Uploaded December 2024 | Updated November 2026, 2 hours ago
(WARNING: This video contains rapidly strobing images and may potentially trigger seizures for people with photosensitive epilepsy. Viewer discretion is advised.)
The new ModRetro Chromatic, a handheld FPGA console which simulates a Game Boy Color and plays original Game Boy and Game Boy Color cartridges, has the ability to output video being displayed on its screen to its USB Type-C port while the handheld is being played. When connected to a PC vis USB, the Chromatic shows up as a webcam. Capture software like OBS can capture the video output from the console's USB port. The video is captured at the GBC's native screen resolution, 160x144. I have upscaled the output by 15x, but it is perfectly sharp in its native resolution with no excess color. The accompanying audio must be recorded by the headphone jack if the whole experience is to be captured.
The Chromatic has an interesting 3:1 frame blending mode not seen on the other FPGA handhelds I own, the FPGBC and Analogue Pocket. They use a 2:1 frame blending mode, which usually eliminates flicker. Some games rapidly alternate between two sets of colors for certain objects, relying on the slow response time of the LCD crystals to alter the light's polarization to change the shade or color to give a transparency effect. I believe the Chromatic may be trying to simulate the flicker seen on an original GBC screen, especially with monochrome games. The GBC has faster pixel response times by using a TFT display as opposed to the older STN displays of monochrome systems. I have tried to capture how it can affect the graphics when the mode is turned on and off. I have featured four games, two monochrome, two color, which use the flickering more or less to some intended effect:
0:00 - Chikyuu Kaihou Gun ZAS
1:01 - Serpent
1:50 - 3D Pocket Pool
3:17 - Shantae
Each game is started with the frame blend off, then turned on. The Chromatic's Menu will appear to show when the change occurs.
One thing I want to emphasize is that this flicker does not accurately represent the flicker seen on the Chromatic's screen. There is flicker with the frame blending setting on and off but it is less noticeable on that screen. Also, that screen does not show any frame skipping, at least none that I can perceive, with either setting choice. The Game Boy and Game Boy Color run at a frame rate of 59.7225Hz and the webcam outputs 60Hz, so frames must be duplicated at certain points to make up the difference. What I am trying to show is how the frame blend option works through the capture function and the relative amount of flicker reduction one can expect by turning the option on either with the screen or the webcam's output.
You may notice that the audio is very noisy. This appears from the output when the Chromatic is connected via USB. I had to use my best USB Type-C to Type-C cable from my Analogue Pocket and connect the Chromatic directly to one of my PC motherboard's Type-C ports to get the noise as low as I could. I also tried other audio cables and none improved the noise. The audio is recorded at its maximum volume from the volume wheel and my PC's line input is at its 100% input level. Just before the five minute mark I pull out the USB cable from the Chromatic (which will switch to batteries if in the console) to record audio without the cable's interference. This is why the video stays a static screen at the end.
(WARNING: This video contains rapidly strobing images and may potentially trigger seizures for people with photosensitive epilepsy. Viewer discretion is advised.)
The new ModRetro Chromatic, a handheld FPGA console which simulates a Game Boy Color and plays original Game Boy and Game Boy Color cartridges, has the ability to output video being displayed on its screen to its USB Type-C port while the handheld is being played. When connected to a PC vis USB, the Chromatic shows up as a webcam. Capture software like OBS can capture the video output from the console's USB port. The video is captured at the GBC's native screen resolution, 160x144. I have upscaled the output by 15x, but it is perfectly sharp in its native resolution with no excess color. The accompanying audio must be recorded by the headphone jack if the whole experience is to be captured.
The Chromatic has an interesting 3:1 frame blending mode not seen on the other FPGA handhelds I own, the FPGBC and Analogue Pocket. They use a 2:1 frame blending mode, which usually eliminates flicker. Some games rapidly alternate between two sets of colors for certain objects, relying on the slow response time of the LCD crystals to alter the light's polarization to change the shade or color to give a transparency effect. I believe the Chromatic may be trying to simulate the flicker seen on an original GBC screen, especially with monochrome games. The GBC has faster pixel response times by using a TFT display as opposed to the older STN displays of monochrome systems. I have tried to capture how it can affect the graphics when the mode is turned on and off. I have featured four games, two monochrome, two color, which use the flickering more or less to some intended effect:
0:00 - Chikyuu Kaihou Gun ZAS
1:01 - Serpent
1:50 - 3D Pocket Pool
3:17 - Shantae
Each game is started with the frame blend off, then turned on. The Chromatic's Menu will appear to show when the change occurs.
One thing I want to emphasize is that this flicker does not accurately represent the flicker seen on the Chromatic's screen. There is flicker with the frame blending setting on and off but it is less noticeable on that screen. Also, that screen does not show any frame skipping, at least none that I can perceive, with either setting choice. The Game Boy and Game Boy Color run at a frame rate of 59.7225Hz and the webcam outputs 60Hz, so frames must be duplicated at certain points to make up the difference. What I am trying to show is how the frame blend option works through the capture function and the relative amount of flicker reduction one can expect by turning the option on either with the screen or the webcam's output.
You may notice that the audio is very noisy. This appears from the output when the Chromatic is connected via USB. I had to use my best USB Type-C to Type-C cable from my Analogue Pocket and connect the Chromatic directly to one of my PC motherboard's Type-C ports to get the noise as low as I could. I also tried other audio cables and none improved the noise. The audio is recorded at its maximum volume from the volume wheel and my PC's line input is at its 100% input level. Just before the five minute mark I pull out the USB cable from the Chromatic (which will switch to batteries if in the console) to record audio without the cable's interference. This is why the video stays a static screen at the end.

![Contra 魂斗羅/コントラ Famicom Playthrough
Here is a playthrough of Famicom Contra, the version that we did not get. What the US received was the Japanese version pared down to its bare essentials. The Japanese version has an introduction and in-between cutscenes to tell the story with graphics not present in the US version. It also has background animations in Stages 1, 5 and 8 which the US version lacks. The ending is superior as well. Of course, the US cartridge only had 128KiB of Program ROM and 8KiB of Character RAM and a simple memory bankswitching controller scheme compared to the custom memory mapper and 128KiB Program ROM plus the 128KiB Character ROM the Japanese game used.
I have previously posted a playthrough of the US Contra using a stock front loader NES and its composite video output. This playthrough was captured via an Analogue Nt Mini, the opposite end of the quality scale with HDMI output. Despite my inept performance in Stage 7, no FPGAs were harmed in the making of this video. I was using the 8bitdo N30 2.4G Wireless Controller, and as you can see it is no slouch in a game that demands precision. At no time did I use the turbo buttons despite being solely tempted against those spiked walls in Stage 7.
While I could have patched the ROM to use the English Translation patch, I decided to use a pure ROM. There is not much Japanese text in the game, but what is here I have taken the translation patchs text to give the translation at the time reference.
00:39 - Attract
Contra is a title awarded to a superior soldier possessing almost super-human drive and ability, while excelling in guerrilla tactics.
01:09 - Stage 1
[First Screen] In the year 2631 A.D., a mysterious meteorite fell into the Galuga Archipelago near New Zealand.
[Second Screen] Two years later, a mysterious invaider calling itself Red Falcon plots the downfall of mankind by fortifying the entire Galuga Archipelago.
[Third Screen] Orders were given to Bill and Lance of the Earth Marine Corps Contra unit to destroy the enemys base.
04:13 - Stage 2
We have arrived at Point A. Commencing Infiltration
06:09 - Stage 3
Garumakiruma has been neutralized. Were now heading to Point B.
08:38 - Stage 4
We have arrived at Point B. Commencing Infiltration
12:02 - Stage 5
Godomuger has been neutralized. Our objective is to reach the enemys base at Point C.
15:13 - Stage 6
We have arrived at Point C. Communication will now be impossible. We will do our best to destroy the enemys base.
18:18 - Stage 7
The bases interior defense system has been activated. Its now or never...
27:17 - Stage 8
It seems we have arrived at the enemys base. What is this place? Contra 魂斗羅/コントラ Famicom Playthrough](https://i.ytimg.com/vi/wCHOdvOJA1k/mqdefault.jpg)








