show (https://www.buzzsprout.com/110832/support)
Thanks for listening, and I hope you find the Podcast helpful! For other free resources to further help you:
Visit my Website: https://www.swimmingpoollearning.com
Watch on YouTube: https://www.youtube.com/@SPL
Podcast Site: https://the-pool-guy-podcast-show.onpodium.com/
UPA General Liability Insurance Application: https://forms.gle/F9YoTWNQ8WnvT4QBA
Pool Guy Coaching Group
Join an exclusive network of Pool Service Technicians to access the industry’s leading commercial general liability insurance program. Protect your business.
Premium is $64 per month per member (additional $40 for employees and ICs)
$59 per month for Pool Guy coaching Members - join here! https://www.patreon.com/poolguycoaching
Limits are $1,000,000 in occurrence and $2,000,000 in the aggregate - Per member limits
[ $1,000,000 per occurrence and $4,000,000 aggregate available for $75 per month ]
$50,000 in HazMat Coverage - clean up on-site or over-the-road
Acid Wash Coverage - Full Limits How To Keep Airbnb Hot Tubs Safe Between Guests](https://i.ytimg.com/vi/IzrJh5VGd8w/mqdefault.jpg)
![Avoid Liability on Your Pool Start-Ups
Brand new plaster looks perfect for about five minutes, then reality hits: dust, rising pH, builder timelines, and a homeowner who expects the finish to stay flawless forever. We walk through how we approach a new plaster pool startup using a traditional startup method that is easier to execute, easier to explain, and far easier to defend if anyone tries to pin plaster defects on the startup tech later.
We point you to practical resources from the National Plasterers Council, including the NPC startup card and the option to take a startup technician certification course. Then we get into the day-one mindset that keeps you out of trouble: show up as close to fill day as possible, never let the water stop mid-fill, and document everything before you touch the pool. We talk about what “normal” plaster variation can look like, why lighting changes your inspection, and how photos plus written notes protect you when discoloration or mottling becomes a warranty argument.
From there we dig into the core water chemistry fundamentals for new plaster pools: tracking pH, total alkalinity, calcium hardness, metals, and keeping an eye on LSI during the first 28 days. We cover why fresh plaster creates heavy acid demand, how to think about alkalinity targets, and how brushing twice daily with a nylon brush helps manage plaster dust. We also flag common early mistakes like wheeled vacuums, stainless steel brushing, auto cleaners, and adding salt too soon.
If you want more startup wins with fewer headaches, subscribe, share this with a pool pro who does startups, and leave a review with your best day-one documentation tip.
We break down how to do a new plaster pool startup with fewer surprises and less liability by sticking to a traditional, step-by-step method. We also explain why documentation, photos, and consistent chemistry logs are the difference between getting blamed and being protected when plaster issues show up later.
• why many pool pros avoid startups and where the risk really comes from
• using National Plasterers Council resources, the NPC startup card, and certification training
• traditional startup vs acid or hot startup and why traditional is easier to defend
• documenting plaster appearance, lighting effects, and pre-existing conditions
• logging pH, alkalinity, calcium hardness, metals, and every chemical addition
• keeping alkalinity in a safe range and managing pH rise from fresh plaster
• dealing with plaster dust and when additives or sequestrants can help
• fill day rules like never stopping the water mid-fill
• brushing twice daily and avoiding wheeled vacuums, stainless brushes, auto cleaners, and salt early
• how disputes usually play out and why records matter even years later
Join the pool guy coaching program. Learn more at swimmingpoollearning.com.
If you want this, I can send this to you. Just email me at David at Swimmingpoollearning.com.
Send us Fan Mail (https://www.buzzsprout.com/110832/fan_mail/new)
Support the Pool Guy Podcast Show Sponsors!
HASA REWARDS App
https://hasa.com/hasa-app
The Bottom Feeder. Save $100 with Code: DVB100
https://store.thebottomfeeder.com/
Try Skimmer FREE for 30 days:
https://getskimmer.com/poolguy
Get UPA Liability Insurance $64 a month! https://forms.gle/F9YoTWNQ8WnvT4QBA
Support the show (https://www.buzzsprout.com/110832/support)
Thanks for listening, and I hope you find the Podcast helpful! For other free resources to further help you:
Visit my Website: https://www.swimmingpoollearning.com
Watch on YouTube: https://www.youtube.com/@SPL
Podcast Site: https://the-pool-guy-podcast-show.onpodium.com/
UPA General Liability Insurance Application: https://forms.gle/F9YoTWNQ8WnvT4QBA
Pool Guy Coaching Group
Join an exclusive network of Pool Service Technicians to access the industry’s leading commercial general liability insurance program. Protect your business.
Premium is $64 per month per member (additional $40 for employees and ICs)
$59 per month for Pool Guy coaching Members - join here! https://www.patreon.com/poolguycoaching
Limits are $1,000,000 in occurrence and $2,000,000 in the aggregate - Per member limits
[ $1,000,000 per occurrence and $4,000,000 aggregate available for $75 per month ]
$50,000 in HazMat Coverage - clean up on-site or over-the-road
Acid Wash Coverage - Full Limits Avoid Liability on Your Pool Start-Ups](https://i.ytimg.com/vi/JBq6EmYMpnk/mqdefault.jpg)
![Cal Hypo Tablets in Real Pool Situations
High cyanuric acid can turn a perfectly maintained pool into a weekly battle where chlorine “won’t hold” and algae feels one step away. I walk through a practical option many pool pros consider when CYA gets out of control: switching from trichlor tablets to cal hypo tablets. The promise is simple, no more stabilizer added with every tablet, but the decision is not as clean as it sounds.
We dig into the real chemistry behind both products. Trichlor’s convenience comes with a built-in byproduct that keeps stacking, while cal hypo avoids CYA but adds calcium hardness and tends to push pH up, which can increase muriatic acid use. I also explain why dosing is not one-for-one: cal hypo tablets are typically lower in available chlorine than trichlor, so you often need more tablets to maintain the same free chlorine level, and that can make the seasonal cost noticeably higher.
Then we get into the “field” problems that determine whether cal hypo works for your route or your backyard pool. Safety is critical: cal hypo and trichlor cannot be used in the same feeder. I also cover why hot-water regions can burn through cal hypo tablets in a day or two, leaving you with no slow-release sanitizer for the rest of the week, plus the current state of cal hypo feeders and floaters.
If you’re deciding between draining, staying on trichlor, switching to cal hypo, or blending tablets with liquid chlorine, this gives you a clear way to do the math and avoid surprises. Subscribe for more pool chemistry and service strategies, share this with a pool owner who’s fighting high CYA, and leave a review with the biggest water balance problem you want solved next.
• why trichlor tablets drive cyanuric acid higher than most people expect
• when cal hypo tablets make sense for high CYA pools
• why you must never mix cal hypo with trichlor feeders
• skimmer use versus dedicated cal hypo feeders and why flow matters
• why hot climates can dissolve cal hypo too fast for weekly service
• available chlorine differences and why dosing is not one-for-one
• cost realities plus added calcium hardness and higher pH
• why partial drains may still be needed with any approach
Send us Fan Mail (https://www.buzzsprout.com/110832/fan_mail/new)
Support the Pool Guy Podcast Show Sponsors!
HASA REWARDS App
https://hasa.com/hasa-app
The Bottom Feeder. Save $100 with Code: DVB100
https://store.thebottomfeeder.com/
Try Skimmer FREE for 30 days:
https://getskimmer.com/poolguy
Get UPA Liability Insurance $64 a month! https://forms.gle/F9YoTWNQ8WnvT4QBA
Support the show (https://www.buzzsprout.com/110832/support)
Thanks for listening, and I hope you find the Podcast helpful! For other free resources to further help you:
Visit my Website: https://www.swimmingpoollearning.com
Watch on YouTube: https://www.youtube.com/@SPL
Podcast Site: https://the-pool-guy-podcast-show.onpodium.com/
UPA General Liability Insurance Application: https://forms.gle/F9YoTWNQ8WnvT4QBA
Pool Guy Coaching Group
Join an exclusive network of Pool Service Technicians to access the industry’s leading commercial general liability insurance program. Protect your business.
Premium is $64 per month per member (additional $40 for employees and ICs)
$59 per month for Pool Guy coaching Members - join here! https://www.patreon.com/poolguycoaching
Limits are $1,000,000 in occurrence and $2,000,000 in the aggregate - Per member limits
[ $1,000,000 per occurrence and $4,000,000 aggregate available for $75 per month ]
$50,000 in HazMat Coverage - clean up on-site or over-the-road
Acid Wash Coverage - Full Limits Cal Hypo Tablets in Real Pool Situations](https://i.ytimg.com/vi/K2iMBJ-eq7Q/mqdefault.jpg)
![Pool Products That Died — And Why
One day a pool product feels like the future. The next day the app is gone, support is gone, and what you paid for becomes a paperweight floating in the deep end. We dig into the real-world side of pool industry acquisitions and “disappearing” brands, including what happens when big companies buy promising pool technology and the execution doesn’t match the hype.
We walk through Hayward’s Fin smart pool monitor and why the marketing and user experience created problems for homeowners and pool service professionals alike. ORP and pH readings can be useful, but confusing “unsafe water” alerts, a recurring subscription, and a hard shutdown of app service can destroy trust fast. From there, we compare Sutro’s more complete reagent-based pool water monitoring approach, then zoom in on the practical hurdles that can sink any smart pool monitor: cartridge logistics, calibration time, price point, and the brutal reality of pool seasonality in colder regions.
Not every story is a loss. We talk about pool products that simply vanished despite working well, like the Skim Doctor 2.0, and how solar skimmers like Solar Breeze evolved into Ariel and related models while facing heavy competition. Then we get into acquisitions that reshaped the market, including the CMP salt cell system being effectively discontinued, versus buyouts that preserve goodwill, like Pentair keeping Pleatco alive and Fluidra leaving Taylor test kits largely intact.
If you’ve ever wondered which pool brands survive, why great products get killed, and what that means for your pool route or your backyard, this conversation is for you. Subscribe, share the episode with a pool pro friend, and leave a review with the smartest pool product you’ve ever used.
We break down pool industry buyouts and product failures that leave pool owners and pool pros stuck with discontinued gear and dead apps. We also highlight the acquisitions that keep brands intact and protect customer trust.
• Hayward’s Fin smart monitor, ORP confusion, subscription pain, and a shutdown that strands users
• Why smart pool monitors still struggle to replace proper water testing
• Sutro’s stronger readings with reagent cartridges, calibration time, and seasonal subscription problems
• The Crystal Water Monitor as a more robust evolution of the Fin concept
• Skim Doctor 2.0 as a rare skimmer add-on that worked but disappeared
• Solar Breeze, Ariel, Skimbot, and how competition and implementation shape survival
• Fluidra buying CMP salt cells then effectively discontinuing the full system
• Pentair and Pleatco as a model for keeping a brand alive
• Fluidra and Taylor test kits, what changes and what stays the same
Learn more at swimmingpoollearning.com.
If youre interested in the coaching program that I offer, you can learn more at PoolGuyCoaching.com.
Send us Fan Mail (https://www.buzzsprout.com/110832/fan_mail/new)
Support the Pool Guy Podcast Show Sponsors!
HASA REWARDS App
https://hasa.com/hasa-app
The Bottom Feeder. Save $100 with Code: DVB100
https://store.thebottomfeeder.com/
Try Skimmer FREE for 30 days:
https://getskimmer.com/poolguy
Get UPA Liability Insurance $64 a month! https://forms.gle/F9YoTWNQ8WnvT4QBA
Support the show (https://www.buzzsprout.com/110832/support)
Thanks for listening, and I hope you find the Podcast helpful! For other free resources to further help you:
Visit my Website: https://www.swimmingpoollearning.com
Watch on YouTube: https://www.youtube.com/@SPL
Podcast Site: https://the-pool-guy-podcast-show.onpodium.com/
UPA General Liability Insurance Application: https://forms.gle/F9YoTWNQ8WnvT4QBA
Pool Guy Coaching Group
Join an exclusive network of Pool Service Technicians to access the industry’s leading commercial general liability insurance program. Protect your business.
Premium is $64 per month per member (additional $40 for employees and ICs)
$59 per month for Pool Guy coaching Members - join here! https://www.patreon.com/poolguycoaching
Limits are $1,000,000 in occurrence and $2,000,000 in the aggregate - Per member limits
[ $1,000,000 per occurrence and $4,000,000 aggregate available for $75 per month ]
$50,000 in HazMat Coverage - clean up on-site or over-the-road
Acid Wash Coverage - Full Limits Pool Products That Died — And Why](https://i.ytimg.com/vi/KHHzPUx7bmE/mqdefault.jpg)
![Bigger Is Better? Salt Cell Sizing Explained
Salt systems are supposed to make pool care easier, so why do so many owners end up stuck at 100% output, watching pH climb, and dreading the next replacement salt cell bill? We walk through how to pick the right size salt cell for your pool so your saltwater chlorine generator can maintain steady free chlorine without overworking the equipment or creating water balance headaches.
We also get real about what’s changed: plenty of today’s salt cells do not seem to hit their rated 10,000 to 15,000 hours, and replacement costs for some major brands have skyrocketed. That shifts the usual “just buy the biggest cell” strategy. We compare practical options for common pool sizes, including a detailed 15,000-gallon pool example, and explain why slightly oversizing can still help when it lets you run a lower percentage and keep room for quick superchlorination before heavy bather loads.
Along the way, we cover brand considerations like Jandy TrueClear, Hayward T-Cell sizing, Pentair automation compatibility, and why warranties like Circuit Pool’s prorated coverage can matter more than marketing numbers. We also simplify chlorine production math so you size for what your pool actually loses each day, not an unrealistic maximum output.
If this helped, subscribe for more pool service tips, share it with a pool owner who’s shopping for a salt system, and leave a quick review so more people can find the show.
We break down how to choose the right size salt cell so your pool stays chlorinated without living at 100% output or fighting constant side effects. We also talk honestly about modern salt cell lifespan, replacement cost, and why planning for the next cell matters as much as buying the system today.
• why our old “oversize it” advice changes as cells fail sooner than rated hours
• why running 100% output can drive pH up fast
• what white flake blowback looks like and why high output can increase the risk
• practical sizing for a 15,000-gallon pool using real chlorine production numbers
• brand-by-brand considerations including Jandy TrueClear, Hayward T-Cells, Pentair pricing
• why Circuit Pool’s prorated warranty stands out for long-term value
• how to think about chlorine loss per day instead of chasing huge production
Learn more at Swimmipoollearning.com.
If youre interested in the coaching program that I offer, you can learn more at poolguidecoaching.com.
Send us Fan Mail (https://www.buzzsprout.com/110832/fan_mail/new)
Support the Pool Guy Podcast Show Sponsors!
HASA REWARDS App
https://hasa.com/hasa-app
The Bottom Feeder. Save $100 with Code: DVB100
https://store.thebottomfeeder.com/
Try Skimmer FREE for 30 days:
https://getskimmer.com/poolguy
Get UPA Liability Insurance $64 a month! https://forms.gle/F9YoTWNQ8WnvT4QBA
Support the show (https://www.buzzsprout.com/110832/support)
Thanks for listening, and I hope you find the Podcast helpful! For other free resources to further help you:
Visit my Website: https://www.swimmingpoollearning.com
Watch on YouTube: https://www.youtube.com/@SPL
Podcast Site: https://the-pool-guy-podcast-show.onpodium.com/
UPA General Liability Insurance Application: https://forms.gle/F9YoTWNQ8WnvT4QBA
Pool Guy Coaching Group
Join an exclusive network of Pool Service Technicians to access the industry’s leading commercial general liability insurance program. Protect your business.
Premium is $64 per month per member (additional $40 for employees and ICs)
$59 per month for Pool Guy coaching Members - join here! https://www.patreon.com/poolguycoaching
Limits are $1,000,000 in occurrence and $2,000,000 in the aggregate - Per member limits
[ $1,000,000 per occurrence and $4,000,000 aggregate available for $75 per month ]
$50,000 in HazMat Coverage - clean up on-site or over-the-road
Acid Wash Coverage - Full Limits Bigger Is Better? Salt Cell Sizing Explained](https://i.ytimg.com/vi/KWd07UbvgxI/mqdefault.jpg)
![Which Pool Test Kit Should You Buy?
Bad pool chemistry rarely starts with “bad chemicals.” It usually starts with bad testing, rushed testing, or the wrong tool for the job. We break down the most common pool water testing options and explain how to choose a pool test kit that fits your reality, whether you’re a homeowner checking water once a week or a pool service pro trying to move fast on a packed route.
We compare reagent test kits as the daily driver for pool maintenance and explain what you should be measuring every time: free chlorine, pH, total alkalinity, calcium hardness, and cyanuric acid. Then we get specific about the industry standards, including the Taylor K-2005 and the Taylor FAS-DPD K-2006, and why the difference between dye and powder testing can matter more for speed than most people think. We also talk about the popular Poolmaster 5-way kit, the temptation of “flash testing,” and why quick shortcuts can produce wildly unreliable readings.
From there, we move into digital pool photometers and what you gain with tablets, longer shelf life, and a clear digital readout. We cover options like the LaMotte ColorQ 2X Pro line, why metals testing like copper and iron can be a game changer, and what to know about alternatives such as the PoolLab 2.0 and ITS style strip based photometers. Finally, we zoom out to the full spectrum, from affordable pool test strips for fast ballpark checks to the high end LaMotte Spin Touch system when you want maximum accuracy and don’t mind the cost.
If this helped you think differently about pool water testing, subscribe for more practical pool care advice, share the episode with a pool owner or tech who still guesses at colors, and leave a review so more people can find the show.
We walk through the real world choices for pool water testing, from budget test strips to pro grade reagent kits and high accuracy digital photometers. We share what we use for speed on a pool route, what we recommend for homeowners, and where accuracy is worth paying for.
• The core chemistry targets to test: free chlorine, pH, total alkalinity, calcium hardness, cyanuric acid
• Why reagent test kits stay the fastest, most affordable daily option
• Taylor K-2005 vs Taylor FAS-DPD K-2006, including speed and chlorine range differences
• Poolmaster 5-way kit strengths and what you give up versus Taylor
• Why flash testing looks easy but fails in accuracy
• OTO safety concerns and why gloves matter
• Photometers explained: tablets, shelf life, digital readout, accuracy versus time
• LaMotte ColorQ 2X Pro 7 vs Pro 9 and why metals testing can matter
• Other photometer options, including PoolLab 2.0 and ITS strip based digital readers
• LaMotte Spin Touch as a premium testing system and the ongoing disc cost
• When pool test strips are “good enough” and where they fall short
Learn more at swimmingpoollearning.com.
If youre interested in the coaching program that I offer, you can learn more at poolguidecoaching.com.
Send us Fan Mail (https://www.buzzsprout.com/110832/fan_mail/new)
Support the Pool Guy Podcast Show Sponsors!
HASA REWARDS App
https://hasa.com/hasa-app
The Bottom Feeder. Save $100 with Code: DVB100
https://store.thebottomfeeder.com/
Try Skimmer FREE for 30 days:
https://getskimmer.com/poolguy
Get UPA Liability Insurance $64 a month! https://forms.gle/F9YoTWNQ8WnvT4QBA
Support the show (https://www.buzzsprout.com/110832/support)
Thanks for listening, and I hope you find the Podcast helpful! For other free resources to further help you:
Visit my Website: https://www.swimmingpoollearning.com
Watch on YouTube: https://www.youtube.com/@SPL
Podcast Site: https://the-pool-guy-podcast-show.onpodium.com/
UPA General Liability Insurance Application: https://forms.gle/F9YoTWNQ8WnvT4QBA
Pool Guy Coaching Group
Join an exclusive network of Pool Service Technicians to access the industry’s leading commercial general liability insurance program. Protect your business.
Premium is $64 per month per member (additional $40 for employees and ICs)
$59 per month for Pool Guy coaching Members - join here! https://www.patreon.com/poolguycoaching
Limits are $1,000,000 in occurrence and $2,000,000 in the aggregate - Per member limits
[ $1,000,000 per occurrence and $4,000,000 aggregate available for $75 per month ]
$50,000 in HazMat Coverage - clean up on-site or over-the-road
Acid Wash Coverage - Full Limits Which Pool Test Kit Should You Buy?](https://i.ytimg.com/vi/KccTfvNG5qc/mqdefault.jpg)