Charlie DIYte (CharlieDIYte)How I recently converted my 25 year old hybrid mountain bike into an e-bike using a 250w Yosepower e-bike conversion kit (rear motor kit for cassette).
There's a Black Friday sale running from 11th to 24th November, so click on the following links to get started, and don't forget to apply my DISCOUNT CODE: CHARLIEDIYTE
*By buying through the above links I do receive a small commission which helps me to keep making this content.
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
0:00 Introduction 1:33 Buyers Guide 3:01 Freewheel Installation 4:16 Tyre Installation 4:21 Wheel Installation 4:32 Brake Lever & Throttle 5:23 Display Installation 5:39 PAS Sensor Install 6:42 Battery Installation 7:43 Panier Installation 7:51 Connecting the cables 8:38 New Seat 8:45 How it works 11:00 Throttle lever 12:10 The Big Road Test 18:00 Conclusions 20:18 Subscribe to Me!
TODAY'S TOOLKIT: - Adjustable spanner
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
How to DIY Convert an Old Bike to ELECTRIC - with the Yosepower E-bike Conversion KitCharlie DIYte (CharlieDIYte)2023-11-12 | How I recently converted my 25 year old hybrid mountain bike into an e-bike using a 250w Yosepower e-bike conversion kit (rear motor kit for cassette).
There's a Black Friday sale running from 11th to 24th November, so click on the following links to get started, and don't forget to apply my DISCOUNT CODE: CHARLIEDIYTE
*By buying through the above links I do receive a small commission which helps me to keep making this content.
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
0:00 Introduction 1:33 Buyers Guide 3:01 Freewheel Installation 4:16 Tyre Installation 4:21 Wheel Installation 4:32 Brake Lever & Throttle 5:23 Display Installation 5:39 PAS Sensor Install 6:42 Battery Installation 7:43 Panier Installation 7:51 Connecting the cables 8:38 New Seat 8:45 How it works 11:00 Throttle lever 12:10 The Big Road Test 18:00 Conclusions 20:18 Subscribe to Me!
TODAY'S TOOLKIT: - Adjustable spanner
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#ebike #conversionkit #yosepowerThe Ultimate Easy to Use Exterior Wood PaintCharlie DIYte (CharlieDIYte)2024-10-20 | A year ago I painted my front door with a high quality paint that's durable, won't flake or peel, is highly water resistant and made from sustainable raw materials AND the best bit - it's SO EASY TO APPLY because it doesn't need primers undercoats and top coats. You just paint it on and it sinks into the wood.
In today's video I talk you through how I treated an unpainted door with this Treatex paint system, and how it's doing one year on.
I would be so grateful if you Joined my Channel: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or
- BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
0:00 Introduction 2:58 Treatex introduction 4:08 The Door 5:02 The Preservative 5:16 Painting the Door 6:19 One Year Update 8:34 Repainting the Door 10:14 Conclusions 13:54 Subscribe to Me!
TODAY'S TOOLKIT*: - Treatex website treatex.co.uk ** DON'T FORGET THE OFFER CODE CDIY7.5 FOR A 7.5% DISCOUNT - Ronseal 2 part wood filler amzn.to/4eH8RRn - Bedec Barn Door Paint amzn.to/3UfZRuo
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
LET'S CONNECT! Charlie DIYte -- patreon.com/charlieDIYte -- Email: charliediyte@gmail.com -- facebook.com/charliediyte -- Web: charliediyte.co.uk -- instagram.com/charliediyte #diy #painting #exteriorHow to Fix Plasterboard with Expanding Foam AdhesiveCharlie DIYte (CharlieDIYte)2024-10-13 | How I fixed the plasterboard in my kitchen using expanding foam adhesive. In today's video I run through the advantages and disadvantages of using expanding foam adhesive to fix plasterboard to walls and explain why it's so much better than using driwall adhesive.
I would be so grateful if you Joined my Channel: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or
- BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
0:00 Introduction 0:33 Why use Adhesive Foam 5:42 How to Use It 11:27 Summary 12:56 Subscribe to Me!
I would be so grateful if you Joined my Channel: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or
- BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
0:00 Introduction 0:55 Background 3:27 Dog Shower Installation 14:40 Conclusion 16:09 Subscribe to Me!
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases. SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
I would be so grateful if you Joined my Channel: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or
- BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
0:00 Introduction 0:31 Why Expanding Foam 1:58 Today's Toolkit 3:09 Internal Corners 4:29 Gluing the First Board 8:18 External Corners 10:40 Gluing with no nails or screws 13:46 Conclusions 14:55 Subscribe to Me!
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases. SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
I would be so grateful if you Joined my Channel: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or
- BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
0:00 Introduction 0:50 2021 Replacement Lid 1:58 Does PIR work 2:37 Insulation Options 4:40 Refurbishing my Lid 6:40 Conclusions 9:53 Subscribe to Me!
My son loved it so much he wanted one for his mountain bike which he plans to do food deliveries on when he's not at college.
So here's how I got on converting his bike.How to Install Large Format Tiles - a Complete DIY GuideCharlie DIYte (CharlieDIYte)2024-09-06 | How I installed Large Format Tiles in my kitchen - a complete DIY Guide.
With minimal experience laying tiles and with everyone telling me I was mad because this was a job for the pros I ignored them and decided to learn everything I could in order to do the best possible job of laying large format tiles in my kitchen. I think I did a pretty decent job so today's video is all about passing on to you everything I learnt in the hope that you can do something similar, armed with my knowledge.
I would be so grateful if you Joined my Channel: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or
- BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
0:00 Introduction 1:19 Decoupling Layer 4:01 Prepwork 5:16 Bonding the Decoupling Layer to Floor 8:38 Large Format Tiles 9:24 Choosing the Colour 9:48 Positioning the Tiles 11:24 Today's Toolkit 13:16 Importance of a Tool Cleaning 14:02 Laying the Tiles 14:17 Tile Cutting 15:59 Cutting Blade 18:29 Applying the Adhesive 20:33 Tile laying technique 23:10 Keeping everything level 27:03 Delta Levelling system 28:08 Cleaning the Grout Joints 28:54 Aluminium profile 29:29 Sunken Mat 30:12 How Long 31:11 Grouting 31:39 Which Grout? 36:53 Subscribe to Me!
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases. SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#garden #lights #installHow to Silicone Tricky GapsCharlie DIYte (CharlieDIYte)2024-08-24 | How I siliconed a tricky gap in our kitchen and also fixed an external leak on our bifold doors with silicone and expanding foam.
I would be so grateful if you Joined my Channel: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or
- BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
I would be so grateful if you Joined my Channel: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or
- BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases. SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
I would be so grateful if you Joined my Channel: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or
- BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
0:00 Introduction 0:39 Tool Kit 1:09 Sourcing the wood 2:44 Planning the Assembly 3:42 Routing the Mortices 7:19 Making the Tenons 7:40 Making the Bar Clamps 8:22 The Assembly 11:32 Cleaning & Sanding 12:05 Construction 12:33 Weatherproofing 15:35 Repairs 15:56 Feet 16:20 Cushions 17:06 Conclusions 17:51 Subscribe to Me!
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases. SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
I would be so grateful if you Joined my Channel: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or
- BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
0:00 Introduction 0:34 Background 0:45 When to sow your Lawn 1:11 Preparing the Ground 5:09 Timing the Grass Spreading 7:04 Watering 8:11 Patchy Areas 7:44 Connecting the Lights 8:38 Mowing 10:12 Subscribe to Me!
#garden #lights #installHow to DIY Install Garden LightingCharlie DIYte (CharlieDIYte)2024-07-12 | How I DIY installed a 24v plug and play garden lighting system including motion activated staircase lighting. In today's video I will be showing you how you can install your own lighting system and as its 24v it's super safe and doesn't require extensive excavations or an electrician.
Join my Chanel here: - DIYte PATRON patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum; or - BUY ME A COFFEE bit.ly/3xuQ3zb if you fancy buying me a coffee to help me keep making this free content - you can also join my Discord here too, if you don't like Patreon :)
0:00 Introduction 1:35 How it Works 2:03 Fusebox Cupboard 4:08 Choosing your System 5:38 Today's Toolkit 6:07 Placing the Lights 6:31 Laying the Cables 7:44 Connecting the Lights 10:45 Zigbee Remote 13:17 Motion Sensor 14:44 Smik Gateway 22:21 Subscribe to Me!
TODAY'S TOOLKIT*: - Techfast heavy duty timber to steel screws 5.5 x 60mm amzn.to/3wsL8DH - - SKIL 3225 20v Impact Driver bit.ly/464MS2j
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases. SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases. SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
So after years of trying out different internal wall insulation systems at my old victorian cottage (which has no cavity walls) I recently decided it was time to find a more appropriate, breathable system. After exhaustive research I came up with what I think is the perfect retrofit internal wall insulation system. In today's video I explain why I went for the SWIP system, what it's benefits are and how I got on installing it.
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
0:00 Introduction 0:29 Background 2:02 External Wall Insulation 3:47 Internal Wall Insulation 6:27 SWIP IWI System 8:34 Patreon membership 9:40 Install of my IWI 9:47 Prepwork 10:07 SWIP Studs 12:49 Internal Corners 12:58 Reveals 13:36 Ceilings 14:04 Sockets & Pipework 14:24 SWIP Batt Insulation 14:58 Vapour Control Layer 16:34 Insulating the Reveals 19:22 Pricing 20:07 Subscribe to Me!
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases. SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#internal #wall #insulationHow to Cut Large Format Porcelain Tiles #shortsCharlie DIYte (CharlieDIYte)2024-04-10 | Well I messed up today cutting two large porcelain tiles but quickly realised why.
So I thought I'd let you know what went wrong. It's really annoying because I've cut all of the rest of the kitchen floor tiles flawlessly but the problem is I took a two week break and kind of forgot what made what I was doing so successful. And since then we've had a load of rain and the pallet I was cutting the tiles on has swelled and is no longer flat. And that's where the problem came. I'm really low on tiles and now I'm going to have to buy some more because I snapped the first two tiles that I cut.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#tile #cutting #TEAMSKILHow to Find Cables in The Ceiling #shortsCharlie DIYte (CharlieDIYte)2024-04-03 | How I used a cheap endoscope to find electric cables in my ceiling.
I bought it because although I had carefully marked where the cables were on a plan, if they're slightly out of reach of your fingers you literally don't know where they are. This happened and we had to take down a piece of plasterboard to find them, so I decided to buy an endoscope to solve the problem. It's been a lifesaver - my electrician has also bought one. It connects to your phone by WIFI even though it's also powered by a cable you plug into your phone - not sure why they need the WIFI, but you do NOT need to be on a WIFI network to use it. My electrician was wondering this (he's bought one) and so we switched off my wifi network and I was still able to connect it up.
This is the endoscope I bought geni.us/ZhIFp (Amazon)*
* The Amazon link above is an affiliate link. It doesn't cost you anything to click on it but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#endoscope #cable #finderWhy Ive Been Away - Super Massive Kitchen UpdateCharlie DIYte (CharlieDIYte)2024-04-01 | Why I've been away from YouTube and a massive update on the kitchen renovation.
In today's video I run through what I've been up to over the last 4 months, in particular - front door install - building regs issues - internal wall breathable insulation system - ceiling sound insulation - plumbing - cabling
TODAY'S TOOLKIT*: - More tools to follow - SKIL 3851 CA PWRCORE20 sds DRILL (not currently available in UK) - SKIL 3225 20v Impact Driver bit.ly/464MS2j
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#kitchen #update #DIYThe Best Way to Insulate around Windows #shortsCharlie DIYte (CharlieDIYte)2024-03-27 | How I insulated the window reveals in my kitchen renovation - as part of the installation of a breathable internal wall insulation system.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#wall #insulation #TEAMSKILWhat Garden Lights to Install? #shortsCharlie DIYte (CharlieDIYte)2024-02-13 | A quick run through of What Garden Lights I will be Installing very soon - in our remodelled garden.
Today's Toolkit You can view the full @PaulmannLighting outdoor lighting range here bit.ly/3SXBSzY
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#garden #lights #installHow to use telescopic stud and joist brackets to fix electrical back boxes and pipes in stud wallsCharlie DIYte (CharlieDIYte)2024-01-24 | How to use telescopic stud and joist brackets to fix electrical back boxes and pipes behind plasterboard walls.
#stud #joist #bracketsLeaking Gutter Fix #shortsCharlie DIYte (CharlieDIYte)2024-01-03 | How I did a temporary fix to a leaking gutter that was causing a lot of damp.
Today's Toolkit - flanged button head bolts, washers and nuts bit.ly/3vnhzT8
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#gutter #leaking #fixHow to Install Underfloor Heating in an Old PropertyCharlie DIYte (CharlieDIYte)2024-01-01 | How I installed a water based underfloor heating system in my old property, from insulating the floor, to installing the pipes and manifold, and what screed I chose.
This is the second video in the series. The first video is here bit.ly/48kvoAq
I knew very little about underfloor heating before I started this project and I've pretty much installed the entire thing myself. I've learnt a lot along the way and I'm hoping you can too, from watching this vid.
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
0:00 Introduction 1:05 Water Main Prep Work 1:32 Pipes Through the Brickwork 2:30 Insulating the Floor 7:07 Laminon membrane 8:31 Choosing your UFH System 10:20 Installing the System 16:10 Flow & Return Pipes 19:15 Filling the System 22:34 Drayton Underfloor Heating Controller 22:42 Choosing your Screed 25:50 System Performance 27:51 Drayton Wiser integration 28:27 Subscribe to Me!
#underfloor #heating #installTap Valve Replacement #shortsCharlie DIYte (CharlieDIYte)2023-12-20 | In this Short I show you how to repair or replace a faulty tap valve.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#tap #valve #replacementIs This the Best Exterior Wood Paint??Charlie DIYte (CharlieDIYte)2023-12-10 | I recently discovered Bedec Barn paint and I think it's the best exterior wood paint. I recently used it to paint my old and new fascias.
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
0:00 Introduction 0:33 Protecting outdoor woodwork 5:39 Subscribe to Me!
#exterior #paint #BedecHow to Adjust a Front Door Strike Plate #shortsCharlie DIYte (CharlieDIYte)2023-12-01 | How I did a quick and simple mod on a badly installed forend strike plate to stop the door bolt catching it.
The obvious thing to do was lower the forend strike plate but this involved pegging each screw hole, chiselling the door frame and filling the gap left from moving the strike plate. By far the easiest option was to trim a couple of mms from the bottom of the strike plate, which I did using my Black & Decker power file and Dremel.
Today's Toolkit* - Black & Decker power file amzn.to/3Nuqsk7 - Dremel amzn.to/3N6PS6U includes engraving/carving bit featured in vid
* The Amazon link above is an affiliate link. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#door #strikeplate #adjustmentCan You Repaint Windows Without Priming?Charlie DIYte (CharlieDIYte)2023-11-25 | How I set out to find the easiest way to repaint my windows - using Zinsser ALLCOAT - and how I got on. Can you repaint windows without priming?
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
0:00 Introduction 0:57 Why Zinsser Allcoat? 2:28 Prepwork 7:35 The Installation 9:53 Conclusions 13:36 Subscribe to Me!
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases. SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#repaint #windows #diyWhy you Need a NON-STICK Expanding Foam Gun #shortsCharlie DIYte (CharlieDIYte)2023-11-15 | Why you need an expanding foam gun and why it MUST BE NON-STICK!
#expanding #foamgun #non-stickHow to Remove a Snapped SDS Drill Bit #shortsCharlie DIYte (CharlieDIYte)2023-11-08 | I didn't know how I was going to get a snapped drill bit out of my SDS drill chuck and then came up with a cunning hack for removing it.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#SDS #drillbit #removalHow to Repair Metal #shortsCharlie DIYte (CharlieDIYte)2023-11-02 | How I repaired a cracked cast iron hopper using Milliput epoxy putty - and saved myself hundreds of pounds.
#milliput #metal #repairOven Plastic Knob Repair #shortsCharlie DIYte (CharlieDIYte)2023-10-26 | How I repaired the broken plastic knobs on our Belling oven. I've bought new knobs so many times but the poor design means they keep breaking so I thought I'd do a more permanent repair myself.
Join the WeShop shopping revolution here https://app.we.shop/join-charliewhite, and start earning shares (20% of the value of what you buy) every time you shop. Also check out my exclusive posts under my Profile.
** As a founder influencer on WeShop I do earn a small referral commission if you sign up using this link and my username.
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#masonry #creme #waterproofPatio Pointing - Dont Use Resin Jointing Compound! #shortsCharlie DIYte (CharlieDIYte)2023-10-11 | The mistakes I've made pointing my patio with a resin mortar jointing compound.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
Go to bit.ly/3LMeH7K to get a FREE 1-year supply of Vitamin D3+K2 and 5 AG1 travel packs with your first purchase. Thanks to AG1 for sponsoring today's video!
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
0:00 Introduction 0:36 Background 2:48 Patio Bedding Layer 4:02 Patio Pattern 4:54 Paving up to House 6:24 The Big Mistake 7:44 Today's Toolkit 8:02 Site Prepwork 9:14 Filling the Joints 13:12 Cleaning the Surface 13:43 After Treatment 14:06 The Problems 15:26 Other Products 17:57 Conclusions 19:14 Subscribe to Me!
TODAY'S TOOLKIT: - Ansell Work Glove Store amzn.to/3PWkcnd - AG1 drinkAG1/charliediyte or bit.ly/3LMeH7K - A-Joint Ready https://a-joint.de/en/services/a_join... - Stanley Knife - 12mm tuck pointer geni.us/dwv3 (Amazon) - Spear & Jackson trowel geni.us/Tl0pLB (Amazon) - soft bristle brush geni.us/awOufCs (Amazon) - De Walt kneepads geni.us/vycsFjW (Amazon) although these also look pretty good geni.us/bbkmFrQ (Amazon) and my DeWalt clips have failed so velcro might be a better option
Join the WeShop shopping revolution here https://app.we.shop/join-charliewhite, and start earning shares (20% of the value of what you buy) every time you shop. Also check out my exclusive posts under my Profile. ** As a founder influencer on WeShop I do earn a small referral commission if you sign up using this link and my username.
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#patio #grouting #DIYCloseboard Fence BuildCharlie DIYte (CharlieDIYte)2023-09-24 | How I built a closeboard fence with arris rails and v notch posts and why these fences are such a great option.
BRAND AMBASSADORSHIP I'm currently partnering with Ansell whose gloves I've been using for over a year now. Bottom line, I've loved using them long before our tie up so this is a great collaboration that helps support my channel. You can see the gloves I've worn in this video here: - Ansell Store amzn.to/3PWkcnd
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
Join the WeShop shopping revolution here https://app.we.shop/join-charliewhite, and start earning shares (20% of the value of what you buy) every time you shop. Also check out my exclusive posts under my Profile.** As a founder influencer on WeShop I do earn a small referral commission if you sign up using this link and my username.
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#fence #closeboard #DIYHow to DIY Install the Ultimate Gravel PathCharlie DIYte (CharlieDIYte)2023-08-26 | How I DIY installed the ultimate gravel path using mesh stabilisation grids that stop the gravel moving. This is the second path I've installed in the last year so I'll be looking back on the old path to see how it's weathered and what I've improved (if anything) this time round.
BRAND AMBASSADORSHIP I'm currently partnering with Ansell whose gloves I've been using for over a year now. Bottom line, I've loved using them long before our tie up so this is a great collaboration that helps support my channel. You can see the gloves I've worn in this video here: - Ansell Store amzn.to/3PWkcnd
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
TODAY'S TOOLKIT: - Ansell Work Glove Store amzn.to/3PWkcnd - Nidagravel bit.ly/3tvPJD6 Get a 5% DISCOUNT off your order by applying the code CHARLIEDIY5 at checkout - Speak & Jackson steel trench shovel amzn.to/3VT3ju7 - Wheel barrow amzn.to/3syqu2s - MOT Type 1 Sub Base 2 x 1 ton bulk bags - 1 ton bulk bag sharp sand - 1 ton bulk bag golden gravel 10mm - Weed matting amzn.to/3Dt6iCs - Evolution Hulk Wacker Plate bit.ly/3DqNXFP - Roughneck soil tamper amzn.to/3sB8jsU - Outdoor broom amzn.to/45vj52D
USEFUL LINKS - How to Install Gravel Stabilisation Grids bit.ly/3FbPmS2
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#path #gravel #installationStarlink Update and Home WiFi DIY FixCharlie DIYte (CharlieDIYte)2023-07-31 | An update on my recent Starlink Install and How I Fixed my Home Wifi Problems.
SURFSHARK Get an exclusive @Surfshark deal! Enter promo code CHARLIEDIYTE for an extra 3 months free at https://surfshark.deals/charliediyte @Surfshark Explains bit.ly/44SS5d6
0:00 Introduction 0:55 Starlink Update 4:50 Surfshark sponsorship 6:18 Surfshark offer code 8:01 Home Wifi Options 9:58 My Unifi Setup 13:33 Patreon link 14:04 Fixing my Wifi 15:33 Badly terminated cables 17:23 Reconfiguring Unifi 23:19 Subscribe to me!
BRAND AMBASSADORSHIP I'm currently partnering with Ansell whose gloves I've been using for over a year now. Bottom line, I've loved using them long before our tie up so this is a great collaboration that helps support my channel. You can see the gloves I've worn in this video here:
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
Join the WeShop shopping revolution here https://app.we.shop/join-charliewhite, and start earning shares (20% of the value of what you buy) every time you shop. Also check out my exclusive posts under my Profile.** As a founder influencer on WeShop I do earn a small referral commission if you sign up using this link and my username.
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#starlink #unifi #wifiHow to Make Curved Seating for a Hot TubCharlie DIYte (CharlieDIYte)2023-07-22 | How to make curved seating for a hot tub with a bit of help from a local metal shop and some left over decking.
BRAND AMBASSADORSHIP I'm currently partnering with Ansell whose gloves I've been using for over a year now. Bottom line, I've loved using them long before our tie up so this is a great collaboration that helps support my channel. You can see the gloves I've worn in this video here:
0:00 Introduction 0:52 Making the Frames 1:51 Treating the Frames 3:19 Making the Bench Tops 5:41 Decking Oil 6:00 Attaching the Bench Tops 9:31 Subscribe to Me!
TODAY'S TOOLKIT: - Ansell Work Glove Store amzn.to/3PWkcnd - Steel marker pen geni.us/c1IXV (Amazon) - Tracer pencil geni.us/BNrvHX (Amazon) - Bosch electric planer geni.us/Cm9BwT (Amazon) - Ryobi XP RCS18X circular saw - Ryobi circular saw guide
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
Join the WeShop shopping revolution here https://app.we.shop/join-charliewhite, and start earning shares (20% of the value of what you buy) every time you shop. Also check out my exclusive posts under my Profile.** As a founder influencer on WeShop I do earn a small referral commission if you sign up using this link and my username.
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#curved #hottub #seatingTotal Garden RedesignCharlie DIYte (CharlieDIYte)2023-07-09 | Updating you on the renovation - with a total redesign of our garden and costs spiralling out of control...!
0:00 Introduction 0:31 DIYTE Update 1:15 Garden Redesign 3:30 Ground Works 4:30 Can of Worms 9:25 Constructing the Walls 11:33 Project Costs & Budgeting 6:53 Proroll Max Plaster 13:34 Subscribe to Me!
ANSELL BRAND AMBASSADORSHIP I'm currently partnering with Ansell whose gloves I've been using for over a year now. Bottom line, I've loved using them long before our tie up so this is a great collaboration that helps support my channel. You can see the gloves I've worn in this video here:
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
Join the WeShop shopping revolution here https://app.we.shop/join-charliewhite, and start earning shares (20% of the value of what you buy) every time you shop. Also check out my exclusive posts under my Profile.** As a founder influencer on WeShop I do earn a small referral commission if you sign up using this link and my username.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#garden #redesign #DIYHow to DIY Repair a Damaged WallCharlie DIYte (CharlieDIYte)2023-06-17 | How to DIY Repair a Damaged Wall for an invisible repair using a render base and then an unbiased review of Knauf ProRoll Plaster.
BRAND AMBASSADORSHIP I'm currently partnering with Ansell whose gloves I've been using for over a year now. Bottom line, I've loved using them long before our tie up so this is a great collaboration that helps support my channel. You can see the gloves I've worn in this video here:
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
Join the WeShop shopping revolution here https://app.we.shop/join-charliewhite, and start earning shares (20% of the value of what you buy) every time you shop. Also check out my exclusive posts under my Profile.** As a founder influencer on WeShop I do earn a small referral commission if you sign up using this link and my username.
TODAY'S TOOLKIT: - Knauff Proroll Max Plaster bit.ly/3qOX2EI - Knauff Proroll Light Plaster bit.ly/466lQZ1 - Cyklone mixing paddle geni.us/0xuIu (Amazon) - TWO FUSSY BLOKES Mini 4" Roller Frame and Mirofibre Twin Sleeve Set geni.us/TGuLZ (Amazon) - Marshalltown plastering hawk geni.us/wbfJaWL (Amazon) - Ox Pro stainless steel plastering trowel geni.us/8uxE1 (Amazon) - a bit longer than my 11inch but you can't go wrong with one of these. - Ox Pro taping knife geni.us/PsCJW (Amazon) - Hilka plastering set geni.us/RCtX (bucket trowel, plastering trowel, hawk) geni.us/RCtX (Amazon) - Plasterers scarifier geni.us/vpSFaAH (Amazon) - guaging trowel - small tool geni.us/rJK8 (Amazon) - continental filler knives geni.us/eIf7 (Amazon) - Gyproc Easi-Fill bit.ly/3Cw75RI
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#wall #repair #DIYStarlink Setup and ReviewCharlie DIYte (CharlieDIYte)2023-06-04 | How I setup my new Starlink satellite broadband and a full review of the install process and how it's working.
Unfortunately since filming this video the Starlink £99 special offer has been pulled and the discount is now just £11 at £449.
BRAND AMBASSADORSHIP I'm currently partnering with Ansell whose gloves I've been using for over a year now. Bottom line, I've loved using them long before our tie up so this is a great collaboration that helps support my channel. You can see the gloves I've worn in this video here:
0:00 Introduction 0:19 Background 1:22 Why Starlink? 4:31 DIY Chimney Mount 5:14 Safe Chimney Access 8:52 Fixing the Pole to Chimney 11:11 Installation of Dish 12:14 System Performance 15:04 Product Links 15:15 Subscribe to Me!
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
Join the WeShop shopping revolution here https://app.we.shop/join-charliewhite, and start earning shares (20% of the value of what you buy) every time you shop. Also check out my exclusive posts under my Profile.** As a founder influencer on WeShop I do earn a small referral commission if you sign up using this link and my username.
- Starlink ethernet adapter - #UPDATE# turns out the adapter I bought on Amazon was faulty so buy direct from the Starlink if you can but be patient - they're SLOW TO DELIVER... - Self amalgamating tape geni.us/G6XEU (Amazon) - 6 pack drill and tap bit set geni.us/NAd1 (Amazon) - 6 pack pipe clamp support brackets geni.us/eBcqu (Amazon)
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#starlink #setup #reviewHow to Support a Floor and Kitchen UpdateCharlie DIYte (CharlieDIYte)2023-05-26 | How I supported my kitchen ceiling and a full kitchen renovation update - from strengthening joists, chimney demolition, planning through to laying, staining and sealing a new engineered oak floor.
You can become a Charlie DIYte Patron here - patreon.com/charlieDIYte for exclusive behind the scenes content and access to my Discord chat forum.
0:00 Introduction 0:35 Project Recap 1:25 Testing Kit 5:00 Underfloor Heating 6:32 Chimney Demolition 7:28 Strengthening the Ceiling 11:14 Engineered Oak Floor 14:59 Staining & Sealing the Floor 17:09 Internal Wall Insulation 18:27 Product Links 18:40 Subscribe to Me!
Join the WeShop shopping revolution here https://app.we.shop/join-charliewhite, and start earning shares (20% of the value of what you buy) every time you shop. Also check out my exclusive posts under my Profile.** As a founder influencer on WeShop I do earn a small referral commission if you sign up using this link and my username.
TODAY'S TOOLKIT: - Ansell work gloves amzn.to/3PWkcnd - Treatex website treatex.co.uk ** DON'T FORGET THE OFFER CODE CDIY7.5 FOR A 7.5% DISCOUNT - I used Treatex Colour Tone Antique Oak, Treatex Colour Tone Ebony 1litre and 2.5ltrs Treatex Hardwax Oil, in Clear Matt - Engineered Oak Flooring bit.ly/3qgaX6d - Laminate Flooring Ratchet Tie Down Straps bit.ly/3MZriFE - 13mm auger bit geni.us/LJtxj4P (Amazon) - N42 Neodyminium magnet geni.us/YTAz (Amazon) - Tongue tite screws geni.us/jDOV (Amazon)
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI
#floor #strengthening #kitchenupdateWhich floor clamp is the best? #shortsCharlie DIYte (CharlieDIYte)2023-05-24 | I try out three methods of clamping floorboards to demonstrate which floor clamp is the best - for installing my engineered oak flooring.
And for all those carpenters out there who might be thinking that I should have installed noggins or a sub layer with this flooring, it's NOT NECESSARY. These are supreme oak 220mm wide x 21mm thick 10 layer hardwood ply under-core floorboards with a 6mm thick oak top layer. They're tongue and grooved all the way round so they're designed to be laid directly onto joists WITHOUT support on the ends if these finish away from a joist.
You can become a Charlie DIYte Patron here patreon.com/charlieDIYte for exclusive behind the scenes content and automatic entry into my FREE Monthly Giveaway.
* The Amazon links (if any) above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here: bit.ly/3DEE2dI