Uploaded July 2020 | Updated November 2026, 2 days ago
Alright, so here it is! I've finally got the studio hooked up properly, and here's a quick little shitty song to test the thing out. I'll breakdown what each synth does as best as I can remember here, since trying to put that in the vid would have taken a good couple minutes of talking heh. But basically, this is all being sequenced by the MV-8000, then being sent through quite a few outboard fx, then each of the first 24 channels on the Mackie 8-bus are recorded into REAPER via the stack of ADAT sitting in the bottom racks. It's so cool having the Mackie essentially be one massive mixer/interface, since the direct outs are post-fader I can do my mixing live! It's like having an X32 but definitely not having paid as much as an X32 hahaha.
Okay, so the song starts out with the RD-8 on drums, the MS-101 on bass, and the Matrix 6 on that gorgeous Obie brass sound. Then the MKS-50 lazily finds its pitch, followed by the ESQ-1 on some soft brass sounds. The JD-800 also throws some really washy gentle vocal pads across the stereo field here too. Super rich sound off that one, god I love the JD-800. At this point the ATC-1 can be heard doing it's weird little snappy pitch bend things in the background, kinda muted. It'll come back soonish. The TX81z comes in on some wobbly strings next to fill the space a bit. A little breakdown where the Deepmind 12D comes in with a pulsey spacey pad. The AX-80 comes in with a hollow, gentle pad sound. Finally, the transition comes up and we hear the JV-880 on the slow strings, with the AN1x coming in with some gorgeous brass stabs. And lastly, the lead at the end is the Behri Model D through the Hypnosis near it there.
Then for effects if I remember correct the Matrix 6 gets sidechained in the 3630 by the 808 kick, the drum bus goes through my VLA mk2, and the MS-101 goes through a dbx 166 for some crunch. Then it's ATC-1 through RE-101 tape delay, Matrix 6 through SDE-2500 before compression, the ESQ-1 through the Midiverb 2, MKS-50 through the Quadraverb.
This was mostly done as a test to see how well I could slap a track together while figuring the MV-8000 out. Basically tried to throw as many MIDI channels as I could at this thing to make sure it can handle it, as well as whether or not that old MIDI patchbay chokes. So far so good, it's been a dream to work on and honestly feels a little faster to work with the MPC pads all over it. Next step is to learn how to do automation and things of that nature slowly, this was all just note data and mod/bend info pretty much.
l hope you enjoy this bizarre eclectic mix of synths from all over! I'm a very lucky happy man to be able to piece something like this together. God I'm so excited, I've always dreamed of having a big boy mixer that could basically record each channel discretely. So cool. Sorry, I'll stop rambling now lol
Alright, so here it is! I've finally got the studio hooked up properly, and here's a quick little shitty song to test the thing out. I'll breakdown what each synth does as best as I can remember here, since trying to put that in the vid would have taken a good couple minutes of talking heh. But basically, this is all being sequenced by the MV-8000, then being sent through quite a few outboard fx, then each of the first 24 channels on the Mackie 8-bus are recorded into REAPER via the stack of ADAT sitting in the bottom racks. It's so cool having the Mackie essentially be one massive mixer/interface, since the direct outs are post-fader I can do my mixing live! It's like having an X32 but definitely not having paid as much as an X32 hahaha.
Okay, so the song starts out with the RD-8 on drums, the MS-101 on bass, and the Matrix 6 on that gorgeous Obie brass sound. Then the MKS-50 lazily finds its pitch, followed by the ESQ-1 on some soft brass sounds. The JD-800 also throws some really washy gentle vocal pads across the stereo field here too. Super rich sound off that one, god I love the JD-800. At this point the ATC-1 can be heard doing it's weird little snappy pitch bend things in the background, kinda muted. It'll come back soonish. The TX81z comes in on some wobbly strings next to fill the space a bit. A little breakdown where the Deepmind 12D comes in with a pulsey spacey pad. The AX-80 comes in with a hollow, gentle pad sound. Finally, the transition comes up and we hear the JV-880 on the slow strings, with the AN1x coming in with some gorgeous brass stabs. And lastly, the lead at the end is the Behri Model D through the Hypnosis near it there.
Then for effects if I remember correct the Matrix 6 gets sidechained in the 3630 by the 808 kick, the drum bus goes through my VLA mk2, and the MS-101 goes through a dbx 166 for some crunch. Then it's ATC-1 through RE-101 tape delay, Matrix 6 through SDE-2500 before compression, the ESQ-1 through the Midiverb 2, MKS-50 through the Quadraverb.
This was mostly done as a test to see how well I could slap a track together while figuring the MV-8000 out. Basically tried to throw as many MIDI channels as I could at this thing to make sure it can handle it, as well as whether or not that old MIDI patchbay chokes. So far so good, it's been a dream to work on and honestly feels a little faster to work with the MPC pads all over it. Next step is to learn how to do automation and things of that nature slowly, this was all just note data and mod/bend info pretty much.
l hope you enjoy this bizarre eclectic mix of synths from all over! I'm a very lucky happy man to be able to piece something like this together. God I'm so excited, I've always dreamed of having a big boy mixer that could basically record each channel discretely. So cool. Sorry, I'll stop rambling now lol










