My Favorite 6S Racer | DieHard 2019 Race #3 @MrShutterBug
My Favorite 6S Racer | DieHard 2019 Race #3  @MrShutterBug
Uploaded July 2019 | Updated September 2026, 19 hours ago
I love this 5" racer so much, I thought I'd share it with all of you. This is what I'm flying for MultiGP drone racing this summer! Components, links, and SLT file listed below...

Here are the parts and a few options for your comparison shopping. The links to AirBlade and Heli-Nation are affiliate links. If you use those to buy something, then I get a small commission. That would be a sweet way for you to help support this channel at no extra cost to you! The PyroDrone links are not affiliate links. I just think it’s a great shop! Happy flying!

Floss 3.0 Frame (5" version):
- AirBlade UAV (bit.ly/2LSRNgv)
- Heli-Nation (bit.ly/2JvI0vg)
- PyroDrone (bit.ly/2LSlGOj)

Hyperlite 2206.5 21722KV Motors:
- PyroDrone (bit.ly/2ShEjfB)

Aikon F42020 Flight Controller:
- PyroDrone (bit.ly/2XKTHlN)

Aikon AK32PIN 35A 6S ESC:
- AirBlade UAV (bit.ly/2JLAV98)
- Heli-Nation (bit.ly/2xWe3yd)

Gigawatt 35A 6S ESC is the SAME ESC (in case the Aikon is sold out):
- AirBlade UAV (bit.ly/32kro1b)
- Heli-Nation has v2 (bit.ly/30zVoEG)
- PyroDrone (bit.ly/2SflQ3b)

Predator Micro Camera w/ 1.8mm Lens:
- AirBlade UAV (bit.ly/2xJndOb)
- Heli-Nation (bit.ly/2JLwbjw)
- PyroDrone (bit.ly/30wW6Ck)

Azure Power 5148 Props:
- AirBlade UAV (bit.ly/32s64qi)
- PyroDrone (bit.ly/30velrP)

FrSky XM+:
- AirBlade UAV (bit.ly/2XGEe6g)
- Amazon (amzn.to/2XwcGAi)
- PyroDrone (bit.ly/2JyR4jb)

AKK Oscar's VTX with MMCX:
- AirBlade UAV (bit.ly/2Gc86S7)
- Amazon (amzn.to/2JAlthf)

90 Degree MMCX to SMA Pigtail:
- Amazon (amzn.to/2Y5liCg)
- PyroDrone (bit.ly/2GaWnTZ)

UMMAGrip:
- AirBlade UAV (bit.ly/2JJBeRt)
- PyroDrone (bit.ly/2GdAjbb)

M3x8 Titanium Motor Screws:
- Amazon (amzn.to/2xKn5Ov)

14AWG XT60 Pigtail:
- PyroDrone (bit.ly/2XIGoXK)

M2 FC Mounting Hardware:
- PyroDrone (bit.ly/2YN8NZu)

Optional Cross Brace 4mm Carbon (5" size):
- PyroDrone (bit.ly/2XZdIt3)

Race Wire Mini:
- AirBlade UAV (bit.ly/2SjxQks)

3D Printed Turtle Mode Fin:
thingiverse.com/thing:3532417
My Favorite 6S Racer | DieHard 2019 Race #3Micro Drone Night!!!SMR Micro Drone Racing - Faster Faster Faster!Beta65X - Fastest 65mm Whoop!More GoPro FunBeta65X HD on an Indoor TrackBeta85X - Introducing the 4S WHOOPStealthy Little Ripper | HX100 SE 1S ToothpickTWIG + 1204 FULL SENDMicro Drone Racing - Postdoc BrewingTAKING IT TO THE NEXT LEVEL!Backyard Freestyle
Mr ShutterBug |

My Favorite 6S Racer | DieHard 2019 Race #3

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER