Modifying martinbuilt Ram Air to fit 2008 Intake Manifold w/ 75mm Throttle Body @martinbuilt
Modifying martinbuilt Ram Air to fit 2008 Intake Manifold w/ 75mm Throttle Body  @martinbuilt
Uploaded September 2018 | Updated November 2026, 3 hours ago
I had to make some changes to the martinbuilt Ram Air after installing the 2008+ Intake manifold and a Chevy 75mm Throttle Body in a 2004 Jeep Grand Cherokee. Because of the adapter and the GM throttle body, it moves the Ram Air forward and up and this causes hood clearance problems. This would also happen if using the Mopar 4.7 throttle body. I had to redesign the front and the top of the Ram Air.
Here is a link to the original build of this Ram Air youtu.be/45YNy7LvIHU
Gino Development 01-0143 Plastic Welding Kit with Black Plastic Rods and Mesh, 80W Iron amzn.to/2VFuatR
CLC Custom Leathercraft 302 Medium Shock Absorption Kneeling Pad, 14 x 21-Inch amzn.to/2THCsEL
JB Weld amzn.to/2O66xrq
MOPAR 53034229AA - Plenum Engine Intake amzn.to/2WQ2SD8

Facebook facebook.com/Martinbuilt-2351766611763181
#martinbuilt #jeepupgrades #jeepgrandcherokee
Modifying martinbuilt Ram Air to fit 2008 Intake Manifold w/ 75mm Throttle BodyWeatherTech Floor Liners vs Husky Floor Liners for 99-04 Jeep Grand CherokeeReplacing 99-04 Jeep Grand Cherokee Motor MountsHow to Add Fuses to the Factory Fuse BoxJeep Grand Cherokee Really Bad Accident (not my Jeep)How to Build a Automotive Smoke Machine (Vacuum Leak Detector)How to Check Intake Port Matching from Cylinder Head to Intake ManifoldHow to Install Doug Thorley Headers on a 99-04 Jeep Grand Cherokee with 4.7Review of the KMC XD Series Pulley Wheels on Dodge DakotaHow to Install Nutsert, Blind Nuts, Rivnuts, Rivet Nut with RZX ToolDrilling/Reaming Jeep Knuckles for GM 1 Ton Tie RodsRemove & Replace Lifters & Rockers on a 4.7 & 3.7 Jeep Dodge Chrysler & Mitsubishi
martinbuilt |

Modifying martinbuilt Ram Air to fit 2008 Intake Manifold w/ 75mm Throttle Body

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER