Uploaded January 2017 | Updated September 2026, 1 week ago

---

MORGAN HOTMELT COATER
Currently producing pressure sensitive label stock
Roller face with: 1200mm
Coating width: 1020mm
Maximum line speed 250m/min, coating speed with current melter 160m/min
Oil heated coating rollers: coating weight range, 10gsm-60gsm
Main panel, touch screen control
Unwinds
2 x shaftless unwinds with combi chuck 76mm and 152mm with motorised movement of the shaftless arms
Auto tension via pneumatic brake
Maximum diameter: 1500mm
Motorised side lay movement for manual web control
Coating: 2 roll coater
Coating roller fine gap adjustment
Full control over applicator and metering roller RPM
Full control over coating nip pressure
Nordson drum melter
Flying splice/rewind
Dancer controlled, AC driven double shaft current rewind airshaft
Touch screen setup
Tension, splice length etc.
Splice length: minimum 50m to 3000m
Splice at line speed, no slow down
3 phase input, 200amp including oil heater and melter
Delta PLC control
Delta AC drives
Approximately 6 tonnes shipping weight