Uploaded December 2023 | Updated November 2026, 55 minutes ago
Mode Loop: modedesigns.com/pages/loop-tkl
Mode Loop Written Build Guide: modedesigns.com/pages/loop-build-guide
This is the official build guide of our latest tenkey-less layout keyboard, the Mode Loop. For any technical questions, order help, or any other inquiries, feel free to join our Discord or email our support team at support@modedesigns.com.
MX Switches Lubing Tutorials:
- Alexotos: youtube.com/watch?v=88tnUYbxaIs
- Taeha Types: youtube.com/watch?v=44Wv4OGdmu4&t=4s
Stabilizers Lubing Tutorial: youtu.be/XPK3i2Hunu4
--
Join the Mode Community:
- Discord: discord.gg/Mvsq4BP
- Instagram: instagram.com/modekeyboards
- Twitter: twitter.com/modekeyboards
Timestamps:
0:00 - Keyboard Overview
0:26 - Unboxing
1:09 - Step 1: Test PCB
2:22 - Step 2: Disassembly
2:48 - Step 3: Install Daughterboard
3:07 - Step 4: Install Weight
4:15 - Step 5: Install PE Foam (optional)
4:33 - Step 6: Install Stabilizers
6:13 - Step 7: Check Switches
6:23 - Plate Foam
6:37 - Step 8: Install Switches
6:46 - Step 9: Confirm Switch Installation
7:26 - Step 10: Install Mounting Blocks
7:51 - Case Foam
8:00 - Step 11: Attach Plate/PCB to Case
8:27 - Step 12: Install Accent
8:46 - Step 13: Install Top Case to Bottom Case
9:08 - Step 14: Install Feet
9:40 - Step 15: Tune Stabilizers
10:00 - Step 16: VIA
10:23 - Outro
#ModeDesigns #Loop #BuildGuide
Mode Loop: modedesigns.com/pages/loop-tkl
Mode Loop Written Build Guide: modedesigns.com/pages/loop-build-guide
This is the official build guide of our latest tenkey-less layout keyboard, the Mode Loop. For any technical questions, order help, or any other inquiries, feel free to join our Discord or email our support team at support@modedesigns.com.
MX Switches Lubing Tutorials:
- Alexotos: youtube.com/watch?v=88tnUYbxaIs
- Taeha Types: youtube.com/watch?v=44Wv4OGdmu4&t=4s
Stabilizers Lubing Tutorial: youtu.be/XPK3i2Hunu4
--
Join the Mode Community:
- Discord: discord.gg/Mvsq4BP
- Instagram: instagram.com/modekeyboards
- Twitter: twitter.com/modekeyboards
Timestamps:
0:00 - Keyboard Overview
0:26 - Unboxing
1:09 - Step 1: Test PCB
2:22 - Step 2: Disassembly
2:48 - Step 3: Install Daughterboard
3:07 - Step 4: Install Weight
4:15 - Step 5: Install PE Foam (optional)
4:33 - Step 6: Install Stabilizers
6:13 - Step 7: Check Switches
6:23 - Plate Foam
6:37 - Step 8: Install Switches
6:46 - Step 9: Confirm Switch Installation
7:26 - Step 10: Install Mounting Blocks
7:51 - Case Foam
8:00 - Step 11: Attach Plate/PCB to Case
8:27 - Step 12: Install Accent
8:46 - Step 13: Install Top Case to Bottom Case
9:08 - Step 14: Install Feet
9:40 - Step 15: Tune Stabilizers
10:00 - Step 16: VIA
10:23 - Outro
#ModeDesigns #Loop #BuildGuide










