Xandad | My 4th of July Tribute to 'Murica @xandad5312 | Uploaded July 2018 | Updated October 2024, 1 hour ago.
I wanted to upload some more of the 3D-Printed, 8-String Mountain Dulcimer... but on Father's Day I had a major set-back. I dropped it, and sheared the head clean off!
While this could have ended tragically, I simply printed a new head... made a few adjustments to the gcode- thickening up perimeters, infill, etc. Then I had to get it all reassembled. Long story short... by July 4th it was ready to go again.
So here is my 4th of July Tribute to 'Murica... as interpreted through Jimmy Hendrix... to me and my #3DP8SMD! (3D-Printed, 8-String Mountain Dulcimer).
Also, by way of disclaimer, I have played the Star Spangled Banner before on dulcimer... but not in many years, not with this instrument anyway and definitely not with an amp. So be kind haha
#3Dprinterporn #xandad.com
I wanted to upload some more of the 3D-Printed, 8-String Mountain Dulcimer... but on Father's Day I had a major set-back. I dropped it, and sheared the head clean off!
While this could have ended tragically, I simply printed a new head... made a few adjustments to the gcode- thickening up perimeters, infill, etc. Then I had to get it all reassembled. Long story short... by July 4th it was ready to go again.
So here is my 4th of July Tribute to 'Murica... as interpreted through Jimmy Hendrix... to me and my #3DP8SMD! (3D-Printed, 8-String Mountain Dulcimer).
Also, by way of disclaimer, I have played the Star Spangled Banner before on dulcimer... but not in many years, not with this instrument anyway and definitely not with an amp. So be kind haha
#3Dprinterporn #xandad.com