Uploaded January 2026 | Updated September 2026, 13 hours ago
I was having some issues with my CNC mill, what fixed it? Lets then get on with the lathe tool holders. Thanks for all the inputs and feedback on how to trouble shoot it.
____________________
My TIG 200P ACDC was supplied by Arc Captain.
If you are on the fence on a new welder, now is the time, as Arc Captain has great anniversary offers.
If use this link to purchase from them, and you will receive a discount, and a small portion of the profit will flow to help support the channel an no cost to you. Thank you.
arccaptain.com/?ref=rotarysmp
____________________
If you enjoy my content and would like to support my channel... I'd really appreciate it.
Please join me on Patreon and help build this community.
patreon.com/RotarySMP
or sign up for youtube memberships using the "JOIN" button above.
or please just buy me a coffee...
tinyurl.com/5cv2yscb
____________________
Check out Johan's Maho retrofit.
youtube.com/watch?v=8Cov5BcOcjk
____________________
00:00 - Intro
01:00 - What is wrong with the Maho CNC MIll?
01:36 - What is a following error?
03:13 - Why not rip out all the old electrical control hardware?
04:53 - Viewer suggestions.
05:58 - Trouble shooting
06:03 - 1/ Contactor issues.
06:05 - Open up the following error allowance
06:42 - contactor noise
08:48 - Fixing a design error I made during conversion.
11:48 - 2/ Indramat servo driver issues
13:08 - 3/ Motor brushes.
13:31 - 4/ Lubrication issues
15:17 - 5/ Heidenhain glass scale encoders?
15:43 - 6/ Servo tuning and allowable following error limit?⁄
16:24 - Testing
17:28 - What was root cause?
19:14 - Back in production
22:54 - Welding up a screw up.
26:13 - Milling out the dovetail slots.
28:45 - Our #1 fan - Nico!
30:18 - Facing tool holders.
____________________
Music:
Amit Sagie - Self Evolution
Roger Rivas - Live with Dub
I was having some issues with my CNC mill, what fixed it? Lets then get on with the lathe tool holders. Thanks for all the inputs and feedback on how to trouble shoot it.
____________________
My TIG 200P ACDC was supplied by Arc Captain.
If you are on the fence on a new welder, now is the time, as Arc Captain has great anniversary offers.
If use this link to purchase from them, and you will receive a discount, and a small portion of the profit will flow to help support the channel an no cost to you. Thank you.
arccaptain.com/?ref=rotarysmp
____________________
If you enjoy my content and would like to support my channel... I'd really appreciate it.
Please join me on Patreon and help build this community.
patreon.com/RotarySMP
or sign up for youtube memberships using the "JOIN" button above.
or please just buy me a coffee...
tinyurl.com/5cv2yscb
____________________
Check out Johan's Maho retrofit.
youtube.com/watch?v=8Cov5BcOcjk
____________________
00:00 - Intro
01:00 - What is wrong with the Maho CNC MIll?
01:36 - What is a following error?
03:13 - Why not rip out all the old electrical control hardware?
04:53 - Viewer suggestions.
05:58 - Trouble shooting
06:03 - 1/ Contactor issues.
06:05 - Open up the following error allowance
06:42 - contactor noise
08:48 - Fixing a design error I made during conversion.
11:48 - 2/ Indramat servo driver issues
13:08 - 3/ Motor brushes.
13:31 - 4/ Lubrication issues
15:17 - 5/ Heidenhain glass scale encoders?
15:43 - 6/ Servo tuning and allowable following error limit?⁄
16:24 - Testing
17:28 - What was root cause?
19:14 - Back in production
22:54 - Welding up a screw up.
26:13 - Milling out the dovetail slots.
28:45 - Our #1 fan - Nico!
30:18 - Facing tool holders.
____________________
Music:
Amit Sagie - Self Evolution
Roger Rivas - Live with Dub
