Uploaded August 2021 | Updated September 2026, 3 weeks ago

---

----Expand for more info---
Compukit UK101 MiSTer FPGA Core
Core: UK101_20210824.rbf
Github: github.com/MiSTer-devel/UK101_MiSTer
Forum Discussion: misterfpga.org/viewtopic.php?f=14&t=3096
Game: Super Invaders
==================================================
Saving and loading of Basic programs can be done via the UART, at 9600 baud.
I used Putty to connect to my MiSTer and upload using minicom.

- Load UK101 core
- Via OSD Change Monitor to MonUK02 (NewMon)
- Press (C)old Start
- Press Return on Memory Size and Terminal Width prompts.
- Type Load then press Enter. (Now UK101 is waiting for a program to be uploaded)

Open Putty on your PC
- Log into MiSTer via Putty SSH
- Start minicom
- Press CTRL+Z then A to bring up the menu
- (P) to bring up Comm Menu and Set baud to 9600
- (S) to send a file. (Select ASCII)
- Navigate to your UK101 games. Press Spacebar to select a folder or file. Highlight the file and press enter. The upload will start on the UK101 MiSTer screen.

Note: For Super Invaders change the baud rate in the UK101 OSD to 300 baud. At 9600 the game will run too fast.
==================================================

==================================================
Buy a Complete MiSTer Setup:
- misteraddons.com
- antoniovillena.es/store
- ultimatemister.com

Mister FPGA Wiki Project:
github.com/MiSTer-devel/Main_MiSTer/wiki

Mister Forum discussion: misterfpga.org

Sorgelig's MiSTer Cores: github.com/MiSTer-devel

MiSTer Facebook page:
facebook.com/groups/1870135613286506

#MiSTerFPGA #CompukitUK101