Uploaded October 2011 | Updated November 2026, 23 hours ago
From brooklynaerodrome.com After recently seeing the Towel on Make Live. I decided to build one, secretly luring my friends in on the endeavor. So far two of us have enough parts to build and fly one as you can see here. Soon we will fly 3 in the air at the same time. I flew mine until it broke, and then transferred my battery and receiver to my friend Jason's plane. I'm really glad it came out of that tree! This was a VERY successful and fun day of flying. Build one of these planes... brooklynaerodrome.com - the design seems very robust. We changed the motor and prop, and I even changed the way it was mounted (stick mount). The CG was 1" forward from the leading edge of the prop slot, with stock trim of 1/4" and it was flying great at you can EVENTUALLY see.
From brooklynaerodrome.com After recently seeing the Towel on Make Live. I decided to build one, secretly luring my friends in on the endeavor. So far two of us have enough parts to build and fly one as you can see here. Soon we will fly 3 in the air at the same time. I flew mine until it broke, and then transferred my battery and receiver to my friend Jason's plane. I'm really glad it came out of that tree! This was a VERY successful and fun day of flying. Build one of these planes... brooklynaerodrome.com - the design seems very robust. We changed the motor and prop, and I even changed the way it was mounted (stick mount). The CG was 1" forward from the leading edge of the prop slot, with stock trim of 1/4" and it was flying great at you can EVENTUALLY see.

![Stickermule.com Stickers vs. Labels [SEE DESCRIPTION]
My personal preference for Vectrex cart labels
#1 is CLEAR STICKER material which has high resolution and glows a bit with a translucent case. These come individually die cut and are hard to peel.
#2 is NON-CLEAR LABEL material which still has a high resolution, but looks a bit grainy, but actually the colors are brighter and technically can look sharper if you dont focus too close on it. This is actually a close tie to #1 if you dont specifically need the label to fully light up from behind, or be clear in some way. Ive made one where the game title is clear so the light shines through (Turkey Hero). Best to get these on a roll, and they are easy to peel and align. Ill have to upload a video of how I do my alignment!!
#3 is NON-CLEAR STICKER material which honestly has the worst resolution, but good for give away stickers I think. Perhaps a design with less sharp edges would be good for this one?
#4 is CLEAR LABEL material which is glossy and has weird texture based on the art used, but if you want glossy, its a good pick. Of course if you need a CLEAR GLOSSY label as well... this is the one for you.
Use my Stickermule Invite link and youll get a $10 credit!
https://www.stickermule.com/unlock?ref_id=6856214701&utm_medium=link&utm_source=invite
More details
Stickers vs. Labels: https://www.stickermule.com/support/difference-between-stickers-and-labels
Roll labels vs. Sheet labels: https://www.stickermule.com/support/what-is-the-difference-between-sheet-labels-and-roll-labels (TL;DR, they are basically the same finish, but sheet is a bit thicker and cheaper, however harder to peel and stick)
Music - Zelda Lost Woods (Vector U Remix) Stickermule.com Stickers vs. Labels [SEE DESCRIPTION]](https://i.ytimg.com/vi/R6jj29X_Yas/mqdefault.jpg)



. I just wanted something to play with :D This is the first test of my Vectrex Stereo AY adapter. This goes between your AY-3-8912 sound chip and the socket on the Vectrex logic PCB, and allows you to hear the Vectrex like youve never thought possible. #no-cut-mod #vectrex
Open source now! Be sure to observe the license, its non-commercial.
https://github.com/technobly/vectrex-stereo-ay Vectrex Stereo AY (AY-3-8912/AY-3-8910)](https://i.ytimg.com/vi/SDDFqmjVvJo/mqdefault.jpg)




