Uploaded May 2024 | Updated November 2026, 3 hours ago
I recently got to test my theory that mylar balloons look the same as seen from above than seen from below- as I usually see them. All things considered, it turned out I was right. The mylars reflected the heat of the surroundings like floating mirrors.
This was a midday test, so obviously the surroundings are going to be different at night. It should be considered that the auto gain-level features of the FLIR compensate for this change in thermal range and adjusts accordingly. There would still be gradients of heat reflected from the mylar, but on a different scale compared to what is seen during the day. In essence, the sensitivity kicks up to adapt to the difference.
I recently got to test my theory that mylar balloons look the same as seen from above than seen from below- as I usually see them. All things considered, it turned out I was right. The mylars reflected the heat of the surroundings like floating mirrors.
This was a midday test, so obviously the surroundings are going to be different at night. It should be considered that the auto gain-level features of the FLIR compensate for this change in thermal range and adjusts accordingly. There would still be gradients of heat reflected from the mylar, but on a different scale compared to what is seen during the day. In essence, the sensitivity kicks up to adapt to the difference.










