tech 4tress
xposed framework on android lollipop 5.0.1 on nexus 4
updated
The link for github page is:
github.com/morrownr/8821cU-20210916
thanks to developer morrownr for updating the drivers regularly
The error is as follows
+0.000005] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+0.000002] us 3-3: Product: 802.11ac NIC
+0.000001] usb 3-3: Manufacturer: Realtek
+0.000001] usb 3-3: SerialNumber: 123456
+0.007299] Loading of unsigned module is rejected
fix is straight forward,
i disabled the secure boot option in Bios settings,
do access bios settings, keep tapping on delete while initial boot, then disable the secure boot, after that save the bios settings and reboot, this should make the drivers loaded properly, and wifi should start working
thanks for watching,
do like and subscribe
The calibration process consists of three steps. For the first step, use a white piece of paper. For the second step, place your thumb vertically on the sensor. For the third step, place your thumb horizontally on the sensor. After successful calibration, reboot your phone and test if you can add a new fingerprint.
If the fingerprint enrollment fails or stops midway, recalibrate the fingerprint using this method again. It should work after calibration.
credits for the method : thanks u/Remarkable-Force-359
Tools and replace meant parts used :
1) Hot air gun
2) B-7000 glue
3) Plastic pry tool
4) Hot Glue Gun
5) ISO Propyl Alcohol
6) USB Flex replacement
7) Replacement Sim tray
8) LCD replacement panel
if the screens glass is obliterated into pieces, do cover it with tap so as the glass pieces don't cause any damage.
if you want to know where I bought the parts from, do message me in the comments section below.
Post paid users can claim it,
Unlimited data without any data pack, this is an introductory offer.
you will need to claim it every month till the offer ends.
To claim this offer you will need to install airtel thanks app.
and hit on the Claim Unlimited 5G banner,
and wait for the activation message :)
you cant share the data by hotspot or tethering to other device, unlimited data can be used on that mobile only
My 15inch macbook pro is from mid 2015, its last official supported os is monterey, so in order to get the latest features such as continuity and universal control,
i will be using opencore patcher to spoof my macs SMBIOS to 2017 15 inch Macbook pro (Macbook pro 14,3)
you can then restart, hold option key during boot to access opencore boot menu and boot up the mac,get the latest update of ventura by checking the latest available update, and then update the os,
after every update you will need to use opencore patcher to patch the drivers.
to use continuity, your iphone should be a model after iphone xr, also should have the same apple id on both mac and your iphone, and connected to same wifi network.
open facetime, under video setting, you should be able to select iphone under video category.
For opencore app
github.com/dortania/OpenCore-Legacy-Patcher/releases
thanks so much for watching
When updating dji mavic mini 3 pro from 01.00.0450 to 01.00.0500
rc firmware from 01.02.0400 to 01.02.0600
app version on rc from 1.9.4 to 1.9.9
i continuosly got an error saying
"Server error. Wait a moment and try again(Code:0x1103a0090012)"
and update fails,
the solution is use DJI Asisstant 2(consumer edition)
link : dji.com/downloads/softwares/dji-assistant-2-consumer-drones-series
install DJI Assistant 2, need to give pemission from security and privacy menu in mac.
Power on the drone, connect it to mac, if latest firmware isnt available keep refreshing it, you will be shown the latest firmware, update your drone,
do the same for the rc, and you are good to go .
issue at hand :
when rotating left or right, the horizon doesnt get stabilized, the horizon axis keeps shiting left or right
solution:
calibrate compass
calibrate IMU
calibrate gimbal
you are good to go :)
thanks for watching
this eats up a lot of ram and battery
and constantly makes the phone become slow,
you can disable glance under lockscreen options in settings menu,
or you can uninstall the app by following the video or delete the app named wallpaper corousel.
link for download
r-studio.com/free-linux-recovery/Download.shtml
partitions formats supported :
ext4, ext3, ext2
from the video you can recover partition and files too
Download link for Davinci Resolve
blackmagicdesign.com/products/davinciresolve
The issue is Davinci Resolve Doesnt support most of the formats on linux
list of supported formats are as follows
documents.blackmagicdesign.com/SupportNotes/DaVinci_Resolve_16_Supported_Codec_List.pdf
you will need to convert your videos to a supported format using the following application
Avidemux : Video Output : Mpeg4 ASP (ff)
Audio Output : MP3 (lame)
Output Format: MOV Muxer
avidemux.sourceforge.net
Settings for converting videos to a format that support Davinci Resolve 18 Avidemux
Output Export Settings used for Davinci Resolve:
Format : Quicktime
Codec : DNxHR
Type: DNxHR 444 12-bit
The exported output is pretty large, you can use the following application to convert them to h264 which will reduce the size of exported project to usable size
Handbrake
install using flatpak
flatpak install fr.handbrake.ghb
settings used for conversion of Exported Video:
Preset : Official -- Production -- Production Max
Os used Pop OS
Error while installing python3.9-distutils:
E: Unable to locate package python3.9-distutils
E: Couldn't find any package by glob 'python3.9-distutils'
E: Couldn't find any package by regex 'python3.9-distutils'
Error on pycharm community edition when installing python modules:
error ModuleNotFoundError: No module named 'distutils.cmd'
Solution :
sudo add-apt-repository ppa:deadsnakes/ppa
sudo apt install python3.9-distutils
solution link:
askubuntu.com/questions/1239829/modulenotfounderror-no-module-named-distutils-util
Song: BVRNOUT - Take It Easy (feat. Mia Vaile) [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: http://ncs.io/TakeItEasy
Enable 5g on Iphone 12 13 14 for airtel network india update Iphone to the version 16.2 Only iphones greater than Iphone 12 has 5g support go to settings - software update, update to version 16.2 once the update is completed go to settings and enable 5g under settings - Mobile data - Options - Voice & Data - 5G ON if your area has Airtel 5G coverage you should see the 5G network icon beside network indicator in the status bar.
open the AppImage in terminal with ./appname.AppImage --no-sandbox
your application will start working, this is a temporary fix, and an update to fix the app should be on the way
Google is introducing a change with Android 13 that will prevent sideloaded/altstore apps from abusing the Accessibility APIs.
in order for these apps to access the restricted apis, we need to deliberately enable the access in the app info setting, click on the menu with 3 dots in the corner and the tap on Allow restricted settings, this will
this error occurs due to Deprecation of Python 2 in the latest Operating Systems (Monterey and other linux distros),
this can be solved by opening terminal and using command
for mac:
sed -i -e 's/=python /=python3 /g' ~/Library/Arduino15/packages/esp32/hardware/esp32/*/platform.txt
for linux :
sed -i -e 's/=python /=python3 /g' ~/.arduino15/packages/esp32/hardware/esp32/*/platform.txt
source
github.com/espressif/arduino-esp32/issues/4717
thanks for watching :)
note : This only works for chinese version, not the global one
link i bought it from :
item.taobao.com/item.htm?spm=a1z09.2.0.0.4e5a2e8d3nqTwC&id=658020146086&_u=o20bejiq3q346e
Download the firmware
github.com/YangWang92/AX6S-unlock
Decrypt your telnet password using your router password from
https://www.oxygen7.cn/miwifi/
for setup instruction and OpenWRT images
github.com/mikeeq/xiaomi_ax3200_openwrt
steps needed:
1.Setup your router
2.Downgrade the router to miwifi_rb03_firmware_stable_1.2.7
3.access telnet using the generated password
telnet 192.168.31.1
username: root
password: your password
4.enable ssh
# Enable SSH
nvram set ssh_en=1
# Add flags which allow you to recover from bad flashes without going back to the OEM firmware.
nvram set uart_en=1
nvram set boot_wait=on
nvram commit
sed -i '/flg_ssh.*release/ { :a; N; /fi/! ba };/return 0/d' /etc/init.d/dropbear
5. set ssh password for root
passwd root
6.Start SSHd
/etc/init.d/dropbear enable
/etc/init.d/dropbear start
7.test ssh connection
ssh root@192.168.31.1
8.Download openwrt images to mac/pc
mkdir -p xiaomi_openwrt_images
curl -L github.com/mikeeq/xiaomi_ax3200_openwrt/releases/download/v20220314/openwrt-mediatek-mt7622-xiaomi_redmi-router-ax6s-squashfs-factory.bin -o xiaomi_openwrt_images/factory.bin
9.Copy the downloaded folder to the router using scp
scp -r xiaomi_openwrt_images root@192.168.31.1:/tmp/
10.Ssh into the router and update
ssh root@192.168.31.1
cd /tmp/xiaomi_openwrt_images
#Set NVRAM flags
nvram set flag_boot_rootfs=0
nvram set "boot_fw1=run boot_rd_img;bootm"
nvram set flag_boot_success=1
nvram set flag_try_sys1_failed=0
nvram set flag_try_sys2_failed=0
nvram commit
11.Flash the firmware
mtd -r write factory.bin firmware
12.Connect your router to PC/Mac via ethernet cable, and log into admin panel using browser at
http://192.168.1.1
13.Setup the openWRT and connect the router to the internet, and enable wifi radios.
thanks so much for watching, do like and subscribe
00:13 Where i bought the Chinese version(cheapest) Not affiliated
00:27 Quick unbox
01:02 Download 1.2.7 firmware
01:25 Decrypt the telnet password
01:50 Initial setup
02:35 Access admin page to downgrade the router
03:04 Access the router through telnet and initial setup
03:54 Change root password and enable ssh
05:00 Download openWRT firmware to pc
05:12 Transfer openWRT firmware to the router using SCP
05:30 Go to the transferred directory and flash openWRT
05:55 Connect to router using Lan, and setup openWRT
The solution is pretty simple,
Go to Applications folder
Right click on Final Cut Pro app, and click on Show Package Content
then dive into Content folder,
then click on MacOs folder,
Double click on Final Cut Pro
your App should start,
this might be a temporary fix, try updating if you can :)
00:00 Intro
00:21 Prying Open the Housing
00:50 Remove the 2 Screws
01:15 Unplug the Fan and Heater Connectors
01:42 Cut the Adhesive Holding the PCB
2:00 Carefully Lift the PCB
2:57 Remove the 3rd Screw
3:35 Slide the PCB,Battery and Heatsink
4:08 How Reon Pocket 2 Works
5:00 How the Heating Functionality Works
Subscribe to Get Updates on the project on making a DIY Portable Aircon :)
follow the on screen installation to see how it's done
Download the latest magisk from
github.com/topjohnwu/Magisk/releases/tag/v24.1
Install magisk apk using phone or adb:
adb install Magisk-v24.1.apk
Reboot your phone to recovery :
adb reboot recovery
In recovery select install from sideload option and install magisk patch using:
adb sideload Magisk-v24.1.apk
after rebooting download safetynet-fix-v2.2.1.zip from:
github.com/kdrag0n/safetynet-fix/releases/tag/v2.2.1
select Hide the Magisk App option from Magisk settings.
enable Zygisk and Enforce denylist from Magisk settings, and select ur banking app under configure denylist.
install safetynet-fix-v2.2.1.zip from magisk modules tab, and reboot your phone,
safetynet should be passing now :)
if this module helped you in some manner do support the dev or project at
paypal.com/paypalme/kdrag0ndonate
patreon.com/kdrag0n
do like and subscribe if this video helped you
Xda thread for the rom
forum.xda-developers.com/t/unofficial-paranoid-android-sapphire-alpha-1-xiaomi-mix-4.4402065
developer : Jyotiraditya Panda
donation link : http://ko-fi.jyotiraditya.me
Telegram Odin testing group :
comment below for access
Mix 4 Telegram group :
https://t.me/Mix4GlobalOfficial
Mix 4 Photography group :
https://t.me/Mix4Photography
take a backup of your files,
unlocking will format your phone
Tools used :
mi unlock tool:
miuirom.xiaomi.com/rom/u1106245679/5.5.224.24/miflash_unlock-en-5.5.224.24.zip
15 secs adb tool:
forum.xda-developers.com/attachment.php?attachmentid=4623157&d=1540039037
International Rom:
sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-WEEKLY-RELEASES
thanks for watching, do like and subscribe
A free and cloudless replacement for your gadget vendors' closed source Android applications.
i am using it as a daily driver, and they gave recent support for mi band 6, and i am loving it
INFO
Gadgetbridge, an open-source app that focuses on removing the manufacturer out of the equation.Gadgetbridge is an android application that allows users to use various smart bands such as Pebble, Mi Band, Amazfit Bip, HPlus ZeBand, XWatch, and more, without constantly utilizing the vendor’s closed source application. It also does away with the need to create an account and transmit your user data to the vendor. What’s more, the open source nature of this app allows users to be confident about how their data is handled and ensure that it does not leave their devices. -- XDA
Changelog
0.57.0. Initial limited support for Mi Band 6
Thanks to a PR, we recently merged, Gadgetbridge 0.57.0 is the first release which supports the new Mi Band 6. We call support limited, since it does not yet support flashing the firmware or watchfaces and not everything is tested yet. But thanks to your donations we were able to order one, which will (once it arrives) enable us to test and improve device support! --Gadgetbridge team
Credits for the Mi band 6 support Jhey:
codeberg.org/jhey
link for built apk with mi band 6 support
drive.google.com/file/d/1gJmleH4-QisotX7GNAsxxSZXZjVU9505/view?usp=sharing
Your Mi band should be Connected to the Mi Fit App with your Mi Account, this is required to get the Bluetooth Authentication key for our MI Band which will used later in the process, also do not unpair from Mi fit app
step 1 : Building the app from source
Application home page
gadgetbridge.org
Install Android Studio
developer.android.com/studio
From Android Studio open SDK manager, download and install SDK 29(Android 10)
Install python3
python.org/downloads
Clone the repo to Downloads folder from this url
codeberg.org/Freeyourgadget/Gadgetbridge
Create a local.properties file in the Gadgetbridge folder
its contents should contain sdk location
sdk.dir = /Users/vamzi/Library/Android/sdk
Lets start with the APK build process
open Terminal, Change Directory to the gadget bridge folder using
cd ~/Downloads/gadgetbridge
and execute this command to start the build process
./gradlew assembleDebug
or
./gradlew assembleRelease
Step 2 : Obtaining the Authentication key
Clone the following Repo:
github.com/argrento/huami-token
Open terminal change directory to the cloned huami-token folder:
cd huami-token
Install the python dependencies using the following command:
pip3 install -r requirements.txt
Start obtaining the auth key :
python huami_token.py --method xiaomi --bt_keys
Copy the link generated under the script to a browser,
login to your MI Account which is bonded to our Mi band, copy the link generated after you login to the python terminal, and press enter
This will generate the Auth_Key copy it and save it.
send that authkey to your android device via mail or message
Step 3 : Install the Generated or Downloaded Gadget Bridge apk give all the required permissions and Notification access too,
Before we start the pairing process, disable or uninstall Mi Fit app, so it doesnt interrupt our GadgetBridge pairing proces.
on Gadget Bridge, start by tapping on the add button,
give the location access, as android needs location access to scan for bluetooth devices.
tap on Start discovery
this should display the Mi band 6 tap and hold on it, to start configuring the settings.
paste in the Authentication key and change other settings to your liking.
and tap on the back button, this will start the pairing process, and should add your mi band 6 to the application.
this app is a good alternative for the Mi Fit app, and this makes it possible to go thorough your health and activity stats on your device without the need to share it with the device manufacturer.
Donate to Gadget bridge Devs for making this awesome app
liberapay.com/Gadgetbridge/donate
and if you are good at coding,
Contributions are welcome, be it feedback, bug reports, documentation, translation, research or code. Feel free to work on any of the open issues; just leave a comment that you're working on one to avoid duplicated work. --devs at GadgetBridge
I pledge that all the money i get for this video, will send it directly to the GadgetBridge team :)
music first rain kontinuum, NCS release
Project Page
http://raywzy.com/Old_Photo
github page
github.com/microsoft/Bringing-Old-Photos-Back-to-Life
Requirements
Ubuntu with Nvidia GPUs and CUDA installed. Python=3.6
Install Nvidia Drivers with CUDA support
1.Select a driver repository for the CUDA Toolkit and add it.
curl -O http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1804/x86_64/cuda-repo-ubuntu1804_10.0.130-1_amd64.deb
sudo dpkg -i cuda-repo-ubuntu1804_10.0.130-1_amd64.deb
sudo apt-key adv --fetch-keys http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1804/x86_64/7fa2af80.pub
2.Update the package lists.
sudo apt-get update
3.Install CUDA, which includes the NVIDIA driver.
sudo apt-get install cuda
source:
cloud.google.com/compute/docs/gpus/install-drivers-gpu#ubuntu-driver-steps
reboot your system
Verifying the GPU driver install :
nvidia-smi
Download Anaconda for Linux installer
repo.anaconda.com/archive/Anaconda3-2020.07-Linux-x86_64.sh
get commands used from the github page
thanks so much
@inproceedings{wan2020bringing,
title={Bringing Old Photos Back to Life},
author={Wan, Ziyu and Zhang, Bo and Chen, Dongdong and Zhang, Pan and Chen, Dong and Liao, Jing and Wen, Fang},
booktitle={Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition},
pages={2747--2757},
year={2020}
}
Download the sample ssdt-gpu-spoof file
github.com/dortania/Getting-Started-With-ACPI/raw/master/extra-files/decompiled/SSDT-GPU-SPOOF.dsl.zip
Download iASL compiler
acpica.org/downloads/binary-tools
Download propertree (either git clone or zip download it)
github.com/corpnewt/ProperTree
process goes like this :
Boot into Windows OS on the same system,
open Device Manager ,
go to Display adapters -- AMD Radeon
right click and click on properties
go to Details tab and select Location paths
copy the ACPI address and convert as follows
ACPI(_SB_)#ACPI(PCI0)#ACPI(GPP8)#ACPI(X161) to
\_SB_.PCI0.GPP8.X161
use the above address and edit the downloaded SSDT-GPU-SPOOF.dsl as shown in the video
now that you have edited SSDT-GPU-SPOOF.dsl file, we need to convert that to SSDT-GPU-SPOOF.aml using the downloaded iASL.exe, open command prompt or power shell in the iASL folder, and use the command
iasl.exe SSDT-GPU-SPOOF.dsl
this will create SSDT-GPU-SPOOF.aml file
reboot to mac, copy SSDT-GPU-SPOOF.aml file to
BDU -- EFI -- OC -- ACPI folder
now that the spoofed SSDT file is copied to the opencore bootloader
we need to update the config.plist file
to do that open download ProperTree from the above link,
go to ProperTree folder, and double click on the ProperTree.command, it will not be opened at first, you need to go to Security & Preferences,
and click on Open anyway,
this will open the ProperTree app,
open bdu -- efi -- oc -- config.plist
then in the ProperTree select
file -- OC Clean Snapshot
and save it
after you restart your graphics card should work properly
for textual based tutorial :
dortania.github.io/OpenCore-Install-Guide/extras/spoof.html
Developer : Jason Antic github.com/jantic
Project page : github.com/jantic/DeOldify
Website : deoldify.ai
Try the app online at
deepai.org/machine-learning-model/colorizer
Hardware Required
Cuda enabled Nvidia Cards
Hardware and OS used
Ububntu 18.04 and Msi gtx 1070
Install Nvidia Drivers with CUDA support
1.Select a driver repository for the CUDA Toolkit and add it.
curl -O http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1804/x86_64/cuda-repo-ubuntu1804_10.0.130-1_amd64.deb
sudo dpkg -i cuda-repo-ubuntu1804_10.0.130-1_amd64.deb
sudo apt-key adv --fetch-keys http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1804/x86_64/7fa2af80.pub
2.Update the package lists.
sudo apt-get update
3.Install CUDA, which includes the NVIDIA driver.
sudo apt-get install cuda
source:
cloud.google.com/compute/docs/gpus/install-drivers-gpu#ubuntu-driver-steps
reboot your system
Verifying the GPU driver install :
nvidia-smi
Download Anaconda for Linux installer
repo.anaconda.com/archive/Anaconda3-2020.07-Linux-x86_64.sh
Download trained models
Stable Generator
dropbox.com/s/mwjep3vyqk5mkjc/ColorizeStable_gen.pth?dl=0
Commands used in the Video
#CLONEDEOLDIFY
git clone github.com/jantic/DeOldify.git DeOldify
go to cloned Deoldify folder using
cd DeOldify
#SETUPCONDAENV
conda env create -f environment.yml
#ACTIVATECONDAENV
conda activate deoldify
open jupyterlab using
jupyter lab
Connect keyboard and mouse for a better user experience
Download and install these apps from play store on the tv:
1. Send files to Tv
2. File manager
On your android phone, download and install
1. Send files to tv
2. F-droid.apk from f-droid.org
Connect your android device to the same wifi network as your Android tv,
send the apk to the Android tv using Send files to Tv app,
Install F-droid app on the tv using the file manager
open F-droid store,
wait for it to update the repo,
Search for the app UserLand, download the app and install it
open the UserLand app, and click on ubuntu from the list
enter the credentials for the ubuntu installation,
select ssh for now.
once the required files are installed you can access the ubuntu installation.
Thanks for watching and do subscribe and like the video if it has helped you
music credits
Song: Malik Bash - Ghosts [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: http://ncs.io/Ghosts
Watch: http://youtu.be/-9Z5Nhsm7GA
uninstall the available newpipe,
head on to their github page at
github.com/TeamNewPipe/NewPipe
get the latest available apk from their releases page
github.com/TeamNewPipe/NewPipe/releases
latest apk : NewPipe_v0.20.2.apk
install the apk, and you are good to go
Author:Meng-Li Shih, Shih-Yang Su, Johannes Kopf, Jia-Bin Huang
Paper : arxiv.org/pdf/2004.04727.pdf
Project website : shihmengli.github.io/3D-Photo-Inpainting
Implementation from github : github.com/vt-vl-lab/3d-photo-inpainting
a method for converting a single RGB-D input image into a 3D photo, i.e., a multi-layer representation for novel view synthesis that contains hallucinated color and depth structures in regions occluded in the original view.
command #installconda
conda create -n 3DP python=3.7 anaconda
command #source
source ~/.bashsrc
use command #1
conda create -n 3DP python=3.7 anaconda
use command #activateenv
conda activate 3DP
use command #installgit
sudo apt install git
use command #gitclone
git clone github.com/vt-vl-lab/3d-photo-inpainting
use command #basedirectory
cd Downloads/3d-photo-inpainting
use command #installpydependencies
pip install -r requirements.txt
use command #installpytorch
conda install pytorch==1.4.0 torchvision==0.5.0 cudatoolkit==10.1.243 -c pytorch
use command #downloadmodels
chmod +x download.sh
./download.sh
Installing GPU drivers
1.Select a driver repository for the CUDA Toolkit and add it.
curl -O http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1804/x86_64/cuda-repo-ubuntu1804_10.0.130-1_amd64.deb
sudo dpkg -i cuda-repo-ubuntu1804_10.0.130-1_amd64.deb
sudo apt-key adv --fetch-keys http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1804/x86_64/7fa2af80.pub
2.Update the package lists.
sudo apt-get update
3.Install CUDA, which includes the NVIDIA driver.
sudo apt-get install cuda
source:
cloud.google.com/compute/docs/gpus/install-drivers-gpu#ubuntu-driver-steps
reboot your system
Verifying the GPU driver install :
nvidia-smi
copy your images to the image folder
execute the following command from project folder(activate the 3dp environment)
command #startprocess :
python main.py --config argument.yml
https://buymeacoff.ee/oDbCfFNAJ
DeepLearning series Ep 5.1 : DeepFakes on Mac OS Catalina | CPU | April update | Torrent included
Blog post(torrent magnet link included)
https://tech4tress.xyz/2020/04/16/deepfakes-on-macintosh-deepfacelab-april-update/
zip files needed for this to work :
Source 1 :
www56.zippyshare.com/v/24XeRqlT/file.html
www56.zippyshare.com/v/gyuDPuHc/file.html
www56.zippyshare.com/v/OOuzJOkv/file.html
www56.zippyshare.com/v/RUbairzh/file.html
Source 2 :
http://www.mediafire.com/folder/pcspblv1kt3gs54,g4kguguz1qo35e3,uqjt83aumsnxqd7,fuxl2hrsa73r1s5/shared
Install Amphetamine from
apps.apple.com/in/app/amphetamine/id937984704?mt=12
Anaconda 2020.02 for macOS Installer Python 3.7 version
repo.anaconda.com/archive/Anaconda3-2020.02-MacOSX-x86_64.pkg
command #1
git clone github.com/iperov/DeepFaceLab
command #2
conda env create --file environment.yml
command #BASE_DIRECTORY
cd ~/Documents/deepfakes/Deepfacelab
Command #bash_profile_edit
nano ~/.bash_profile
Content #BASH_PROFILE
export LC_ALL=en_US.UTF-8
export LANG=en_US.UTF-8
Command #source_bash_profile
source ~/.bash_profile
command #Activate_Conda_env
conda activate tech4tress
command #BASE_DIRECTORY
cd ~/Documents/deepfakes/Deepfacelab
command #3
sh 1_extract_PNG_from_video_data_src.sh
command #4
sh 2_extract_PNG_from_video_data_dst.sh
command #5
sh 3_data_src_extract_faces_S3FD.sh
command #6
sh 4_data_dst_extract_faces_S3FD.sh
command #7
sh 5_train_Quick96.sh
command #8
sh 6_merge_Quick96.sh
command #9
sh 8_merge_to_mp4.sh
for lossless video
sh 7_merge_to_mp4_lossless.sh
this happened on my internal seagate hard drive
open Disk Management,
right click on the drive, and click on convert to GPT,
and you can now use the whole 4Tb drive space available,
next you can format the drive and use the newly formatted drive
thanks for watching
this happens when you connect your iphone in recovery directly,
the solution is pretty simple, what you need to do is connect your phone directly in normal mode(booted up), trust your laptop, then use the start option on the Checkra1n app, it will boot your iphone/ipad to recovery mode, and then use the on screen instructions to boot your device to dfu mode, this should jailbreak your IDevice.
thanks for watching
download and install both
MagiskHide Props Config and Busybox for android NDK modules from downloads, after installing reboot your phone.
Install terminal emulator from playstore
open terminal emulator
enter command :
su
Grant superuser access when prompted
type in command:
props
and follow the on screen options
select option 1 - edit device fingerprint
by typing : 1
then type in f to Pick a certified fingerprint
from the list pick your mobile manufacturer
select your mobile model
select the latest available android version
finally reboot your phone
this should fix the ctsProfile issue,
to use banking or wallet apps, hide magisk by using magisk hide option and select the app you want to hide root access from
do like and subscribe
music credits:
Song: Jim Yosef - Link [NCS Release]
credits :
Thread link for magisk hide props config module: forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
DEV for magisk hide props config module : Didgeridoohan
Reach him at : forum.xda-developers.com/member.php?u=4667597
you can donate him at : paypal.me/didgeridoohan
checkra1n:
https://checkra.in
Sandcastle scripts:
projectsandcastle.org
commands used:
in terminal
go to the extracted folder sandcastle(android-sandcastle) folder using
cd /path/to/folder
use following command to setup and download the android os
./setup_mac.sh
and use the following command to boot into the installed android os
./start_mac.sh
issues: currently only works on iphone 7 and iphone 7 plus
if you replaced the screen with oem touch and displays, touch input might not work
Credits:
twitter:twitter.com/qwertyoruiopz
checkra1n team for their awesome jailbreak and pongoos
Twitter: twitter.com/CorelliumHQ
Corellium for making it once again possible to install android on iphones
so save them before its too late
Command #1
cd ~/Documents/deepfakes/DeepFakesLab
https://buymeacoff.ee/oDbCfFNAJ
#deepfakesonmac
Check out the textual tutorial at
www.tech4tress.xyz
DeepLearning series Ep 5 : DeepFakes on Macintosh Catalina CPU ( 13 inch MacBook Pro 2013)
Install Amphetamine from
apps.apple.com/in/app/amphetamine/id937984704?mt=12
deepfacelab folder
password : tech4tress
www22.zippyshare.com/v/3aVqkYLz/file.html
mediafire.com/file/wj78khxtrd61ajt/DeepFaceLab.7z/file
some people were facing error while extracting the zip with password, so here is a zip with password disabled
www13.zippyshare.com/v/gOPgEQEN/file.html
mediafire.com/file/5vv47s830qhuavw/DeepFaceLab_Tech4tress.zip/file
Test files used in the video
www63.zippyshare.com/v/qOreuIZq/file.html
Download and install Anaconda python 3.7 from
repo.anaconda.com/archive/Anaconda3-2019.10-MacOSX-x86_64.pkg
Download DeepFaceLab from
github.com/iperov/DeepFaceLab
and extract the conetents of Deepfacelab-master zip file to Documents/deepfakes/DeepFaceLab
Commands used:
Command #base-directory
cd Documents/deepfakes/DeepFaceLab
Command #1
conda create -n deepfakes python=3.6
Command #2
conda activate deepfakes
Command #3
pip install -r requirements-cpu.txt
Command #4
conda install pytorch torchvision -c soumith
Command #4.1:for people with errors in ffmpeg commands
conda install -c conda-forge ffmpeg
Credits:Amien Phillips
Command #bash_profile_edit
nano ~/.bash_profile
Content #BASH_PROFILE
export LC_ALL=en_US.UTF-8
export LANG=en_US.UTF-8
Command #source_bash_profile
source ~/.bash_profile
Command #5 : Extract data_src frames from Video
python main.py videoed extract-video --input-file WORKSPACE/data_src.mp4 --output-dir WORKSPACE/data_src
Command #6 : Extract data_dst frames from Video
python main.py videoed extract-video --input-file WORKSPACE/data_dst.mp4 --output-dir WORKSPACE/data_dst
Command #7 : Extract faces from data_src video
python main.py extract --input-dir WORKSPACE/data_src --output-dir WORKSPACE/data_src/aligned --detector mt --cpu-only
Command #8 : Extract faces from data_src video
python main.py extract --input-dir WORKSPACE/data_dst --output-dir WORKSPACE/data_dst/aligned --detector mt --cpu-only
Clear the extracted faces which arent clear enough
Command #9 : Train the model using the extracted images
python main.py train --training-data-src-dir WORKSPACE/data_src/aligned --training-data-dst-dir WORKSPACE/data_dst/aligned --model-dir WORKSPACE/model --model DF --cpu-only
Command #10 : Swap the faces from data_dst videos frames
python main.py convert --input-dir WORKSPACE/data_dst --output-dir WORKSPACE/data_dst/merged --aligned-dir WORKSPACE/data_dst/aligned --model-dir WORKSPACE/model --model DF --cpu-only
Command #11 : Convert the frames to video
python main.py videoed video-from-sequence --input-dir WORKSPACE/data_dst/merged --output-file WORKSPACE/result.mp4 --reference-file WORKSPACE/data_dst.*
links that helped me in the process
coderwall.com/p/-k_93g/mac-os-x-valueerror-unknown-locale-utf-8-in-python
medium.com/@debarko/how-to-install-pytorch-on-a-mac-os-x-97a79e28c70
credits:
bgm - Jim Yosef - Eclipse [NCS Release]
youtube.com/watch?v=1WP_YLn1D1c
sudo spctl --master-disable
this should allow you to open the Checkra1n.dmg file
if checkra1n does not open and crashes on start,
then right click on the checkra1n icon, and click on show package content,
and navigate to content - MacOS
and click on checkra1n_gui
this should start the application
once you are done with using the application, it is advisable to re-enable gatekeeper by using the command
sudo spctl --master-enable
thanks for watching, do like and subscribe if this video helped you
go to Content and then to Mac OS folder,
double click on Adobe Photoshop CS6 app,
this will start the application
music credits :
NCS http://ncs.io/firstrain
https://buymeacoff.ee/oDbCfFNAJ
DeepLearning series Ep 4 : DeepFakes on Linux - Using FaceSwap App on Ubuntu
In this video i will walk you through how to setup and use FaceSwap application on Ubuntu operating system, if you are having nvidia gtx graphics card, this video is for you, you can use cuda cores on ubuntu too, the best part about this app is you will have a graphical user interface which will be easier for most of the people
first you will need to install anaconda for linux, you can find that from this link:
anaconda.com/distribution
after downloading open terminal to download folder and use this command to install it
sh ./Anaconda*.sh
this will install the Anaconda distribution
open Anaconda-Navigator and create a python environment with version 3.6, open the environment,
Clone the faceSwap repo using the following command
git clone --depth 1 github.com/deepfakes/faceswap.git
once the repo is cloned, change the directory to faceswap folder using
cd faceswap
now that you are in faceswap folder, use the following command to install the application:
python setup.py
during installation process, you will be prompted with multiple installation options, answer them according to your setup.
once the installations completed,
open the installed faceswap using the command
python faceswap.py gui
this will open the FaceSwap application,
follow the on screen instructions to know how to use it,
if you guys loved this video do give a thumbs up and subscribe,
also if you have any doubts do shoot em up in the comments section below
background music: unision aperture(NCS release)
error description:
You can't use this version of application "Adobe After Effects CS6" with this version of macOS (Mojave)
updated link :
drive.google.com/file/d/1iF9w2bLgcY0wN4rRs2-U03fUAJmuwXqw/view?usp=sharing
Adobe After Effects 11.0 quit unexpectedly.
Click Reopen to open the application again. Click report to see more detailed information and send a report to apple.
After Effects Alert
Last log message was: (43833880640) (AppDirs) (5) Required Dir = /Applications/Adobe After Effects CS6/Adobe After Effects CS6/Contents/Required
Generating crash log, which may take a few minutes
Download this patch Adobe After Effects CS6 11.0.4 Update
supportdownloads.adobe.com/detail.jsp?ftpID=5696
install it and u are good to go.
thanks for watching and do take time and mention if it work in the comments section below
https://buymeacoff.ee/oDbCfFNAJ
DeepLearning series Ep 3 : DeepFaking without a Graphics Card - Deepfacelab CPU Walkthrough
In this video i will walk you through how to download and use the deepfacelab CPU version, the best part is you dont have to have any graphics card, only back drop is that it will take more than a day to train the model, will suggest you the hardware required, and finally will help you with the total work flow right from extracting frames and faces to training and then swapping the faces and creating the final video
link for downloading the application(Updated):
cpu version DeepFaceLabOpenCLSSE - for AMD/IntelHD cards and any 64-bit CPU(updated link)
drive.google.com/file/d/1Omx-johx5m6WFSn36vJ3bEx4nlZzJ4Rw/view
Trained model cpu 30hrs:
drive.google.com/file/d/1voeSvN_lLXvsmjqlVHs0CNpYA7J6HDOD/view?usp=sharing
Hardware requirement :
Any CPU is fine, A powerful CPU will decrease the time required for training model.
my Hardware config :
Razer Blade Stealth i7 6700
8gb ram
time taken for training the model:
30 hours
follow the on screen instructions, and if you need any assistance,
ask them in the comments section below
background music: unision aperture(NCS release)
this is what i got when i tried installing Adobe Photoshop CS6 on my macintosh
We've encountered the following issues
Installer failed to initialize. This could be due to missing file. Please download Adobe Support Advisor to detect the problem.
solutions pretty simple right click on the installer,
open "show contents of the package",
then go to Contents/MacOs,
execute the Install script and you are good to go..
if this solution has helped please take a small amount your time to click the thumbs up and also mention it in the comments for the world to know.....
if possible do subscribe :)
in this video i will walk you through how to install the required dependencies, hardware needed(can run mostly on all computers),and help you run DeepCreamPy to run and un-censor anime or hentai blurred images
if this video has helped you or if you wish to support me further,Do consider buying me a coffee at:
https://buymeacoff.ee/oDbCfFNAJ
:)
github page:
github.com/deeppomf/DeepCreamPy
found that the owner has lost his laptop, so he had deleted the whole project and deleted the repo, alternative repos are here
github.com/liaoxiong3x/DeepCreamPy
download the latest release:
github.com/deeppomf/DeepCreamPy/releases/tag/v1.3.0-beta
similarly
github.com/liaoxiong3x/DeepCreamPy/releases/tag/v1.2.3-beta
trained models
drive.google.com/drive/folders/1_A0xFeJhrqpmulA6cC-a7RxJoQOD2RKm
and finally download the application from the following link
drive.google.com/file/d/11PDshQQ3TqgeNCGK7IGc22Kj41PN5HEy/view?usp=sharing
dev used this project and modified it:
Partial Convolutions for Image Inpainting using Keras
github.com/MathiasGruber/PConv-Keras
Data Set used for training the neural network:
Danbooru2018
gwern.net/Danbooru2018
software dependencies:
Visual C++ Redistributable for Visual Studio 2015 Update 3
microsoft.com/en-us/download/details.aspx?id=53587
******************************************
DeepLearning series Ep 1 : DeepFaceLab Installation and Workflow TUTORIAL
youtube.com/watch?v=nboXZlXGFWM
background music: unision aperture(NCS release)
In this video i will walk you through how to install the dependencies required, hardware suggestions, and finally will help you with the total work flow right from extracting frames and faces to training and then swapping the faces and creating the final video
**UPDATE** as per the developer of the app , you dont need to install cuda 9 and cuDNN in the app, and all you would need are the drivers for the nvidia gpu.
Models used
Source: Robert Downey JR (Iron Man stage show)
Destination : shia lebouf(do it video)
training algo used : defaker
model trained for 14 hours
github page
github.com/iperov/DeepFaceLab
software dependencies:
cuda 9.0:
developer.nvidia.com/cuda-90-download-archive
cuDNN 7.0:
developer.nvidia.com/rdp/cudnn-archive
if you guys are not having access to gpu, try this video:
youtube.com/watch?v=QFjhnJcFdZk
background music: unision aperture(NCS release)
Links and Commands Used:
tumblr-crawler:
github.com/dixudx/tumblr-crawler
python:
python.org/downloads
command to install the required dependencies:
go to the tumblr-crawler folder,
use the following command
pip install -r requirements.txt
after adding the blog names to sites.txt,
start the ripping process, by using the command
python tumblr-photo-video-ripper.py
music credits:
bensound.com
thank the dev for this awesome crawler at:
github.com/dixudx
https://buymeacoff.ee/oDbCfFNAJ
ETH: 0x1fcbBBa480b4c116cc37924353F93D26365B2303
Fixing IPhone error "message not sent"
One of the reasons for this error to occur is that the message center number of your carrier isn't set correctly!
to set that follow this
Change the SMS Centre Number
From the home screen, tap Phone.
1. If the dial pad is not visible, tap Keypad.
2. Enter *#5005*7672#, then tap Call.
3. The current SMSC setting is shown on the screen.
Tap Dismiss.
4. If the SMSC number needs changing, enter
**5005*7672*SMSCNUMBER#, (where SMSCNUMBER is replaced with the correct SMSC number in full international format).
5. Tap Call.
The message "Setting succeeded, Service Centre Address, No Address" will appear on screen.
6. Tap Dismiss.
7. Enter *#5005*7672# then tap Call.
The new SMSC number will be shown on the screen.
So follow the video to set it right to solve the problem
sources:http://ee.co.uk/help/phones-and-device/apple/apple-iphone-6/apple-iphone-6-calls-messaging-and-email/iphone-6---change-the-sms-centre-number
so i had to do this to find the serial number for my rma
i had to produce the proof of ownership by submitting the bill, i lost the bill to, wd support asked me to crack open the drive to send them the serial number(only open the exterior case, on their request or you will loose your warranty), they gave me the rma request form.
sent my drive for rma, will update how it went
hope it helps you
For Windows OS:
command used in command prompt
wmic diskdrive get serialnumber
For Macintosh OS:
download wd disk utility from,
support.wdc.com/downloads.aspx?p=157
open wd disk utility,
hover your mouse on the hd icon,
get serial number
thanks for tuning in
-------------------------------------------------------------------------------------------------------
Song: Ship Wrek, Zookeepers & Trauzers - Vessel [NCS Release]
Music provided by NoCopyrightSounds.
Watch: youtu.be/PXf4rkguwDI
Download/Stream: http://ncs.io/VesselCr
as the latest version of mac os (mojava) isnt supported by devices made prior to 2012, i had to find the download link to high sierra and then use it to manually update my mid 2011 imac to high sierra.
my old i mac was running osx 10.8.5
the itunes link is as follows
support.apple.com/macos/high-sierra
music credits bensound


