![MN D90 - Stunning! [ WPL Family Derivative 1/12th ] @MrE.](https://i.ytimg.com/vi/shpIPExKma4/maxresdefault.jpg)
Uploaded February 2019 | Updated September 2026, 6 hours ago
A stunning looking kit with the usual options for upgrading in the future.
MN-90 Kit: bit.ly/2Fo6tlp (BG)
MN-90 Kit: bit.ly/2Qlbqws (GB)
ESC: bit.ly/2KfurBx
Check which is cheapest as I managed to bag this at £25~ with the usual extra discounts.
With a little effort on painting up the body it looks an order of magnitude better and other than the vehicles track width (being a 1/12th), most things are very similar or identical to WPL stuff.
A video will follow regards how it was painted and the lighting etc, I assume It will be getting upgrades in the future.
As with most of the other WPL stuff, dont bother wit the RTR's as they are junk electronics and non proportional steering etc.
Thank you for watching, I'm always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appriciate it very much.
Data burst containing the usual information can be found on the outro.
A stunning looking kit with the usual options for upgrading in the future.
MN-90 Kit: bit.ly/2Fo6tlp (BG)
MN-90 Kit: bit.ly/2Qlbqws (GB)
ESC: bit.ly/2KfurBx
Check which is cheapest as I managed to bag this at £25~ with the usual extra discounts.
With a little effort on painting up the body it looks an order of magnitude better and other than the vehicles track width (being a 1/12th), most things are very similar or identical to WPL stuff.
A video will follow regards how it was painted and the lighting etc, I assume It will be getting upgrades in the future.
As with most of the other WPL stuff, dont bother wit the RTR's as they are junk electronics and non proportional steering etc.
Thank you for watching, I'm always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appriciate it very much.
Data burst containing the usual information can be found on the outro.
![MN D90 - Stunning! [ WPL Family Derivative 1/12th ]](https://i.ytimg.com/vi/shpIPExKma4/mqdefault.jpg "MN D90 - Stunning! [ WPL Family Derivative 1/12th ]
A stunning looking kit with the usual options for upgrading in the future.
MN-90 Kit: http://bit.ly/2Fo6tlp (BG)
MN-90 Kit: http://bit.ly/2Qlbqws (GB)
ESC: http://bit.ly/2KfurBx
Check which is cheapest as I managed to bag this at £25~ with the usual extra discounts.
With a little effort on painting up the body it looks an order of magnitude better and other than the vehicles track width (being a 1/12th), most things are very similar or identical to WPL stuff.
A video will follow regards how it was painted and the lighting etc, I assume It will be getting upgrades in the future.
As with most of the other WPL stuff, dont bother wit the RTRs as they are junk electronics and non proportional steering etc.
Thank you for watching, Im always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appriciate it very much.
Data burst containing the usual information can be found on the outro.")
![Rotating Stand [ 3D Printed Helper ]](https://i.ytimg.com/vi/tVM_NRGlrS4/mqdefault.jpg "Rotating Stand [ 3D Printed Helper ]
Heres a handy little helper for a plethora of uses like modeling, fixing stuff and videography etc.
Bearing used: http://bit.ly/2MnoktD (30p on sale)
Bearings x 10: http://bit.ly/2MppCUT
Thingiverse Link: http://bit.ly/2Hp3TxC
It utilises a single common bearing and has different platforms with the view to use custom made ones as desired.
Thank you for watching, Im always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appriciate it very much.
Data burst containing the usual information can be found on the outro.")
![Iflight Succex F4 + Crsf Nano [Viewer issue - FPV Chrissy Boy]](https://i.ytimg.com/vi/tZLJTXgNGm0/mqdefault.jpg "Iflight Succex F4 + Crsf Nano [Viewer issue - FPV Chrissy Boy]
Fellow Pilot, Chrissy had trouble with these so I tried the same stuff to see if it was a common issue.
Tadpole Frame: http://bit.ly/2TbWBS4
Iflight Succex (V1): http://bit.ly/37VCfk8 (V 2.1 From Armattan)
Runcam Nano 2: http://bit.ly/2sWBmJl
Tattu 450mAh 3S: http://bit.ly/2FFwoTK
R-XSR: http://bit.ly/2B0w26Q
Triblades: http://bit.ly/2uCGxyt
Bi-Blades: http://bit.ly/3083Hsd
Eachine Nano VTX: http://bit.ly/36DEloq (Unify Pro32 Nano From Armattan)
Thank you for watching, Im always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appreciate it very much.
My Gear:
Runcam 5: http://bit.ly/2OlSnX8
Runcam 3: http://bit.ly/2sOuQOr
FrSky Taranis X-Lite : http://bit.ly/2DA8xlI
Aomway Commanders: http://bit.ly/2xClXuP
Data burst containing the usual information can be found on the outro.")
![Project Pootle [ Ep #5 - Proximity Flying Duration Test]](https://i.ytimg.com/vi/twTZHoJGBEw/mqdefault.jpg "Project Pootle [ Ep #5 - Proximity Flying Duration Test]
Finaly found the restraint to test a full batterys duration.
Happy as Larry with the result of this project and its a great quad to get an order of magnitude more proximity flying time in.
Parts:
Frame: http://bit.ly/2DevqzK
Motors: http://bit.ly/2NX3jZQ http://bit.ly/2pqFony
Escs: http://bit.ly/2fyiYgD
Flight Controller: http://bit.ly/2bKghXo
Camera @ VTX: http://bit.ly/2xBGf8W
Receiver: http://bit.ly/2plJHki
Thank you for watching, Im always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appriciate it very much.
