Uploaded August 2021 | Updated September 2026, 2 weeks ago
Up to 20%-30% off for PCB & PCBA order:
Only 0$ for 1-4 layer PCB Prototypes:
nextpcb.com/?code=Htoeletric
Register and get $100 from NextPCB:
nextpcb.com/register?code=Htoeletric
๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐ ๐๐ฒ๐๐ฐ๐ฟ๐ถ๐ฝ๐๐ถ๐ผ๐ป:
This is basically a Wind Weather Station Box for multi-purpose applications. Along with this box, there is an Anemometer Sensor that can measure the wind speed. Inside the box, there are sensors like DHT11 Sensor, BMP280 Sensor, Buzzer, and some input-output ports for connecting external sensors.
The external sensor includes a PM2.5 Sensor and Anemometer. Also, there are several GPIO Ports for connecting whatever you like. There is a dedicated port for charging the device using a solar panel. Since the product is made using GSM Module A9G along with 32 bit Arduino Atmel Microcontroller, you can program the device using Arduino IDE.
So, in this project, we will see the functionalities of the box and check how the Wind Weather Station board is designed. We will upload the basic code to read the weather station data on OLED Display. A button can be pressed here to enable or disable the OLED Display. And finally, we will make an MQTT Based Wind Weather Station and monitor the data on MQTT Dashboard. The video is a little detailed, so watch it till the end to know about this exciting product.
Purchase Link: makerfabs.com/open-wind-statation-gprs-mqtt.html
๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐๐ ๐๐ถ๐ป๐ธ๐ & ๐ฆ๐ผ๐๐ฟ๐ฐ๐ฒ ๐๐ผ๐ฑ๐ฒ: how2electronics.com/mqtt-based-wind-weather-station-using-gsm-arduino
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.
Website: how2electronics.com
Facebook: facebook.com/how2electronics
Instagram: instagram.com/how2electronics
Up to 20%-30% off for PCB & PCBA order:
Only 0$ for 1-4 layer PCB Prototypes:
nextpcb.com/?code=Htoeletric
Register and get $100 from NextPCB:
nextpcb.com/register?code=Htoeletric
๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐ ๐๐ฒ๐๐ฐ๐ฟ๐ถ๐ฝ๐๐ถ๐ผ๐ป:
This is basically a Wind Weather Station Box for multi-purpose applications. Along with this box, there is an Anemometer Sensor that can measure the wind speed. Inside the box, there are sensors like DHT11 Sensor, BMP280 Sensor, Buzzer, and some input-output ports for connecting external sensors.
The external sensor includes a PM2.5 Sensor and Anemometer. Also, there are several GPIO Ports for connecting whatever you like. There is a dedicated port for charging the device using a solar panel. Since the product is made using GSM Module A9G along with 32 bit Arduino Atmel Microcontroller, you can program the device using Arduino IDE.
So, in this project, we will see the functionalities of the box and check how the Wind Weather Station board is designed. We will upload the basic code to read the weather station data on OLED Display. A button can be pressed here to enable or disable the OLED Display. And finally, we will make an MQTT Based Wind Weather Station and monitor the data on MQTT Dashboard. The video is a little detailed, so watch it till the end to know about this exciting product.
Purchase Link: makerfabs.com/open-wind-statation-gprs-mqtt.html
๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐๐ ๐๐ถ๐ป๐ธ๐ & ๐ฆ๐ผ๐๐ฟ๐ฐ๐ฒ ๐๐ผ๐ฑ๐ฒ: how2electronics.com/mqtt-based-wind-weather-station-using-gsm-arduino
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.
Website: how2electronics.com
Facebook: facebook.com/how2electronics
Instagram: instagram.com/how2electronics
