[MK8] Configurable Rapidfire (Release) @DarkFlare
[MK8] Configurable Rapidfire (Release)  @DarkFlare
Uploaded July 2017 | Updated November 2026, 3 days ago
This is a code I made for Mario Kart 8 that will automatically fire items at a certain configurable speed. You will get to set the speed yourself. In the video I show a few different values and how fast the items spam so you can watch and see which speed best suits you.

The amount of items per second that are shown in the video are estimates based on the fact that the codehandler executes about 120 times per second, according to CosmoCortney's website. The "XX times per second" shouldn't really be regarded when choosing your speed. I got these by doing 0x78 / (value) and then converting that to decimal. Except for the last one, that should actually be 60 times per second.

Rapidfire [DarkFlare]
C0000008 60000000
3C201F6B 60214C18
80210000 3C404445
6042A96C 80420000
7C820A14 3C601100
6063000C 90830000
60000000 3C40010F
60426AE0 7C4903A6
4E800420 00000000
D0000000 DEADCAFE
09000000 1F604EA3
00000080 00000000
10020000 11000004
14040000 00000001
11020000 11000004
D0000000 DEADCAFE
03020000 11000004
000000XX 00000000 # XX = Speed
00020000 11000004
00000000 00000000
30000000 1100000C
45000000 4A000000
00100000 00000000
D0000000 DEADCAFE
03020000 11000004
00000100 00000000
00020000 11000004
00000000 00000000
D0000000 DEADCAFE
*XX = Speed (Lower = faster; maximum = FF; minimum = 01)

Remember that shitty item hacks will likely activate anti cheat if you use anything less than around 0x20, so be careful when determining the value to use online.

This is a "hybrid" code because some of it is written in ASM and some of it is not.

Source:
lis r1, 0x1F6B
ori r1, r1, 0x4C18
lwz r1, 0 (r1)
lis r2, 0x4445
ori r2, r2, 0xA96C
lwz r2, 0 (r2)
add r4, r2, r1
lis r3, 0x1100
ori r3, r3, 0x000C
stw r4, 0 (r3)

When I made the code originally, it only worked offline. I found out that all of the pointers pointed to the item table itself and not to the specific player. I couldn't find one that led to the specific player, as I originally thought, since each player gets 8 bits and all players are directly next to each other opposed to each player having their own area in the RAM for this (like how almost everything in MK8 is). So I had to use ASM to store the users current player slot into a register, then load the item table pointer into another register, add the two together, and then store it to a dud offset (1100000C). I then used that address as a pointer in the non-ASM portion and it worked.

Music:
Cotarvoid - Lacuna
Onhar - Sky

Thumbnail (by me): http://i.imgur.com/GQ2esHI.jpg

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Twitter: bit.ly/2n85dq6
Donate: bit.ly/1RMESY8
Subscribe: bit.ly/24FZ4lF
Website: bit.ly/1TYsPJw
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Thanks for watching! Like, subscribe, and comment for more codes, tutorials & videos :)
[MK8] Configurable Rapidfire (Release)[Switch] How To Overclock Your System (Free & Easy!)[Switch / 3DS / Wii U] How To Make Your Own Amiibos[3DS] How To Unban 002-0102 After Playing Pokémon S/M Online[SMM2] Disconnect All Opponents (Online)[SMM2] Save Slot Teleporter v1.0 (Final)[TLoZ: BoTW] Paper Link[SMM2] Uploading TRULY IMPOSSIBLE Level![3DS] How To Install & Use Notehax (11.5, 100% FREE!)[MK7] Tag - New Custom Game Mode![MKWii] Wiimmfi Online Races #5[PKMN S/M] Coordinates Modifier / Freefly [DarkFlare]
DarkFlare |

[MK8] Configurable Rapidfire (Release)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER