NASAs System for In-situ Defect Detection in Composites During Cure Webinar @NASATechTransfer
NASAs System for In-situ Defect Detection in Composites During Cure Webinar  @NASATechTransfer
Uploaded August 2020 | Updated November 2026, 1 hour ago
Innovators at the NASA Langley Research Center, in collaboration with Analytical Mechanics Associates, have developed an automated ultrasonic scanning system for in-situ cure monitoring and defect detection of composites in an autoclave or an oven.

This inspection system is based on an ultrasonic scanner that operates inside an autoclave using active cooling of the temperature-sensitive electronics. The system continually scans for any defects that may form in composites during the cure process and tracks movement of defects originating during layup or cure. Typically, non-destructive evaluation of composites, by ultrasound or other means, is conducted either before or after the cure process, but many defects form and evolve during cure.

NASA's in-situ cure monitoring system, by contrast, provides real-time knowledge of defect (e.g., porosity) location and quantity during cure. This offers a better understanding of defect sources and sinks, accurate validation of process models for the prediction of cure defects, and the ability to control processing parameters during cure based on real-time measurements. These benefits result in more efficient process development, shortened certification time, reduction in off-spec parts, and increased production throughput.

Besides aerospace applications, the system can be useful in any application where composite structures are utilized, such as automotive components, marine structures, high speed rail sections, wind turbine blades, and many more.


During the webinar, you will learn how NASA’s technologies and capabilities are available to industry and other organizations through NASA’s Technology Transfer Program.


For more information on the technology, please visit technology.nasa.gov/patent/LAR-TOPS-327
NASAs System for In-situ Defect Detection in Composites During Cure WebinarNASAs Composite Joint ConnectorNASA is offering more free, downloadable software programs!More NASA Software is ready for download...for free!NASA’s Luminescence-Based Temperature Mapping and Sensing System WebinarNASAs Contaminant Resistant Coatings for Extreme EnvironmentsNASAs Shape Memory Alloy Tubular Structure WebinarNASAs Interoperable Intelligent ControllersNASAs Space Suit RoboGlove WebinarNASAs Fluid Structure Coupling TechnologyStartup NASA Feature Series: Elementum 3DStartup NASA Feature Series: Linc Research, Inc.
NASA Technology Transfer Program |

NASA's System for In-situ Defect Detection in Composites During Cure Webinar

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER