my mechanics | Mirror Mirror... Wrench Restoration @mymechanics | Uploaded September 2019 | Updated October 2024, 3 hours ago.
In this video i'm restoring a very big old rusty wrench.
Last time I visited my friend I noticed this huge rusty wrench. Its size faszinated me from the first look and that's why I decided to restore it. It's for sure the easiest project I did on this channel so far, but I really enjoyed doing something „smaller“.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Stewen Guyot
Afreeflyingsoul
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
Courtney Maleport
Dan Williams
Gregory
Joan Casanovas
Jonas Richartz
LVE
Marc P
Mellissa Marcus
Paul Ambry
Paul Mampilly
Trevor Kam
TRG Restoration
Vince Valenti
Zachary Grimes
Timestamps:
00:00 preview
00:44 sandblasting
02:43 protect the metal with oil spray
03:14 removing the marks from drop forging with files
03:29 cleaning the file
04:10 sanding with 80,120 and 180 grit
05:01 sanding with 240 and 400 grit by hand
05:40 wet sanding with 400 grit and oil spray
06:13 polishing
07:07 painting
07:58 painting the letters
08:31 removing the masking tape
08:51 showing the finished product
Time and costs of this restoration:
I was working on this project for 4 days
$5 wrench
$7 primer
$11 coat signal blue (RAL 5005)
My camera:
Panasonic HC-V180
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
My Patreon Page:
patreon.com/mymechanics
In this video i'm restoring a very big old rusty wrench.
Last time I visited my friend I noticed this huge rusty wrench. Its size faszinated me from the first look and that's why I decided to restore it. It's for sure the easiest project I did on this channel so far, but I really enjoyed doing something „smaller“.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Stewen Guyot
Afreeflyingsoul
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
Courtney Maleport
Dan Williams
Gregory
Joan Casanovas
Jonas Richartz
LVE
Marc P
Mellissa Marcus
Paul Ambry
Paul Mampilly
Trevor Kam
TRG Restoration
Vince Valenti
Zachary Grimes
Timestamps:
00:00 preview
00:44 sandblasting
02:43 protect the metal with oil spray
03:14 removing the marks from drop forging with files
03:29 cleaning the file
04:10 sanding with 80,120 and 180 grit
05:01 sanding with 240 and 400 grit by hand
05:40 wet sanding with 400 grit and oil spray
06:13 polishing
07:07 painting
07:58 painting the letters
08:31 removing the masking tape
08:51 showing the finished product
Time and costs of this restoration:
I was working on this project for 4 days
$5 wrench
$7 primer
$11 coat signal blue (RAL 5005)
My camera:
Panasonic HC-V180
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
My Patreon Page:
patreon.com/mymechanics