My Gear:
FrSky Taranis X-Lite : http://bit.ly/2DA8xlI
Aomway Commanders: http://bit.ly/2xClXuP
Runcam 3: http://bit.ly/2sOuQOr
Data burst containing the usual information can be found on the outro.
Music:
Last Heroes - Dimensions [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/ZPuvoDZj2hM
Free Download / Stream: http://ncs.io/DimensionsYO
Track: Mountkid - Dino [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/Au6fH-6xrEU
Free Download / Stream: http://ncs.io/dinoYO
JPB - Get Over You (feat. Valentina Franco) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/Z2E_32dkoWU
Free Download / Stream: http://ncs.io/GetOverYouYO")
![Friendly Amputee Octopus [Realacc Four Armed Helper Thingymajiggy]](https://i.ytimg.com/vi/u2zayCp6OX4/mqdefault.jpg "Friendly Amputee Octopus [Realacc Four Armed Helper Thingymajiggy]
Now I have 6 hands!
Realacc Four Armed Helper: http://bit.ly/2O6mSvX
Having already put some time on this tool attending to recent projects I find this thing is ideal, its rather costly but none the less it one of those things that you buy once. Prehaps I may add an LED or fan to it in future.
I cants imagine you could possibly need the 6 or 8 armed version of this ,however they do a 3 armed one which would be just as useful!
The little module I soldered up is featured in this project:
Which consists of a flight controller and a receiver;
Omnibus F4 (20x20mm): http://bit.ly/2uB23AW
D8 Receiver: http://bit.ly/2uTKcEr
Thank you for watching, Im always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appriciate it very much.
Data burst containing the usual information can be found on the outro.")
![Armattan Tadpole [ Part 3 - Build & Shakedowns ]](https://i.ytimg.com/vi/u9PCXxQzDqY/mqdefault.jpg "Armattan Tadpole [ Part 3 - Build & Shakedowns ]
Wrapping up the Tadpole build ,a couple of issues and some shakedowns.
This Tadpole from Aramattan is one of my favourites, it punches well above its weight with no drawbacks!
Tadpole Frame: http://bit.ly/2TbWBS4
Iflight Succex (V1): http://bit.ly/37VCfk8 (V 2.1 From Armattan)
Foxeer Predator Nano V4: https://bit.ly/2WaNYHn
Tattu 450mAh 3S: http://bit.ly/2FFwoTK
R-XSR: http://bit.ly/2B0w26Q
Triblades: http://bit.ly/2uCGxyt
Bi-Blades: http://bit.ly/3083Hsd
Eachine Nano VTX: http://bit.ly/36DEloq (Unify Pro32 Nano From Armattan)
Thank you for watching, Im always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appreciate it very much.
My Gear:
Runcam 5: http://bit.ly/2OlSnX8
Runcam 3: http://bit.ly/2sOuQOr
FrSky Taranis X-Lite : http://bit.ly/2DA8xlI
Aomway Commanders: http://bit.ly/2xClXuP
Data burst containing the usual information can be found on the outro.
Music:
Track: Jim Yosef x ROY KNOX - Sun Goes Down [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/Hois2F0Jy2Y
Free Download / Stream: http://ncs.io/SunGoesDown
Track: ROY KNOX x WTCHOUT - Shadows (Feat. Sviivan) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/o8Y_uR6ZDxo
Free Download / Stream: http://ncs.io/RWShadows
Track: Max Brhon - Illusion [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/XN4C1Vs6qgs
Free Download / Stream: http://ncs.io/Ilussion")
![WeBLEED Track 7 S3 [ MrE ]](https://i.ytimg.com/vi/v9tQQjWOiE8/mqdefault.jpg "WeBLEED Track 7 S3 [ MrE ]
A quick nemesis run from a track I created for the WeBLEED eSports Season 3.")
![RaceGOW 5 [ Track 6 - Nanoscout]](https://i.ytimg.com/vi/vAfba39ULiI/mqdefault.jpg "RaceGOW 5 [ Track 6 - Nanoscout]
Another 6 pack jobbie - struggling with a bit of dexterity but happy to have put a time in!")
![Youre Sus Bro... [ Taking MY top time back from @Kent FPV :) ]](https://i.ytimg.com/vi/vwMi_jMrnvg/mqdefault.jpg "Youre Sus Bro... [ Taking MY top time back from @Kent FPV :) ]
Meep Meep
@Kent FPV s theft of my top time (https://www.youtube.com/watch?v=oBQUTfWZ6pw)")
![X-lite Quick Tip [ Faux Momentary Switches for Telemetry, Timers & Simulator Functionality ]](https://i.ytimg.com/vi/wZdtrLoeNpA/mqdefault.jpg "X-lite Quick Tip [ Faux Momentary Switches for Telemetry, Timers & Simulator Functionality ]
A quick tip to replicate a momentary switch on the X-Lite.
FrSky Taranis X-Lite : http://bit.ly/2DA8xlI
I miss the versatile and useful momentary from the X9D+ and X7 so this is the next best thing for both getting telemetry/timers etc while flying & also using with a simlator as a quick access button for resets and the like.
I like to call it a Faux Momentary
Thank you for watching, Im always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appriciate it very much.
Data burst containing the usual information can be found on the outro.")
