@CurryKitten
  @CurryKitten
CurryKitten | More iNav Wing testing... and a little bit of launch failure @CurryKitten | Uploaded 2 years ago | Updated 2 days ago
I went out and maidened this wing in high winds, and although it flew fine, it was very difficult to tell if the iNav tuning had really done its best job. So just before I actually remove the analog FPV system and replace it with Open.HD I thought I'd go out in much more suitable conditions to see how it flies, redo the autotune and take it for a longer flight or two.

If you liked this video and want to show your support please feel free to join my Patreon supporters here patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it banggood.com/?p=E81211714085201408XQ

If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me
More iNav Wing testing... and a little bit of launch failureDiatone Q33  Tiny 1/76th scale FPV Car - lots of fun!  Supplied by BanggoodOchin Board 2.  Use in OpenHD as a ground or air unit10 Years of flying FPV - so lets fly some old stuff!HGLRC Thor Parallel Charge board & Standalone discharge module.  Supplied by HGLRCReflying & refining the Mini Talon - lots of little things to fixOpen.HD Project Part 4: Using goggles, better DVR & Updating everythingBetaFPV Air 75 Whoop - its wonderful to flyBetaFPV SuperG Nano ELRS TX - it supports Gemini mode!RunCam Thumb Part 2: Using the TPU mount.  Is it smoother?  Will GyroFlow save us?HonsVR Prescription lenses for DJI FPV goggles and VR HeadsetsBetaFPV Pavo25 Cinewhoop Frame.  Building and flying it.  Supplied by BetaFPV

More iNav Wing testing... and a little bit of launch failure @CurryKitten

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER