Uploaded September 2026 | Updated November 2026, 6 days ago
The glue line kerf trick: how to glue up boards with V-grooves and no squeeze-out in the grooves. Pulled from Wes's chessboard build (watched more than half a million times), this shows the technique viewers asked about most. Chamfer the strips at 45° on the jointer, cut a tiny kerf along the flat of each joint, and the extra glue fills that kerf instead of squeezing up into the V-groove. You still use plenty of glue and still get squeeze-out on the back. Use it on chessboards, cutting boards, panels and any glue-up with a chamfered seam.
Watch next:
▶ Level Up Your Skills When You Build This Chessboard youtu.be/T0ksz9p-KWc
▶ The Simple Joint Every Woodworker Needs To Know youtu.be/50m6hOsCj38
▶ Playlist: Woodworking Joinery: Dovetails, Mortise & Tenon, Dados, Pocket Holes and Glue-Ups youtube.com/playlist?list=PLWCdoyoKvGCE
Chapters:
0:00 The glue-up viewers asked about
0:42 Cutting 2-1/2" strips
1:01 45° chamfer on the jointer
1:40 The V-groove squeeze-out problem
2:40 Cutting the glue line kerf
3:42 Gluing and clamping
4:22 Out of clamps: a clean groove
5:22 Where to use a glue line
And remember — Always Think Safety.
#woodworking #wood #woodshop
Full video of the original build : youtu.be/rRlFRFKZ1_I?si=HJI_jgFTnOJPusdT
6" jointer amzn.to/4rbgbvF
Clamps. amzn.to/4rbgbvF
Wood Glue amzn.to/4rbgbvF
Table saw amzn.to/4yv1jup
The glue line kerf trick: how to glue up boards with V-grooves and no squeeze-out in the grooves. Pulled from Wes's chessboard build (watched more than half a million times), this shows the technique viewers asked about most. Chamfer the strips at 45° on the jointer, cut a tiny kerf along the flat of each joint, and the extra glue fills that kerf instead of squeezing up into the V-groove. You still use plenty of glue and still get squeeze-out on the back. Use it on chessboards, cutting boards, panels and any glue-up with a chamfered seam.
Watch next:
▶ Level Up Your Skills When You Build This Chessboard youtu.be/T0ksz9p-KWc
▶ The Simple Joint Every Woodworker Needs To Know youtu.be/50m6hOsCj38
▶ Playlist: Woodworking Joinery: Dovetails, Mortise & Tenon, Dados, Pocket Holes and Glue-Ups youtube.com/playlist?list=PLWCdoyoKvGCE
Chapters:
0:00 The glue-up viewers asked about
0:42 Cutting 2-1/2" strips
1:01 45° chamfer on the jointer
1:40 The V-groove squeeze-out problem
2:40 Cutting the glue line kerf
3:42 Gluing and clamping
4:22 Out of clamps: a clean groove
5:22 Where to use a glue line
And remember — Always Think Safety.
#woodworking #wood #woodshop
Full video of the original build : youtu.be/rRlFRFKZ1_I?si=HJI_jgFTnOJPusdT
6" jointer amzn.to/4rbgbvF
Clamps. amzn.to/4rbgbvF
Wood Glue amzn.to/4rbgbvF
Table saw amzn.to/4yv1jup





